Socket can be closed either by Zephyr or by peer. In the former case ESP
WiFi chip still notfies about closed socket, which currently results in
printing warning log:
<wrn> wifi_esp: Link X already closed
Change level of this log from warning to debug, so that driver users are
not concerned about situation that is a normal behaviour.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Force sx12xx modems into sleep mode on boot. This is the default state
of the modem when not being used due to the TX/RX complete callbacks.
This reduces current consumption by 600uA before the modems are used
for the first time.
As sleep is the normal state after TX/RX when using the LoRa API, it is
garaunteed that this will not change the behaviour of application code.
LoRaWAN starts by calling Radio.Init(), which resets the modem, so any
sleep configuration we do here is discarded.
Fixes#31567.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
`SENSOR_CHAN_GAUGE_AVG_CURRENT` is currently treated as a capacity
by the MAX17055 driver, however the unit conversion is different
for current and must be calculated separately.
Add a separate method to convert a current reading to milliamps
from 1.5625 uV/R_SENSE units, instead of the 5uVH/R_SENSE conversion
that was previously used.
Tested by comparing value read and converted from MAX17055 with
value from an external power profiling kit.
Signed-off-by: Hayden Ball <hayden@playerdata.co.uk>
This commit lets the Kconfig compliance check run from top of current
git repo instead of only executing inside ZEPHYR_BASE.
This extends the usability of the Kconfig compliance check.
Together with this possibility, a KconfigBasic mode has been added which
will execute the same verification for symbols in the Kconfig tree but
will not check for undefined symbols outside Kconfig.
This is needed as running Kconfig undef check outside the tree in
non-Zephyr repos might pickup `CONFIG_` named symbols in other code.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Change the sorting of test instances if --device-testing is used
within subsets. Test instances are sored depending on the context.
For CI runs the execution order is: "platform1-testA, platform1-testB,
..., platform1-testZ, platform2-testA, ...". For hardware tests, were
multiple platforms can run the tests in parallel, it is more efficient
to run in the order: "platform1-testA, platform2-testA, ...,
platform1-testB, platform2-testB, ..."
This can significantly reduce the tests execution time
for setups with multiple different platforms connected.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The test_mem_domain_migration test creates a new thread with
different priority based on whether SMP is enabled. This causes
an issue where SMP=y and MP_NUM_CPUS=1 where the spin_entry()
would spin forever (with k_busy_wait()) and not yielding since
it has cooperative priority. Fix this by using MP_NUM_CPUS to
figure out which priority to use, as it is valid configuration
to have SMP=y and MP_NUM_CPUS=1.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add some changes to adc sample to enable valid verdict generation
using twister:
-Replace 'single_line' keyword with correct 'one_line'
-Remove parenthesis from the sample output to enable regex verdict
-Add timeout to save time in execution
Additionally, add support for disco_l475_iot1.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
For multiple channels detection, channels variable was compared with
the output of find_lsb_set which actually is a decimal number.
Since channel is a bitfield the comparison was not behaving as
expected (detecting several channels while only one channel was used).
Rework the code to use the already existing bitfield "index" for
the test.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Timeout parameter was not definied clearly. Added clarification together
doxygen links to events used in the description.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove the deprecated bt_conn_create_slave_le function.
This was deprecated in the 2.3.0 release.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the deprecated bt_conn_security function.
This has been deprecated in the 2.3.0 release.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the deprecated connection create API functions.
These have been deprecated in the 2.3.0 release.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the deprecated Advertising Types definitions.
These have been deprecated in the 2.3.0 release.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the deprecated BT_BUF_USER_DATA_MIN macro.
This was deprecated for the 2.3.0 release.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the deprecated security level define and the HCI error
code for authentication failure.
These have been deprecated since the 2.0.0 release.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the deprecated scan filter duplicate enum values and parameter.
This was deprecated for the 2.3.0 release.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Changes to .buildkite/daily.yml don't make any sense to run twister
for since issues will only be seen when the daily builds run so add
it to the twister_ignore.txt list.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
West has introduced support for group tags in:
https://github.com/zephyrproject-rtos/west/pull/454
This means that manifest files might start containing groups.
Zephyr itself only requires west>=0.7.2 where groups are not supported
but other Zephyr based projects might start using the group feature.
When using a west version with group support, then only active projects
will be processed as Zephyr modules.
West versions without group support will consider all projects active.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes problem when fs_open invoked on fs_file_t object, which is already
holding information on opened file, overwrites references to other
memory objects within the fs_file_t object causing resource leak.
If fs_open is invoked on already used fs_file_t object, it will return
-EBUSY.
Note: The change requires that all fs_file_t objects should be
initialized to 0.
Fixes: #29478
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The fs_file_t_init() function has been added that should be used
for initialization of fs_file_t structures before passing them
to fs_open and other functions.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Conform to Bluetooth Specification, if the LE_Scan_Enable
parameter is set to 0x01 and scanning is already enabled,
any change to the Filter_Duplicates setting shall take
effect. Disabling scanning when it is disabled has no
effect.
Fixes#31019.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There was one case where the dummy policy was returning a wrong type
in the function pm_policy_next_state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Major changes:
- move related functions together
- optimize add_map() not to walk the page tables *twice* on
every loop
- properly handle leftover size when a range is already mapped
- don't overwrite existing mappings by default
- return an error when the mapping fails
and make the code clearer overall.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Document the existence of the new API that allows constrol of power
management infrastructure, and support for associating power management
dependencies in devicetree.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
There was a regression when implementing automatic AT+CWMODE{,_CUR}
handling based on driver needs. ESP AT 1.7 firmware does not support
AT+CWMODE_CUR=0, which means that radio needs to be either in STA, AP or
STA+AP mode (no NONE state available).
Fix ESP AT 1.7 compatibility by keeping radio in STA mode whenever it is
not used.
Move also first AT+CWMODE_CUR invocation before AT+CWDHCP_CUR, so that
the latter executes successfully with ESP AT 1.7.
Fixes: 03ce61004b ("drivers: wifi: esp: control CWMODE depending on
current needs")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Basic explanation of what this test is doing, was missed in the commit
where the test was added.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The ',' character was used as line terminator instead of ';'
in SPI routines. The three affected drivers were not showing
any issue, but the typo is fixed for clarity.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The _save_old() to return early if <filename> is not file (or symlink
to a file).
This is simplest alternative to avoid attempt to rename /dev/null
(which could succeed).
This also keeps fifos (perhaps nonexistent potential usage but
this is nicer).
If <filename> were directory or socket, after shutil.copyfile(),
writing to the file (by caller, _write_config()), would fail.
Fixes#31362
Co-authored-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Signed-off-by: Tomi Ollila <tomi.ollila@iki.fi>
The commit fixes three things:
- the order of zassert_* checks has been often incorrect, and some
checks of values have been done after some other operations has
been performed;
- some operations have been missing checks at all;
- most of zassert_* messages have been given ret parameter to be
printed but it has been missing from format string.
This addresses:
Coverity CID :215714
GH Issue: #31668
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
These Git refs are used by west as a scratch space. Let that be known,
but don't make any other guarantees.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
