In order to address the requirements of the kernel boot process, an
optional ISR-specific function is declared to allow entropy collection
outside of thread mode and without using any kernel primitives. It also
includes a parameter to optionally busy-wait for hardware entropy
generation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This keeps biting us; sanitycheck turns on assertions by
default for tests, but standalone builds, or builds done
for other test infrastructure do not. Put all builds in
the same state.
Specific tests (such as benchmarks) can override this with
CONFIG_FORCE_NO_ASSERT.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Allow check-compliance.py to be run from any path with a valid Git tree,
removing the unnecessary and artificial limitation imposed in the case
of gitlint.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Noticed in docs.zephyrproject.org/subsystems/test/sanitycheck.html that
the first column of the option table display is too narrow (for short
option names that are shown on the same line as the description). This
PR tweaks the CSS to widen the first column enough to stop wrapping in
most cases.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
CONFIG_UART_NSIM depends on CONFIG_NSIM, which was removed in commit
9bc69a46fa ("boards: Update arc em_starterkit support from 2.2 to
2.3"). Remove the dependency, and also remove the CONFIG_NSIM=y setting
from the test_nsim test (which should now work).
Also change the condition for EXTERN()ing _VectorTable in
include/arch/arc/v2/linker.ld to check CONFIG_UART_NSIM instead of
CONFIG_NSIM. I'm guessing the EXTERN() is there to make the symbol
visible to nSIM, though I don't know anything about it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
According to INTEL-SA-00115[1], Intel(r) Atom(tm) Processor E Series
are affected. All Minnowboards sports one of these processors.
[1]: https://goo.gl/CKyLQy
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
In order to mitigate against Spectre V4, add an option that will, at
boot time, verify if the CPU supports the SPEC_CTRL MSR; if so, it'll
attempt to disable the feature.
More information can be found in chapter 4 (Speculative Store Bypass
Mitigation) of the "Speculative Execution Side Channel Mitigations"
document, version 2, published by Intel: https://goo.gl/nocTcj
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Introduce a Kconfig option (CONFIG_OPENAMP_SRC_PATH) that allows us to
point to an external copy of open-amp.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce a Kconfig option (CONFIG_LIBMETAL_SRC_PATH) that allows us to
point to an external copy of libmetal.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Show the value of each symbol in the jump-to dialog.
- Search names and prompts separately in the jump-to dialog.
Previously, '_BAR$' wouldn't match FOO_BAR if it had a prompt,
because '_BAR$' was matched against the string 'FOO_BAR "prompt"'.
- Show the working directory in save/load dialog boxes. Paths will be
relative to it, and Carles Cufi pointed out that it might not be
obvious.
Also allow ~ to be used to refer to the home directory.
- Implement scroll offset for edit boxes. This makes it clearer when
they're scrolled horizontally.
Piggyback an update of Kconfiglib to the latest version (no functional
changes).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Setting of CONFIG_HEAP_MEM_POOL_SIZE was done in the board defconfig
because open-amp was doing recursive builds and setting it the
defconfig made sure all builds were consistent. However, now that we
don't do recursive builds this will get properly picked by from the
sample specific conf file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The STM32L4x2 SoCs need to control the isolation of the USB features
from VDDUSB. This is done through the PWR_CR2 bit USV, however the
current code checks for the PWR_CR2_PVME1 bit instead, which is only
available on Cat. 3 devices. This bug is also present int the HAL and
likely copied from there.
Replace the check by PWR_CR2_USV instead.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The STM32L4x2 SoCs need to control the isolation of the USB features
from VDDUSB. This is done through the PWR_CR2 bit USV. The STM32L4 HAL
in stm32l4xx_ll_pwr.h wrongly checks for the PWR_CR2_PVME1 bit, which
is only available on Cat. 3 devices. Replace the check by PWR_CR2_USV
like it is already done in stm32l4xx_hal_pwr_ex.c.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The STM32L432 SoC has a standard non-OTG USB controller. Add an entry
for it in stm32l432.dtsi and add the corresponding DTS fixup entries.
The controller is kept disabled and should be enabled at the board
level.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
USB OTG is currently enable for the whole STM32L4 family, while only a
few of them actually support it:
- STM32L475, STM32L476 and STM32L496 have an OTG controller
- STM32L432, STM32L433 and STM32L452 have an USB controller
- STM32L431, STM32L451 and STM32L471 do not have any USB controller
Fix that by moving the DT entry from stm32l4.dtsi to stm32l475.dtsi
and by adding a #ifdef #endif around the corresponding DTS fixup
entries.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
With recent changes to open-amp we can now include and build it directly
as a zephyr library rather than doing a recursive make. We remove
ext/lib/ipc/open-amp.cmake as part of this change and introduce a
Kconfig option for open-amp.
Fixes: #7673
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Pull in a slightly more recent version of open-amp with changes
to the build system to improve integration with Zephyr. The recent
changes let us embedded open-amp without having to use recursive
building.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move open-amp to be in ext/lib/ipc/open-amp/open-amp. This allows us to
be Zephyr specific files and config like README (for import),
CMakeLists.txt file, Kconfig, etc in ext/lib/ipc/open-amp/ that don't
conflict with any files that might have the same name in
ext/lib/ipc/open-amp/open-amp.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
With recent changes to libmetal we can now include and build it directly
as a zephyr library rather than doing a recursive make. We remove
ext/hal/libmetal.cmake as part of this change and introduce a Kconfig
option for libmetal.
This is a partial fix for issue #7673.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Pull in a slightly more recent version of libmetal with changes
to the build system to improve integration with Zephyr. This change
will break anything that builds with Zephyr and libmetal (which at this
point is only the open-amp example). Will fix that shortly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
libmetal itself isn't an ipc library, its a generic HAL abstraction
library so move it into ext/hal where it belongs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When the RTC support get added we had a select on HAS_RTC, however this
Kconfig symbol didn't exist. Clean this up to match the pattern of
HAS_MCUX_RTC. The driver now depends on that and the SoC selects it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The {FLASH,SRAM}_BASE_ADDRESS Kconfig symbols were removed in commit
311e6b9e3e ("arch: arc: Use DTS for all ARC SoCs"). These settings are
supposed to come from DTS now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
gdb_server was removed in commit 0f669132a0 ("kernel: remove
gdb_server"), but still has a testcase that sets CONFIG_GDB_SERVER=y,
and some code in arch/x86/debug.
Remove the leftover parts. This also gets gets rid of undefined
references to the CONFIG_GDB_SERVER symbol.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_GROVE_TEMPERATURE_SENSOR_V1_1 never existed.
CONFIG_GROVE_TEMPERATURE_SENSOR_V1_X has help text "Version 1.1 or 1.2".
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This symbol was removed in commit 33118f9212 ("sensor: grove: use
global sensor init priority"), which switched over to using
CONFIG_APPLICATION_INIT_PRIORITY.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some code was developped around MPU support in ealy stage
of feature introduction. This code was gated under MPU_ENABLE
flag which does not exist and hence code has never been
enabled nor tested.
Since there has been futher MPU development since then, it seems
safer to simply remove that code and associated Kconfig symbols
to avoid that someone starts using it while it was not part of
MPU development track.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
USB IP is not directly available on disco_l475_iot1 and requires
some HW modifications to get it enabled.
Remove this USB pinmux configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In stm32 clock_control driver, Kconfig symbol CLOCK_STM32_PLL_PREDIV1
in stm32f3 series was set as conditional on the activation of some
specific STM32F3 SoCs that are not supported yet in Zephyr.
Remove this flag.
In order not to loose a rather studious part of code, comment it out
and set a TODO to specify how to re-enable it once it will be
required.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
During transition from native to ll based clock_control
driver, a typo was introduced in PPL source selection flag.
Fix this.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The support for Galileo board is bitrotted as the config file
contains obsolete values. As testing this old board is difficult
lets remove the config files. These can be re-introduced with
proper and tested settings if needed.
Fixes#7814
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Zephyr code routinely assumes conventional ILP32/LP64 integer
behavior, and occasionally relies on it to perform some nice tricks.
This is despite the fact that this behavior (while pervasively adopted
and in use on all architectures we care about supporting) isn't
actually guaranteed by the language standard which allows much looser
semantics than actual exist on hardware.
Put it into the intmath section of this test as a build time thing.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We generalize querying the entropy driver directly with
a new internal API, which is now used by CONFIG_STACK_RANDOM
and stack canary initialization.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
