This was apparently intended to allow for per-arch linker includes,
but no such includes ever existed. All it does is senselessly throw
an error on unrecognized architectures. Yank.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Adds support for the device configuration data (DCD), which provides a
sequence of commands to the imx rt boot ROM to initialize components
such as an SDRAM.
It is now possible to use the external SDRAM instead of the internal
DTCM on the mimxrt1020_evk, mimxrt1050_evk, and mimxrt1060_evk. Note,
however, that the default board configurations still link data into
internal DTCM, therefore you must use a device tree overlay to override
"zephyr,sram = &sdram0"
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds support for the boot data, image vector table, and FlexSPI NOR
config structures used by the imx rt boot ROM to boot an application
from an external xip flash device.
It is now possible to build and flash a bootable zephyr image to the
external xip flash on the mimxrt1020_evk, mimxrt1050_evk, and
mimxrt1060_evk boards via the 'ninja flash' build target and jlink
runner. Note, however, that the default board configurations still link
code into internal ITCM, therefore you must set CONFIG_CODE_HYPERFLASH=y
or CONFIG_CODE_QSPI=y explicitly to override the default. You must also
set CONFIG_NXP_IMX_RT_BOOT_HEADER=y to build the boot header into the
image.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit adds minor improvements to the documentation of the
linker symbols related to Application Shared Memory.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This reverts commit 140863f6a7.
This was found to be causing problems with certain linkers which
generate different code depending on whether a symbol is weak or
not.
Fixes#11916
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add symbol which contains the number of bytes contained
in the image.
Using '_image_rom_end' will not work, as there are
symbols loaded after its value.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Add a "nocache" read-write memory section that is configured to
not be cached. This memory section can be used to perform DMA
transfers when cache coherence issues are not optimal or can not
be solved using cache maintenance operations.
This is currently only supported on ARM Cortex M7 with MPU.
Fixes#2927
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There's no current need for this and it makes work items
declared with K_WORK_DEFINE() inaccessible to user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
.gnu.linkonce is an internal undocumented ld feature.
Just use __weak, which does the same thing we want.
This is only done for _sw_isr_table. _irq_vector_table
is left alone due to unwanted interactions between
__weak and the ld KEEP() directive.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We now place the linker directives for the SW ISR table
in the common linker scripts, instead of repeating it
everywhere.
The table will be placed in RAM if dynamic interrupts are
enabled.
A dedicated section is used, as this data must not move
in between build phases.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
(Previous patch set was reverted due to issue with priv_stack.
Resubmitting after fixing the faults caused by priv_stack.noinit
not at the end of RAM.)
This adds a linker flag and necessary changes to linker scripts
so that linker will warn about orphan sections.
Relates to #5534.
Fixes#10473, #10474, #10515.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This puts the priviledged stack at the end of RAM.
This combines PR #10507 and #10542.
Fixes#10473Fixes#10474Fixes#10515
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add monochrome character framebuffer for monochrome
graphic dot matrix displays and electrophoretic displays.
These displays are mostly monochrome and can only display
black and some other color, for example white. Typically,
a byte controls 8 pixels, arranged vertically or horizontally
depending on the controller or settings.
The API is not suitable to display graphics, the purpose is
to display text or symbols. It is possible to use several fonts.
A font can also consist of graphic symbols only and thus,
for example, enable the realization of a menu.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Update rel-sections.ld to use wildcards instead of
spelling out those sections one by one.
Also, for POSIX, don't include this and turns off
the warnings. With different host toolchain across
different OS, it would be maintanence nightmare
to account for all those combinations. So this reverts
the POSIX linker script to before the first orphan
section changes.
Fixes#10493
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are sections defined in common-rom/ram.ld where they are
showing up as orphan sections. So add these as known sections.
Fixes#10493
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch adds Big Endian architecture support. Even if a compiler
generating big endian object files is used, our linker script, or
include/linker/linker-tool-gcc.h to be precise, has default output
format as little endian.
This patch adds a hidden config CONFIG_BIG_ENDIAN, which should be set
by big endian architectures or a SoC's, and adds an condition to
switch OUTPUT_FORMAT in our linker.cmd.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
This adds a linker flag and necessary changes to linker scripts
so that linker will warn about orphan sections.
Relates to #5534.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The CCM section name macros are missing the leading period.
Add the period so those items supposed to be in CCM sections
are actually being placed correctly.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of hardcoding in linker script, use a Kconfig and deal with
dependencies in Kconfig instead of directly in the linker file.
This patch moves both:
PRIVILEGED_STACK_TEXT_AREA
and
KOBJECT_TEXT_AREA
to arch/Kconfig.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
New shell support features like:
- multi-instance
- command tree
- static and dynamic commands
- multiline
- help print function
- smart tab (autocompletion)
- meta-keys
- history, wildcards etc.
- generic transport (initially, uart present)
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Rename _DEVICE_STRUCT_SIZE to _DEVICE_STRUCT_SIZEOF. This causes it to
be picked by the script 'gen_offset_header.py' and inserted into the
header file 'include/generated/offsets.h'.
Renaming from x_SIZE to x_SIZEOF will align it's name with the other
symbols that denote a sctruct's size, like K_THREAD_SIZEOF.
Furthermore, it will allow the symbol to be accessed through a header
file define, instead of only as an extern symbol. This is more
flexible, and more aligned with the other symbols in offsets.
Finally, if we are able to move all of offsets.c symbols into the
offsets.h header file we be able to remove offsets.o from the link and
thereby simplify the linking process.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This rewrites the implementation of the APP_INPUT_SECTION and
KERNEL_INPUT_SECTION macros such that an unbounded amount of
kernelspace libraries can be used.
This resolves#7703
The new implementation has a caveat/limitation; the linker script
developer must invoke APP_INPUT_SECTION before KERNEL_INPUT_SECTION.
All in-tree linker scripts happened to already be doing this so no
in-tree porting was necessary.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Minor refactoring and commenting of the _SECTION infrastructure in
preparation for future improvements.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This commit adds K-config options that allow the user to
signify an ARM Secure Firmware that contains Secure Entry
functions and to define the starting address of the linker
section that will contain the Secure Entry functions. It
also instructs the linker to append the NSC section if
instructed so by the user.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Kernel threads created at build time have unique indexes to map them
into various bitarrays. This patch extends these indexes to
dynamically created threads where the associated kernel objects are
allocated at runtime.
Fixes: #9081
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Summary: revised attempt at addressing issue 6290. The
following provides an alternative to using
CONFIG_APPLICATION_MEMORY by compartmentalizing data into
Memory Domains. Dependent on MPU limitations, supports
compartmentalized Memory Domains for 1...N logical
applications. This is considered an initial attempt at
designing flexible compartmentalized Memory Domains for
multiple logical applications and, with the provided python
script and edited CMakeLists.txt, provides support for power
of 2 aligned MPU architectures.
Overview: The current patch uses qualifiers to group data into
subsections. The qualifier usage allows for dynamic subsection
creation and affords the developer a large amount of flexibility
in the grouping, naming, and size of the resulting partitions and
domains that are built on these subsections. By additional macro
calls, functions are created that help calculate the size,
address, and permissions for the subsections and enable the
developer to control application data in specified partitions and
memory domains.
Background: Initial attempts focused on creating a single
section in the linker script that then contained internally
grouped variables/data to allow MPU/MMU alignment and protection.
This did not provide additional functionality beyond
CONFIG_APPLICATION_MEMORY as we were unable to reliably group
data or determine their grouping via exported linker symbols.
Thus, the resulting decision was made to dynamically create
subsections using the current qualifier method. An attempt to
group the data by object file was tested, but found that this
broke applications such as ztest where two object files are
created: ztest and main. This also creates an issue of grouping
the two object files together in the same memory domain while
also allowing for compartmenting other data among threads.
Because it is not possible to know a) the name of the partition
and thus the symbol in the linker, b) the size of all the data
in the subsection, nor c) the overall number of partitions
created by the developer, it was not feasible to align the
subsections at compile time without using dynamically generated
linker script for MPU architectures requiring power of 2
alignment.
In order to provide support for MPU architectures that require a
power of 2 alignment, a python script is run at build prior to
when linker_priv_stacks.cmd is generated. This script scans the
built object files for all possible partitions and the names given
to them. It then generates a linker file (app_smem.ld) that is
included in the main linker.ld file. This app_smem.ld allows the
compiler and linker to then create each subsection and align to
the next power of 2.
Usage:
- Requires: app_memory/app_memdomain.h .
- _app_dmem(id) marks a variable to be placed into a data
section for memory partition id.
- _app_bmem(id) marks a variable to be placed into a bss
section for memory partition id.
- These are seen in the linker.map as "data_smem_id" and
"data_smem_idb".
- To create a k_mem_partition, call the macro
app_mem_partition(part0) where "part0" is the name then used to
refer to that partition. This macro only creates a function and
necessary data structures for the later "initialization".
- To create a memory domain for the partition, the macro
app_mem_domain(dom0) is called where "dom0" is the name then
used for the memory domain.
- To initialize the partition (effectively adding the partition
to a linked list), init_part_part0() is called. This is followed
by init_app_memory(), which walks all partitions in the linked
list and calculates the sizes for each partition.
- Once the partition is initialized, the domain can be
initialized with init_domain_dom0(part0) which initializes the
domain with partition part0.
- After the domain has been initialized, the current thread
can be added using add_thread_dom0(k_current_get()).
- The code used in ztests ans kernel/init has been added under
a conditional #ifdef to isolate the code from other tests.
The userspace test CMakeLists.txt file has commands to insert
the CONFIG_APP_SHARED_MEM definition into the required build
targets.
Example:
/* create partition at top of file outside functions */
app_mem_partition(part0);
/* create domain */
app_mem_domain(dom0);
_app_dmem(dom0) int var1;
_app_bmem(dom0) static volatile int var2;
int main()
{
init_part_part0();
init_app_memory();
init_domain_dom0(part0);
add_thread_dom0(k_current_get());
...
}
- If multiple partitions are being created, a variadic
preprocessor macro can be used as provided in
app_macro_support.h:
FOR_EACH(app_mem_partition, part0, part1, part2);
or, for multiple domains, similarly:
FOR_EACH(app_mem_domain, dom0, dom1);
Similarly, the init_part_* can also be used in the macro:
FOR_EACH(init_part, part0, part1, part2);
Testing:
- This has been successfully tested on qemu_x86 and the
ARM frdm_k64f board. It compiles and builds power of 2
aligned subsections for the linker script on the 96b_carbon
boards. These power of 2 alignments have been checked by
hand and are viewable in the zephyr.map file that is
produced during build. However, due to a shortage of
available MPU regions on the 96b_carbon board, we are unable
to test this.
- When run on the 96b_carbon board, the test suite will
enter execution, but each individaul test will fail due to
an MPU FAULT. This is expected as the required number of
MPU regions exceeds the number allowed due to the static
allocation. As the MPU driver does not detect this issue,
the fault occurs because the data being accessed has been
placed outside the active MPU region.
- This now compiles successfully for the ARC boards
em_starterkit_em7d and em_starterkit_em7d_v22. However,
as we lack ARC hardware to run this build on, we are unable
to test this build.
Current known issues:
1) While the script and edited CMakeLists.txt creates the
ability to align to the next power of 2, this does not
address the shortage of available MPU regions on certain
devices (e.g. 96b_carbon). In testing the APB and PPB
regions were commented out.
2) checkpatch.pl lists several issues regarding the
following:
a) Complex macros. The FOR_EACH macros as defined in
app_macro_support.h are listed as complex macros needing
parentheses. Adding parentheses breaks their
functionality, and we have otherwise been unable to
resolve the reported error.
b) __aligned() preferred. The _app_dmem_pad() and
_app_bmem_pad() macros give warnings that __aligned()
is preferred. Prior iterations had this implementation,
which resulted in errors due to "complex macros".
c) Trailing semicolon. The macro init_part(name) has
a trailing semicolon as the semicolon is needed for the
inlined macro call that is generated when this macro
expands.
Update: updated to alternative CONFIG_APPLCATION_MEMORY.
Added config option CONFIG_APP_SHARED_MEM to enable a new section
app_smem to contain the shared memory component. This commit
seperates the Kconfig definition from the definition used for the
conditional code. The change is in response to changes in the
way the build system treats definitions. The python script used
to generate a linker script for app_smem was also midified to
simplify the alignment directives. A default linker script
app_smem.ld was added to remove the conditional includes dependency
on CONFIG_APP_SHARED_MEM. By addining the default linker script
the prebuild stages link properly prior to the python script running
Signed-off-by: Joshua Domagalski <jedomag@tycho.nsa.gov>
Signed-off-by: Shawn Mosley <smmosle@tycho.nsa.gov>
Adding new implementation of logging subsystem. New features
includes: support for multiple backends, improving performance
by deferring log processing to the known context, adding
timestamps and logs filtering options (compile time, runtime,
module level, instance level). Console backend added as the
example backend.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
intList has been populated with the number of isrs, aka interrupts,
but nothing has not been using this information so we drop it and
everything used to construct it.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Since USB Binary Device Object Store (BOS) descriptor might be defined
in several places create usb_bos_desc section.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This is a migration from using code generation to using the C language
which we in the general case we should aways strive towards.
It is equivalent to the simplification that was done with
_irq_spurious here:
https://github.com/zephyrproject-rtos/zephyr/pull/7574
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Instead of finding the address of the spurious irq function in the
intList section we now rely on the linker to find the address in the
_irq_spurious symbol.
This is a migration from using code generation to using the C language
which we in the general case we should aways strive towards.
In this specific case it makes the generated code 'irq_tables.c'
easier to read as we replace magic numbers with the &_irq_spurious
token.
Also, the path through the build system that _irq_spurious makes is
much shorter, so it is much easier for a user to understand how it is
used.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This patch adds a RAM section for the USB descriptors and
USB interfaces data.
The parts of USB descriptor can be declared independently in
different USB class drivers or functions. These must then be
placed in a predefined order one after the other without gaps
in a RAM section. There may also be several device descriptors
in the section such as for USB DFU.
Since at runtime the number of interfaces and endpoints in the
composite device descriptor is unknown, they must be corrected.
The class drivers or functions use the usb_cfg_data struct to
store the callbacks, interface and endpoints data. This struct
must also be corrected and needs to be placed in the data section.
The descriptor section and data section must be processed by
the USB Device Stack before the enumeration.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add a new linker section for a list of submodule settings handlers,
and iterate the list from the various settings callbacks.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A red-black tree is maintained containing the metadata for all
dynamically created kernel objects, which are allocated out of the
system heap.
Currently, k_object_alloc() and k_object_free() are supervisor-only.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
With this commit it is possible to add priority to sent or received
network packets. So user is able to send or receive higher priority
packets faster than lower level packets.
The traffic class support is activated by CONFIG_NET_TC_COUNT option.
The TC support uses work queues to separate the traffic. The
priority of the work queue thread specifies the ordering of the
network traffic. Each work queue thread handles traffic to one specific
work queue. Note that you should not enable traffic classes unless
you really need them by your application. Each TC thread needs
stack so this feature requires more memory.
It is possible to disable transmit traffic class support and keep the
receive traffic class support, or vice versa. If both RX and TX traffic
classes are enabled, then both will use the same number of queues
defined by CONFIG_NET_TC_COUNT option.
Fixes#6588
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The STM32 has special Core Coupled Memory, ccm for short, that can
only be accessed through the CPU and can not be use for DMA.
The following 3 sections have been added.
- ccm_bss for zero initialized data
- ccm_data for initialized data
- ccm_noinit for uninitialized data
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
This patch adds the generation and incorporation of privileged stack
regions that are used by ARM user mode threads. This patch adds the
infrastructure for privileged stacks. Later patches will utilize the
generated stacks and helper functions.
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch does several things, most notably it changes the semantics
of CONFIG_DEBUG. CONFIG_DEBUG continues to behave as a vaguely defined
"debug mode" that enables printf's, -Og, etc. but now the user may
choose to be in "debug mode" while using a different optimization
level than -Og.
Tp support this a new config is defined to enable -Og;
CONFIG_DEBUG_OPTIMIZATIONS.
Additionally CONFIG_SIZE_OPTIMIZATIONS is introduced to allow the user
to explicitly request optimizing for size instead of relying on
defaulting to it.
The three config's {NO,SIZE,DEBUG}_OPTIMIZATIONS are now organized in
a Kconfig choice to ensure that at most one can be enabled at a time.
Finally, selected users of CONFIG_DEBUG have been ported to use one of
the optimizations configs when it was clear from usage that the
intention was to behave differently when using a different
optimization level and not when in "debug mode".
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The linker script places kernelspace and userspace archives in
different sections. But the linker script itself does not determine
what archives are in what space, that is done by CMake.
CMake passes the list of kernelspace archives to the linker script
through defines, like this:
-DNUM_KERNEL_OBJECT_FILES=3
-DKERNEL_OBJECT_FILE_0=path/to/archive_a.a
-DKERNEL_OBJECT_FILE_1=path/to/archive_b.a
-DKERNEL_OBJECT_FILE_2=path/to/archive_c.a
These paths are relative, and since Ninja and Make invoke the linker
with different "working directories"[0], the relative paths need to be
different. This patch rectifies the relative path when using Ninja.
This fixes#5343
[0] https://gitlab.kitware.com/cmake/cmake/issues/17448
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
A new arch (posix) which relies on pthreads to emulate the context
switching
A new soc for it (inf_clock) which emulates a CPU running at an
infinely high clock (so when the CPU is awaken it runs till completion
in 0 time)
A new board, which provides a trivial system tick timer and
irq generation.
Origin: Original
Fixes#1891
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
