Code removed:
- IT8XXX2 doesn't support soc level software interrupt hence remove
them.
- To use common macro to access csr (control status register).
- To remove CONFIG_RISCV_HAS_PLIC related code. IT8XXX2 uses its own
interrupt controller code.
- To remove ite_write and ite_read. We don't use them anymore.
Code changed:
- Return true from arch_irq_is_enabled() when external interrupt-enable
bit, and SOC's IER are both true.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
A few HAS_HW_NRF_* Kconfig options for peripherals available in nRF5340
are not selected. Fix it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add check that can be removed by the compiler since the rest is only
needed when multiple identities have been enabled.
Fixes: #38134
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Removed the bt_conn_unref from the deferred_work function.
For ISO, the conn unref for the peripheral will happen in
the bt_iso_disconnected function. For the central, the
unref shall only happen when the CIG is terminated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the sample.yaml files for the modbus samples:
- depends_on entries should just be space separated, drop the comma
- add the platform referenced in the documentation to platform_allow
- replace the deprecated dt_compat_enabled_with_alias with
dt_enabled_alias_with_parent_compat
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
This has been unreferenced since:
4ff616b647 modbus: rework interface configuration
This generates a compiler warning, but it went unnoticed because the
sample test is configured incorrectly and not running.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add support for signing i.MX8QXP SOF with Zephyr images with rimage.
i.MX8QXP and i.MX8QM have the same board-level definitions,
so we use the generic imx8.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add support for i.MX8QXP board by defining defconfig,
board configuration and device tree.
This is very similar with i.MX8QM board and uses the
same SoC and dts/xtensa/nxp/nxp_imx8.dtsi.
From Audio DSP point of view, i.MX8QXP has a
1 Xtensa HiFi4 core, with 64 KB TCM,
448 KB OCRAM, 8MB SDRAM and 1 ESAI, 1 SAI as
audio interfaces.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
This is an area that is quickly growing and changing. Better having
someone taking a look at the incoming patches.
Set myself and Arnaud as maintainers.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Log failure to register authentication handlers since returning errors
from the shell is not visible to the user.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle return value of GATT service register and unregister functions.
Log action to shell.
Fixes: #38013
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix the broken logic in the kernel/thread_stack test
The modified test should do direct read & write from estimated stack
pointer to highest address in the stack buffer.
Previously this test was start from lowest address in the stack
which would trigger exception of hardware stack checking scheme
violation on ARC boards and other targets with hardware stack
overflow detection.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
Finetune coap_server sample parameters for better user experience.
Reduce the maximum retransmission count to release resources earilier in
case client is unreachable and no longer responds. Increase the maximum
number of pending retransmissions, along with the heap size (the buffers
for messages are allocated on a heap), to improve sample responsiveness,
in case multiple unreplied messages are pending retransmission.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case no reply is received for notification message, remove the
corresponsding observer since it's no longer reachable, freeing slot for
another one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The retransmission handler only increased the retransmission count, w/o
sending the actual message again. Additionally, the next retransmission
time calculation was broken - it did not take into consideration the
time that has already passed since before retransmission, and re-applied
the entire timeout value.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
binary_f16 and binary_f16.fpu test cases fail when target
SRAM size is below 140k.
Update test case requirements to set min_ram to 144.
Additionally, remove the platform_exclude hich is now useless
(frdm_kw41z ram is 128k).
Fixes#38826
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Check the return value of bt_rand when creating identities.
Failure to generate a random IRK would result in the privacy feature
being compromised.
Fixes: #38120
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix unexpected control flow in host keys module. A continue in a do
while false act the same as a break. This entire construct can be
replaced with a simple if else control flow.
Fixes: #38014
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Check len is not zero before accessing data pointer, the len variable
is not checked before this point so cannot be trusted to not be zero.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The socket API was updated with mutex protection, however this
was not reflected in the documentation. Remove the obsolete note on the
thread-safety status of the socket API, to prevent confusion.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Ensure that length variables (len0, len1, len2) are positive
before they are used for array indexing.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update sam0 i2c driver to directly send/receive next message if it is
in the same direction and the current message has no stop or restart
flags. Seems like in some drivers this is the expected behaviour.
Fixes#36857
Signed-off-by: Christoffer Zakrisson <rustypig91@gmail.com>
Fixes an issue whereby the application is configured for extended
advertising mode but advertises in legacy mode with a large device name
which should be limited to 31 bytes
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
The struct was declared twice (once as an opaque type) in
iso.h, but was unneeded. Removed to avoid confusion about
whether it is an opaque type.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixed discrepancy between documentation and actual returned
error code when API is not enabled or not supported by a
device. Added detection of case when device does not implement
uart_callback_set but ASYNC api is enabled. Returning -ENOSYS in
that case.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add some details on the changes made in the device power management area
(callback simplification).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The st7789v_transmit function does not return any error code (void), so
ret = st7789v_transmit(...) is wrong.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Ignore the return value of the bt_gatt_change_aware function when the
client is reading the database hash characteristic value. This is the
point where the client becomes change-aware, so nothing else should be
done if the client is change-unaware.
Fixes: #38012
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is a regression introduced in b8770acc28 when
aligning with BT Core Spec 5.3 naming convention.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Updates wording in Coding Guidelines page to remove outdated timelines
and correct the criteria for each stage. Changes reflect that we are
in stage 1 and will not reach stage 2 until the CI for enforcing
coding guidelines has been established.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
