michaelh/zephyr
1
0
Fork 0
Code Releases Activity

boards: drop explicit --gdb-serial

Browse source 
Now that the well known udev BMP port is used automatically, drop it
from the board files.

Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
This commit is contained in:
Fabio Baltieri 2023-01-17 22:55:03 +00:00 • committed by Carles Cufí
commit 69dde41611
3 changed files with 1 additions and 4 deletions
Download patch file Download diff file Expand all files Collapse all files

1
boards/arm/adafruit_feather_nrf52840/board.cmake
View file

@ -2,7 +2,6 @@
board_runner_args(jlink "--device=nRF52840_xxAA" "--speed=4000")
board_runner_args(pyocd "--target=nrf52840" "--frequency=4000000")
board_runner_args(blackmagicprobe "--gdb-serial=/dev/ttyBmpGdb")
include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)
include(${ZEPHYR_BASE}/boards/common/pyocd.board.cmake)
include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)

2
boards/arm/lora_e5_dev_board/board.cmake
View file

@ -5,7 +5,7 @@ board_runner_args(pyocd "--flash-opt=-O reset_type=hw")
board_runner_args(pyocd "--flash-opt=-O connect_mode=under-reset")
board_runner_args(jlink "--device=STM32WLE5JC" "--speed=4000" "--reset-after-load")
board_runner_args(stm32cubeprogrammer "--port=swd" "--reset-mode=hw")
board_runner_args(blackmagicprobe "--gdb-serial=/dev/ttyBmpGdb" "--connect-rst")
board_runner_args(blackmagicprobe "--connect-rst")
include(${ZEPHYR_BASE}/boards/common/pyocd.board.cmake)
include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)

2
boards/arm/rpi_pico/board.cmake
View file

@ -27,8 +27,6 @@ board_runner_args(openocd --cmd-pre-init "set_adapter_speed_if_not_set 2000")
board_runner_args(jlink "--device=RP2040_M0_0")
board_runner_args(blackmagicprobe "--gdb-serial=/dev/ttyBmpGdb")
include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)
include(${ZEPHYR_BASE}/boards/common/blackmagicprobe.board.cmake)