Stack is aligned by 8 for 64 bit ISA and 4 for 32 bit ISA.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Make variables where we store CPU registers values and
memory addresses bit agnostic.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Mark the places where we intentionally use st instead of STR for
code common for ARCv2 and ARCv3.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Reuse ARCv2 headers [where it is possible] for ARCv3.
In this commit we simply allow to use them for ARCv3, we'll
move it to proper folder and rename them [where it is required]
in the upcoming cleanup patch.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Split ARC sys-io.h implementation for two part:
* AUX reg accessors - ASM based which and valid for ARCv2
* MMIO accessors - writen in C and valid for both ARCv2 and ARCv3
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Extend asm-compat macroses so they can be used with ARC MWDT
toolchain for ARCv2
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add asm-compat macroses to be able to co create assembler code
which works and can be build for both ARCv2 and ARCv3 ISAs
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
On RISC-V 64-bit, GCC complains about undefined reference
to 'ffs' via __builtin_ffs(). So implement a brute force
way to do it. Once the toolchain has __builtin_ffs(),
this can be reverted.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Prepare for Cortex-R MPU support by moving the MPU headers to the
aarch32 common directory. Add compat headers to ease the transition for
the Cortex-M external modules.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
This adds code to swap_helper.S which does special handling of LR when
the interrupt came from secure. The LR value is stored to memory, and
put back into LR when swapping back to the relevant thread.
Also, add special handling of FP state when switching from secure to
non-secure, since we don't know whether the original non-secure thread
(which called a secure service) was using FP registers, so we always
store them, just in case.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
This adds FPU sharing support with a lazy context switching algorithm.
Every thread is allowed to use FPU/SIMD registers. In fact, the compiler
may insert FPU reg accesses in anycontext to optimize even non-FP code
unless the -mgeneral-regs-only compiler flag is used, but Zephyr
currently doesn't support such a build.
It is therefore possible to do FP access in IRS as well with this patch
although IRQs are then disabled to prevent nested IRQs in such cases.
Because the thread object grows in size, some tests have to be adjusted.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add the exception depth count to tpidrro_el0 and make it available
through the arch_exception_depth() accessor.
The IN_EL0 flag is now updated unconditionally even if userspace is
not configured. Doing otherwise made the code rather hairy and
I doubt the overhead is measurable.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Move the STM32F0 specific ram vector table sections into a dedicated
linker snippet included by the new `SRAM_VECTOR_TABLE` symbol.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add a new Kconfig symbol that explicitly controls whether the vector
table should be placed in RAM. This eliminates the side effect of
`IS_BOOTLOADER` controlling vector table location. Making the condition
a positive assertion also allows the config to be used in CMakeLists
conditions (`zephyr_linker_sources_ifdef()`, etc).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Due to the use of gperf to generate hash table for kobjects,
the addresses of these kobjects cannot change during the last
few phases of linking (especially between zephyr_prebuilt.elf
and zephyr.elf). Because of this, the gperf generated data
needs to be placed at the end of memory to avoid pushing symbols
around in memory. This prevents moving these generated blocks
to earlier sections, for example, pinned data section needed
for demand paging. So create placeholders for use in
intermediate linking to reserve space for these generated blocks.
Due to uncertainty on the size of these blocks, more space is
being reserved which could result in wasted space. Though, this
retains the use of hash table for faster lookup.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The ARM64 port is currently using SP_EL0 for everything: kernel threads,
user threads and exceptions. In addition when taking an exception the
exception code is still using the thread SP without relying on any
interrupt stack.
If from one hand this makes the context switch really quick because the
thread context is already on the thread stack so we have only to save
one register (SP) for the whole context, on the other hand the major
limitation introduced by this choice is that if for some reason the
thread SP is corrupted or pointing to some unaccessible location (for
example in case of stack overflow), the exception code is unable to
recover or even deal with it.
The usual way of dealing with this kind of problems is to use a
dedicated interrupt stack on SP_EL1 when servicing the exceptions. The
real drawback of this is that, in case of context switch, all the
context must be copied from the shared interrupt stack into a
thread-specific stack or structure, so it is really slow.
We use here an hybrid approach, sacrificing a bit of stack space for a
quicker context switch. While nothing really changes for kernel threads,
for user threads we now use the privileged stack (already present to
service syscalls) as interrupt stack.
When an exception arrives the code now switches to use SP_EL1 that for
user threads is always pointing inside the privileged portion of the
stack of the current running thread. This achieves two things: (1)
isolate exceptions and syscall code to use a stack that is isolated,
privileged and not accessible to user threads and (2) the thread SP is
not touched at all during exceptions, so it can be invalid or corrupted
without any direct consequence.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add the ability to define architecture specific structures, notably
the ability to extend struct _cpu with per-CPU arch-specific stuff that
can be accessed with _current_cpu->arch.* similarly to _current->arch.*
for per-thead architecture data.
This is opt-in for architectures that want to benefit from this,
otherwise empty defaults are provided. A placeholder for ARM64 is
included to show the pattern.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
We can find caller of z_arm64_mmu_init is on primary
core or not, so no need to check mpidr, just add a
function parameter.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Define the FLASH_CCFG memory region from a devicetree partition instead
of from math in the linker file. Removing the special math case results
in the FLASH_CCFG region overlapping the FLASH region, but the linker
accepts this until the FLASH region actually starts placing variables
in the FLASH_CCFG region.
As a result, applications that don't fit in (FLASH_SIZE - 88) bytes will
still fail to link, just with an overlapping memory region error instead
of an overflow error.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move the definition of the two IPC RAM blocks from `#define`'s in family
linker scripts to proper devicetree nodes. Use the devicetree nodes to
generate the memory regions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Simplify the linker script by using the helper macros introduced in
<linker/devicetree_regions.h>. The conditional checks on the Kconfig
symbols are discarded as their default values are typically set via
the status="okay" property of the nodes, and hence the behaviour doesn't
change.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Let's fully exploit tpidrro_el0 by storing in it the current CPU's
struct _cpu instance alongside the userspace mode flag bit. This
greatly simplifies the code needed to get at the cpu structure, and
this paves the way to much simpler multi cluster support, as there
is no longer the need to decode MPIDR all the time.
The same code is used in the !SMP case as there are benefits there too
such as avoiding the literal pool, and it looks cleaner.
The tpidrro_el0 value is no longer stored in the exception stack frame.
Instead, we simply restore the user mode flag based on the SPSR value.
This way, more flag bits could be used independently in the future.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
When MPU is enabled, the sections need to be 64 bytes aligned.
In the case of MMU, BSS section will be 4k aligned, because the first
variable in BSS section 'base_xlat_table' is explicitly aligned by
'__aligned(NUM_BASE_LEVEL_ENTRIES * sizeof(uint64_t))'.
However, with MPU, we do not have such a variable. So it's necessary
to fix the alignment of the BSS section in the linker.ld
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
According to Armv8-R64 Spec, MPU related meta data(region base/limit)
is 64 bits. So we need to re-define MPU related data structure here.
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
If default config ARM_MMU is set to n, samples/tests will have
compilation error. This is because the arch/arm/aarch64/arm_mmu.h
is always included.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The structure for the arm64_cpu_init array has to carry the cache
alignment on the whole structure and not on some internal padding
to achieve the desired effect.
And align struct __esf to a 16-byte boundary which will also align
its size accordingly. This structure is allocated on the stack on
exception entry and the ABI prescribed 16-byte stack alignment
should be preserved.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Flag was present only when ZLI was enabled. That resulted in additional
ifdefs needed whenever code supports ZLI and non-ZLI mode.
Removed ifdefs, added build assert to irq connections to fail at
compile time if IRQ_ZERO_LATENCY is set but ZLI is disabled. Additional
clean up made which resulted from removing the ifdef.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This functions is being called across the tree, no reason why it should
not be a public API.
The current usage violates a few MISRA rules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Split ARM and ARM64 architectures.
Details:
- CONFIG_ARM64 is decoupled from CONFIG_ARM (not a subset anymore)
- Arch and include AArch64 files are in a dedicated directory
(arch/arm64 and include/arch/arm64)
- AArch64 boards and SoC are moved to soc/arm64 and boards/arm64
- AArch64-specific DTS files are moved to dts/arm64
- The A72 support for the bcm_vk/viper board is moved in the
boards/bcm_vk/viper directory
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
In acda9bf9ce new macros were introduced to support a virtual memory
map. Adjust these macros also for AArch64. This also fixes a problem
when building Zephyr when CONFIG_KERNEL_VM_BASE is not the same as
CONFIG_SRAM_BASE_ADDRESS
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The fatal log now contains
- Trap type in human readable representation
- Integer registers visible to the program when trap was taken
- Special register values such as PC and PSR
- Backtrace with PC and SP
If CONFIG_EXTRA_EXCEPTION_INFO is enabled, then all the above is
logged. If not, only the special registers are logged.
The format is inspired by the GRMON debug monitor and TSIM simulator.
A quick guide on how to use the values is in fatal.c.
It now looks like this:
E: tt = 0x02, illegal_instruction
E:
E: INS LOCALS OUTS GLOBALS
E: 0: 00000000 f3900fc0 40007c50 00000000
E: 1: 00000000 40004bf0 40008d30 40008c00
E: 2: 00000000 40004bf4 40008000 00000003
E: 3: 40009158 00000000 40009000 00000002
E: 4: 40008fa8 40003c00 40008fa8 00000008
E: 5: 40009000 f3400fc0 00000000 00000080
E: 6: 4000a1f8 40000050 4000a190 00000000
E: 7: 40002308 00000000 40001fb8 000000c1
E:
E: psr: f30000c7 wim: 00000008 tbr: 40000020 y: 00000000
E: pc: 4000a1f4 npc: 4000a1f8
E:
E: pc sp
E: #0 4000a1f4 4000a190
E: #1 40002308 4000a1f8
E: #2 40003b24 4000a258
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Introduce a new software trap 15 which is generated by the
ARCH_EXCEPT() function macro.
The handler for this software trap calls z_sparc_fatal_error() and
finally z_fatal_error() with "reason" and ESF as arguments.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
This patch introduce new API to enable FPU of thread. This is pair of
existed k_float_disable() API. And also add empty arch_float_enable()
into each architectures that have arch_float_disable(). The arc and
riscv already implemented arch_float_enable() so I do not touch
these implementations.
Motivation: Current Zephyr implementation does not allow to use FPU
on main and other system threads like as work queue. Users need to
create an other thread with K_FP_REGS for floating point programs.
Users can use FPU more easily if they can enable FPU on running
threads.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
We are setting CONFIG_GEN_PRIV_STACKS when AArch64 actually uses a
statically allocated privileged stack.
This error was not captured by the tests because we only verify whether
a read/write to a privileged stack is failing, but it can fail for a lot
of reasons including when the pointer to the privileged stack is not
initialized at all, like in this case.
With this patch we deselect CONFIG_GEN_PRIV_STACKS and we fix the
mem_protect/userspace test to correctly probe the privileged stack.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
* Rename CPU_ARCV2 to ISA_ARCV2. That helps to avoid conflict between
CPU families naming and ISAs naming and aligns this options
with other ARC OSS projects.
* Generalize ARCV2 check to ARC check where it is required.
NOTE: we add ISA_ARCV2 option in a choice list as a preparation
for ISA_ARCV3 addition.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Add initial support for the Cortex-M55 Core which is an implementation
of the Armv8.1-M mainline architecture and includes support for the
M‑profile Vector Extension (MVE).
The support is based on the Cortex-M33 support that already exists in
Zephyr.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since linker_final_pass.cmd is the actual linker script being
used to link the final Zephyr binary, rename it to linker.cmd.
This also renames LINKER_PASS2 to LINKER_ZEPHYR_FINAL simply
to clarify what it is used for, instead of ambiguous pass #n.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
STATUS32.DZ(bit 13) is the EV_DivZero exception enable bit, and it's
not enabled by default. we need to set it explicitly to enable divide
zero exception on early boot and each thread's setup.
The DZ bit is ignored on write and read as zero when there is no
hardware division configured. So we can simply set DZ bit even if
there is no hardware division configured.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
This is another API that is being used in all timer drivers and is not
internal to the clock subsystem. Remove the leading z_ and make promote
it to a cross-subsystem API.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
