Simple naming change, since MULTIBOOT is clear enough by itself and
"namespacing" it to X86 is unnecessary and/or inappropriate.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Implement a simple ACPI parser with enough functionality to
enumerate CPU cores and determine their local APIC IDs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Mostly build tests now, will be extended to verify CTF output once we
have this feature in sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a way to specify a custom SPI configuration file to be
used with the image generation tool. For example, this can be
used to reduce the SPI image size to allow faster flashing
(e.g. 512KB instead of 16MB).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Configure interrupt gpio information (irq-gpios) into the
x-nucleo-iks01a3 shield overlay file.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This commit introduces separate "compatible" strings for DTS nodes
representing different types of Nordic SPI peripherals. Previously
"nordic,nrf-spi" was used for both SPI and SPIM. SPIS was already
handled separately.
Quite a few files need to be touched by this commit but the changes can
be divided into groups of related or very similar ones, distinguishable
by the initial part of the path to the modified file:
* dts/bindings/spi/
new binding for "nordic,nrf-spim" is added and common fields for all
3 types of Nordic SPI peripherals are extracted to a shared file
* dts/arm/nordic/
"compatible" properties in spiX nodes are updated (when there is no
choice as only one type of SPI peripheral is available) or replaced
with a comment pointing out that the proper type of peripheral needs
to be picked at some upper layer
* drivers/spi/
spi_nrfx_spim driver is updated with the new form of macros generated
from dts
* boards/
all spiX nodes in dts files for boards equipped with an nRF chip are
updated with the proper "compatible" property, according to the type
of SPI peripheral that is currently selected for the board by the
corresponding Kconfig choice option (SPI_x_NRF_SPI*)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit introduces separate "compatible" strings for dts nodes
representing different types of Nordic TWI peripherals. Previously
"nordic,nrf-i2c" was used for both TWI and TWIM, and TWIS was not
supported.
Quite a few files need to be touched by this commit but the changes can
be divided into groups of related or very similar ones, distinguishable
by the initial part of the path to the modified file:
* dts/bindings/i2c/
new bindings for "nordic,nrf-twim" and "nordic,nrf-twis" are added
and the one for "nordic,nrf-i2s" is renamed to "nordic,nrf-twi",
common fields for all these bindings are extracted to a shared file
* dts/arm/nordic/
"compatible" properties in i2cX nodes are updated (when there is no
choice as only one type of TWI peripheral is available) or replaced
with a comment pointing out that the proper type of peripheral needs
to be picked at some upper layer
* drivers/i2c/
both flavors of i2c_nrfx drivers are updated with the new names of
macros generated from dts
* boards/
all i2cX nodes in dts files for boards equipped with an nRF chip are
updated with the proper "compatible" property, according to the type
of TWI peripheral that is currently selected for the board by the
corresponding Kconfig choice option (I2C_x_NRF_TWI*)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Enable CMSDK GPIO driver on v2m_musca_b1 SoC/Board. Add LEDs that are
on the board and init the pinmux for those LEDs to work.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Utilize CONFIG_TRUSTED_EXECUTION_NONSECURE to decide if we do pinmux.
This Kconfig option is more useful since we only set the _SECURE
version isn't set if we are ignoring the security mode feature.
Move the LED pinmux setup into the not NONSECURE case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds support for NXP's Freedom K22 board.
Co-authored-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Co-authored-by: Tom Burdick <thomas.burdick@gmail.com>
Signed-off-by: Tom Burdick <thomas.burdick@gmail.com>
Header files of nrfx HALs are not supposed to be included directly
but only with their names prepended with the hal/ directory (so that
an inclusion of an nrfx HAL header clearly differs from an inclusion
of an nrfx driver header).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The QEMU x86 .dts files were re-arranged before long mode was
merged. We don't need this reference to the flash region anymore.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Removed mec15xxevb_assy6853.jpg as its not used and vastly reduced
the image size as the files were extremely large.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enable LiteX DNA ID driver in litex_vexriscv board.
Signed-off-by: Jakub Wegnerowski <jwegnerowski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Map eSPI UART traffic to UART1 on MEC1501 modular board.
Remove unnecessary dts fields
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Enable CMSDK GPIO driver on v2m_musca SoC/Board. Add LEDs that are on
the board and init the pinmux for those LEDs to work.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds an extra step at the end of build to generate a flashable
image using Microchip tool available at:
https://github.com/MicrochipTech/CPGZephyrDocs
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This enables the PWM blocks in DTS. Only PWM0 has been enabled
and tested due to board/jumper configurations.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Each and every instance has a specific pin.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add RTC timer driver for CC13X2/CC26X2, and use it instead of systick
as system clock. It is necessary to use this timer for power
management support, so that the system can exit from deep sleep upon
expiry of timeouts.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The SensorTile.box is a board designed for IoT applications
embedding a wide range of intelligent low power MEMS sensors,
a STM32L4 microcontroller to manage sensor configuration and
process sensor output data, a micro-USB battery charging
interface and an ST Bluetooth Low Energy module for wireless
communication with a BLE-enabled smartphone.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
For long lists of items, it's better to use a multi-column display to
make better use of the screen space. We used the hlist directive to
accomplish list, but it has a drawback on small (phone) screens because
under the hood, the rendering is done using tables.
Instead, we can take advantage of built-in CSS multi-column support
available in recent browsers. So, convert uses of the hlist directive
to use an rst-class directive to apply a multi-column class to
the entity. The chosen column-width (18em) gives us a 3-column display
on typical window sizes, but will adjust to more or fewer columns
depending on the actual real estate available.
Also, update the documentation guidelines to mention this change.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
