In order to have Espressif SoCs working with
the same uart drivers, all low level functions
are now replaced to hal_espressif HAL calls.
This also changes pinmux, gpio and uart
init order to meet its dependencies.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Added watchdog implementation which is using counter device
to implement watchdog driver API. Watchdog timeout is called from
counter interrupt context. Some counter implementations support
using ZLI interrupt level which can be use here as well. Watchdog
like this can be used along hardware watchdog to cover for its
limitations, i.e. Nordic watchdog resets unconditionally after
62uS after triggering watchdog interrupt. It is not enough time
to dump logging data.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit adds minimal support of Xen hypervisor console via UART-like
driver. Implementation allows to use poll_in/poll_out char interface for
uart_console.c driver directly to HV console instead of using Xen
virtual PL011 UART. Future implementation will support interrupt driven
interface on Xen event channels, currently it is under development.
Also this commit introduces early console_io Xen interface, which allows
to receive printk/stdout messages quickly after start, but requires Xen,
built with CONFIG_DEBUG option.
Signed-off-by: Dmytro Firsov <dmytro_firsov@epam.com>
Add SoC-specific code, the basic device tree and Kconfig data as well
as the corresponding linker command file for the Xilinx Zynq-7000
family of SoCs. This SoC - either as a QEMU simulation or on actual
hardware such as the Avnet/Digilent ZedBoard - is suitable as an ini-
tial target for the ARMv7 Cortex-A support.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
Include the CANopenNode module integration files in the CAN bus
maintainers group and assign ownership to me.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
One limitation of the current IPM API is that it is assuming that the
hardware is only exporting one single channel through which the data can
be sent or signalling can happen.
If the hardware supports multiple channels, the IPM device must be
instantiated (possibly in the DT) several times, one for each channel to
be able to send data through multiple channels using the same hw
peripheral. Also in the current IPM API only one callback can be
registered, that means that only one driver is controlling all the
signalling happening on all the channels.
This patch is introducing a new MBOX API that is supporting
multi-channel signalling and data exachange leveraging and extending the
previous (and outdated) IPM API.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This is a driver for the Synopsys DesignWare MAC. It should work
with the "DesignWare Cores Ethernet Quality-of-Service" versions 4.x
and 5.x.
This driver uses a zero-copy strategy, meaning that the hardware
reads and writes data directly from/to packet fragment buffers
provided by the network subsystem without first copying the data into
a dedicated DMA bounce buffer.
Platform specific setup is necessary for the hardware to work.
Currently, only the STM32H7X series is implemented and tested.
While this part needs refinement, this driver performs better and uses
far less code space than the HAL-based alternative.
Not yet implemented:
- MDIO (it is WIP, currently relying on default PHY config)
- PTP support
- VLAN support
- various hardware offloads (when available)
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Take ownership of all the neorv32 specific files (dts bindings, soc
implementation, drivers, and board definition).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This is used by autoPTS project so make sure Szymon is aware of all
changes in tester application.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Import any manifest files in a new 'submanifests' directory into
west.yml.
This lets users define custom zephyr modules or easily override
built-in modules by dropping their own manifest files into
submanifests/some-user-file.yaml.
Provide an example and a README with links to the relevant
documentation in 'submanifests' to get users started.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add an application agnostic State Machine Framework library to
Zephyr that provides an easy way for developers to integrate
state machines into their application.
Twister passed:
twister -T tests/lib/smf/
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
1. Add support for multiple syscon entries (as a side effect, this also
fixed syscon.c implementations which weren't being linked to their
syscon.h counterparts).
2. Add support for different width registers in syscon.
3. Add tests for syscon
Signed-off-by: Yuval Peress <peress@chromium.org>
This adds driver for EOS_S3 SoC FPGA.
Signed-off-by: Mateusz Sierszulski <msierszulski@internships.antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Add a shim that allows using the nrfx PDM driver via the Zephyr API.
Add also missing devicetree nodes representing the PDM peripherals
in the nRF52 Series SoCs.
Extend the "nordic,nrf-pdm" binding with a new property that allows
specifying the clock source to be used by the PDM peripheral (so that
it is possible to use HFXO for better accuracy of the peripheral clock
or, in the nRF53 Series SoCs, to use the dedicated audio oscillator).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This script allows us to programmatically query bug-bashers within
a user-supplied time-window.
For example, we held a "Bug Bash Week" August 1-7, 2021 (it was
announced a week early though). The output of the script prints
the "top ten" bug bashers in tab-separated columns in descending
order. The first column is the number of bugs squashed and the
second column is the github user id.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Add myself and Teng-Shih-Wei as owners for andes_v5 soc series, dts,
adp_xc7k_ae350 board, and device drivers from Andes.
Signed-off-by: Jim Shu <cwshu@andestech.com>
to make use of Espressif's hal in order to ease both
driver maintenance and code reuse between socs.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
This commit adds support for Ethernet PHY drivers via a PHY API.
It also includes a driver for a generic MII compliant PHY
which supports most PHYs on the market.
Separating PHY driver from the SoC specific Ethernet driver
simplifies the Ethernet driver code and enables code re-use.
Drivers for specific PHYs with more advanced features, such as
RGMII delay in PHY can be developed independent of the Ethernet
MAC driver.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
This commit adds support for the Legend 2.5" boards (legend25_ssd and
legend25_hdd) based on the STM32F070CB MCU. These boards can be found in
the Seagate FireCuda Gaming Drive, Gaming Drive for Xbox, SSD Gaming
Drive for Xbox, and Gaming Drive for PlayStation devices. Both boards
contain the following hardware components:
- A B1414 LED strip connected to the PA7 pin (SPI MOSI)
- A SPI flash (FM25F005) connected on SPI2 bus
The Legend 2.5" HDD board also contains an activity LED connected on
TIM3 CH3
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
based on uart rom functions, also enable console driver
on top of this driver, which enables logging
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
We try to reduce the ambiguity between 'soc/nuvoton/' and
'soc/nuvoton_npcx' folders. Most if soc vendors name their soc folder by
the company name with SOC_FAMILY suffix instead of the company name
directly. It is clearer if the soc company has different product lines
that aim to specific markets.
In this CL, the 'numicro' suffix is used for Nuvoton Microcontroller
production line. It distinguishes the 'npcx' suffix that used for
Nuvoton Embedded Controller (EC) of Notebook PC product line.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
The driver only support use case where the channels are used in mutual
exclusion.
Origin: Original
Signed-off-by: Guillaume Lager <g.lager@innoseis.com>
based on uart rom functions, also enable console driver
on top if this driver enabling logging
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
Add a shim that allows using the nrfx I2S driver via the Zephyr API.
Add also missing devicetree nodes representing the I2S peripherals
in the nRF52 Series SoCs.
Extend the "nordic,nrf-i2s" binding with a new property that allows
specifying the clock source to be used by the I2S peripheral (so that
it is possible to use HFXO for better accurracy of the peripheral clock
or, in the nRF53 Series SoCs, to use the dedicated audio oscillator).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
All the macro for dma-cells are now in the
include/drivers/dma/dma_stm32.h header file.
So the include/dt-bindings/dma/stm32_dma.h is no more
useful and removed from #include.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
