add missing break statement so that CLOCK_CONTROL_AMBIQ_TYPE_LFXTAL case
is handled correctly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
we iterate over all the channels, and if more than one channel is
active at a time. interrupt on any one of active channel was
triggering callback for other active channel, because flags value
is 1 (enabled). this is commit handle this behaviour and only
trigger callback if bits other than status is set
Signed-off-by: Anuj Pathak <anuj@croxel.com>
This patch adds a missing include directive to `spi.dtsi` in the
`build_all` configuration.The include is required because commit
2ac316465f introduced the use of `GPIO_ACTIVE_HIGH` and `GPIO_ACTIVE_LOW`
macros.
Signed-off-by: Patryk Koscik <pkoscik@antmicro.com>
Add argument to the TLS credential `cred buf` command that enables
a shell bypass to write the TLS credential directly to the credential
buffer.
This is useful for writing load credentials that cannot fit in a single
`cred buf` command and would otherwise have to be split into multiple
cred buf commands.
Sending multiple in succession like that from a script for example very
easily causes the shell RX buffer to get full, resulting in multiple
`RX ring buffer full.` warnings.
This is very difficult for a script to handle.
Using a bypass has much better performance and can easily avoid the
RX ring buffer full condition without increasing the RX ring buffer
to much.
It is also easier for a script to use.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Due to the lack of the overlays for lots of platforms, bring up the
platform_allow again before the sample ifdef are refined
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Adds a common vendor dts file specifying the default partition
layout for nRF54L05-based cpuapp board targets and updates boards
to use this common file. This also drops the secure/non-secure split
in the partitioning as this was reducing NVM storage that is not
used by this board target and fixes the wrong flash field in
twister yaml files
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a common vendor dts file specifying the default partition
layout for nRF54L15-based cpuapp_ns board targets and updates boards
to use this common file.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a common vendor dts file specifying the default partition
layout for nRF54L15-based cpuapp board targets and updates boards
to use this common file. This also drops the secure/non-secure split
in the partitioning as this was reducing NVM storage that is not
used by this board target and fixes the wrong flash field in
twister yaml files
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a workaround for partitions on nrf54l10 non-secure devices to
prevent build issues, this needs to be fixed properly when a TF-M
update is done which sets the partition sizes properly
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a common vendor dts file specifying the default partition
layout for nRF54L10-based cpuapp board targets and updates boards
to use this common file. This also drops the secure/non-secure split
in the partitioning as this was reducing NVM storage that is not
used by this board target and fixes the wrong flash field in
twister yaml files
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
When running the tests/drivers/memc/ram on the
adi_eval_adin1110ebz target, do not involve sram1, sram2
That will avoid warning about orphan section for
`DT_N_S_memory_10000000_P_zephyr_memory_region_STRING_TOKEN
and DT_N_S_memory_20040000_P_zephyr_memory_region_STRING_TOKEN
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Update CONFIG_SPI_IDEAL_TRANSFER_DURATION_SCALING
value for testcase to pass for higher transfer speeds.
Signed-off-by: Sai Santhosh Malae <Santhosh.Malae@silabs.com>
jlink runner works fine for the Pico2, just like Pico1 (rpi_pico).
Copied relevant lines from rpi_pico/board.cmake.
Fixed typo in documentation.
Signed-off-by: Koen Van Herck <koen.v.herck@gmail.com>
Make the GNSS emul driver less capable w.r.t fix interval so that we can
exercise more error paths if e.g. user requests a fix interval of 100ms.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
arch_elf_relocate_global() and arch_elf_relocate_local() aren't LLEXT
API functions, they're internal implementation functions, move them
to llext_internal.h
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
With experience it becomes clear, that failing to resolve symbols
during the linking process is likely fatal for the module loading and
a simple warning isn't enough. Fail loading instead.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Functions like `add` and `sub` can only return base 10 integers, which
means they can't really be used to define Kconfig symbols of type `hex`.
For the same reason, there already exist pairs of devicetree functions
named e.g., `dt_node_reg_addr_(int|hex)` after different return types.
Introduce `add_hex`, `sub_hex`, and friends.
To avoid confusion, it should be possible for those new functions to
accept arguments in base 16 as well. It's actually easier to let all
arithmetic functions take their inputs in "any" base, by leveraging
Python's built-in: `int(..., base=0)`.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
The hci_ipc sample does not support fragmentation of IPC-messages.
Give an ASSERT if only parts of an IPC-message is delivered.
This would happen for instance when the underlying transport mechanism
cannot hold the complete message.
Background:
The open-amp backend uses RPMSG_BUFFER_SIZE=512
Most applications and controllers use HCI-packets which are at most
255 bytes. In some cases a controller may deliver HCI-packets beyond
255 bytes.
This may for instance be the case if the controller delivers large ISO
SDUs as a single HCI-packet.
Signed-off-by: Johan Stridkvist <johan.stridkvist@nordicsemi.no>
The "net conn" command printed AF_PACKET socket as AF_UNK(3).
Fix this by printing "AF_PACKET" in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure that uninitialized state is 0 so that we can catch
when the context is not initialized properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure we cleanup only those DNS servers that belong to
certain network interface when the interface goes down.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Bind the network interface to the network interface we
have received the DNS servers from. This is now the default.
The previous behavior can be restored by disabling the
CONFIG_NET_DHCPV6_DNS_SERVER_VIA_INTERFACE option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Bind the network interface to the network interface we
have received the DNS servers from. This is now the default.
The previous behavior can be restored by disabling the
CONFIG_NET_DHCPV4_DNS_SERVER_VIA_INTERFACE option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to specify which network interfaces to bind the
server to when reconfiguring the DNS system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
