Flash memory uncorrectable ECC error can either generate NMI
or reset. When reset is triggered, add entry to handle flash
ECC errors in hwinfo.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
SoC with support to enter and exit into bootstrap loader or
bootloader mode for programming and verifying the flash memory
will have reset cause as bootloader.
Add entry to accommodate entry and exit from bootloader mode.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
The build system currently generates mapfiles by invoking ld with the
"-Map=<mapfile>" command line argument. This variant of the flag was
introduced in GNU binutils 2.20.
To enable compatibility with legacy versions of the GNU ld, the argument
has been replaced with the "-Map <mapfile>" variant.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
The EDAC shell code previously contained a number of references to the
Intel IBECC driver. Make the shell code more generic to the defined EDAC
API, and make IBECC-specific code dependent on its config option.
Also make NMI control dependent on X86 as it is specific to that
platform.
Rather than looking for a node labeled "ibecc", the EDAC shell code
now simply requires that a chosen entry for "zephyr,edac" be present to
point to the desired device. The Intel Elkhart Lake DTS has been updated
to add this alias.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Add an EDAC driver for the Synopsys DDR memory controller, used in the
Xilinx MPSoC (ZynqMP) devices, to allow monitoring for ECC errors.
Note that currently only the compatible string used for the ZynqMP
(shared with Linux) is currently supported. Support for other Synopsys
core implementations can be added in the future.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
When reconfiguring the SSP, some changes do not immediately take effect
in particular changes to the clock polarity are not applied. Disabling
and re-enabling the SSP forces the new configuration to take effect
immediately.
Signed-off-by: George Norton <george_norton_uk@hotmail.com>
The existing logic caused a regeneration when any of the .conf files
changed, but modifying the Kconfig files can also cause the .config file
to become out of date e.g. by adding a new config option or by changing
the default value of a config option (when that default is not
overridden by a .conf).
Without this change, an incremental build wouldn't pick up the new value
and would require the user to notice that and manually do a clean build.
Signed-off-by: Richard Hughes <rhughes@xilinx.com>
Add "net dns service <dns-service-name>" which can resolve
service names like "_http._tcp.dns-sd.org" described in DNS-SD
RFC 6763.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the default max. answer length of 512 bytes is not enough,
user can specify it by setting CONFIG_DNS_RESOLVER_MAX_ANSWER_SIZE
to suitable value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Corrected the timeout condition in the ti_adc_sequencer_start function
to ensure proper timeout handling during ADC sequencer operations.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Ensure proper release of memory slab when dmm_buffer_in_release fails in
the event_handler function.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Set regulatory domain to default US for IW610 and RW610 socs
and WW for IW416 and IW612 socs.
Signed-off-by: Abhinav Kulkarni <abhinav.kulkarni@nxp.com>
Added kconfig for regulatory domain in hostapd. Default is set to
00 as World Wide mode.
Also added 3rd octet kconfig to set regulatory environment and set
it to 32 for all supported environments.
Signed-off-by: Abhinav Kulkarni <abhinav.kulkarni@nxp.com>
To circumvent peculiarities in the linker, the _init blocks
(as well as their content) needs to be tagged with keep.
Signed-off-by: Björn Bergman <bjorn.bergman@iar.com>
The `zephyr_code_relocate` now supports the NOINIT memory type in addition
to DATA, TEXT and BSS. This patch documents its usage.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
The code relocation feature allows code and data section to be located
inside a designated RAM region.
Currently, this feature supports relocation of code (text) and data
including mutable data (data), read-only data (rodata), and
zero-initialized data (bss).
However, relocation of non-initialized data sections was not previously
supported, meaning that any data annotated with the __noinit attribute
could not be relocated into the desired RAM region.
This patch adds a NOINIT memory-type which can be used implicitly or
explictly in the zephyr_code_relocate() CMake function. This causes the
build system to generate additional linker-script section-matching rules.
By the nature of noinit data, no action is required by Zephyr at boot.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
This patch improves the formatting of the "Additional Configurations"
section of the "Code And Data Relocation" document.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
Modify the reset function to also reset the connection and
PA sync states.
Modify and add missing checks for mutex locks to use ASSERT
when using K_FOREVER, as they should never fail/timeout.
Cleanup some text and error checks.
Ensure that the add_src_param is reset for each loop
iteration as well.
Modify so that we use K_FOREVER fewer places.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
IUT works as an RFCOMM Client. The peer device, RFCOMM server, is a PC
running bumble.
In the test suite, there are five test cases:
Case 1, RFCOMM Client with Command Responses. Tests that the client can
establish a DLC, respond to various commands (RLS, RPN, Test), send NSC
responses, and properly handle DLC disconnection and RFCOMM session
shutdown.
Case 2, RFCOMM Client with Credit Based Flow Control. Tests that the
client can establish a DLC, perform information transfer with credit
based flow control, initiate disconnection, and shutdown the RFCOMM
session.
Case 3, RFCOMM Client with BR Connection Disconnection. Tests that the
client correctly handles scenarios where the BR connection is
disconnected during DLC establishment.
Case 4, RFCOMM Client with Aggregate Flow Control. Tests that the client
can establish a DLC, perform information transfer with aggregate flow
control, and properly handle disconnection and session shutdown.
Case 5, RFCOMM Client with Failed PN Response. Tests that the client
correctly handles scenarios where it fails to receive a PN response when
establishing a DLC.
Signed-off-by: Jiawei Yang <jiawei.yang_1@nxp.com>
Bluetooth 6.1 has version number 0x0F and was released in May 2025.
This commit ensures this version number is properly decoded.
Going forward we may consider removing printing the version
number as a string because the feature set is more important
than the version number.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
For a long time (since version 3.3.0) nrfx contained an incorrectly
defined symbol NRF_SAADC_8BIT_SAMPLE_WIDTH that was set to 8 for nRF54L
and nRF54H Series SoCs, which was probably only true for very early
engineering revisions of those. Based on this, the adc_nrfx_saadc driver
was incorrectly writing consecutive 8-bit samples in supplied buffers,
cutting off the highest 8 bits of the results. And for sequences with
multiple channels, it was even causing that the results written as
16-bit words by hardware were partially overwritten in next iteration.
In nrfx 3.12.0 (see commit f46798fa55)
this was finally corrected - the symbol is now deprecated and it is
always set to 16. This commit is a follow-up to the above and removes
parts of adc_nrfx_saadc that now became dead code to prevent further
confusion regarding 8-bit sampling.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove parts of overlays for nRF targets that were just copied from
the adc_dt sample but are not used by the adc_sequence sample and only
generate confusion here.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Extend I2S testing with additional test cases that verify
I2S/TDM driver operation at various configurations.
Check:
- word sizes of 8, 16, 24, 32 and 48 bits;
- one, two, four and eight audio channels configuration;
- data format I2S, Left Justified, Right Justified,
PCM Long, PCM Short;
- data order MSB and LSB first;
- bit clock and frame clock inversion;
- block size of 6 bytes;
- bit clock continuous and gated;
- internal loopback;
- pingpong option.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
When set 'wifi reg_domain' CMD, need to create and download countryinfo
to sync driver and FW for embedded supplicant case
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Add information how the net_mgmt request handler is changed.
The event number type is changed from uint32_t to uint64_t to allow
the event command to be a bit mask instead of enum value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We cannot use the network management event number directly as
a socket option value because the management value is uint64_t
and that cannot be mapped directly to 32 bit integer.
So have an intermediate socket option that is mapped to actual
network management request number in getsockopt() and setsockopt().
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of using 32 bit enum values for event numbers, convert
the code to use 64 bit long bit fields. This means that the
user API is changed to use 64 bit event values instead of 32
bit event values.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Update the input_thread function signature to match the expected
k_thread_entry_t type:
typedef void (*k_thread_entry_t)(void *p1, void *p2, void *p3);
Signed-off-by: Tim Pambor <tim.pambor@codewrights.de>
