Transactions should result in a single transfer call not multiple
transfer calls. Transceive isn't supported by i2c and so the TXRX op
isn't validated for success anymore.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Some devices may belong to >1 power domain, so with the current design
this is something not possible to describe. It's worth to note that
Linux also uses the `power-domains` naming scheme, not `power-domain`.
This patch also introduces `power-domain-names` so that each entry in
`power-domains` can be given a name if needed. `#power-domain-cells`
is now required as well.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Consistently use the nRF54L15 as the non-TF-M integration platform
in addition to `native_sim`, and the nRF9151 as the TF-M one.
In addition, add the `integration_platforms` specification to the
tests that were missing it.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Use EXTRA_CONF_FILE in sample yaml files,
that replaced deprecated OVERLAY_CONFIG
since the Zephyr v3.4 release.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Insert Feature Units in between:
* USB Streaming Input Terminal and Headphones Output Terminal
* Microphone Input Terminal and USB Streaming Output Terminal
The Feature Units have Mute control only on the Primary channel 0.
The headphones Feature Unit also has Automatic Gain control on all
channels while microphone Feature Unit has Automatic Gain control only
on the Logichal channel 1.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The `m2gl025_miv` is breaking the ci during the zbus integration tests. To
solve that in a meanwhile, this commit excludes the board from the
zbus integration tests.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Added tests for bindesc reading, to test reading on multiple C/C++
standards. Only RAM and flash backends are tested, as the flash
simulator can't simulate a memory mapped flash.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Add an example implementation of `get_fattime` to the API tests. Also
ensure that `FS_FATFS_EXTRA_NATIVE_API` compiles in a test.
Signed-off-by: Jordan Yates <jordan@embeint.com>
All Intel Audio DSP platforms have non-coherent cache between
CPUs. So the zbus_channel struct data goes out-of-sync between
CPUs with multiple producer and consumer threads running
concurrently on multiple CPUs, resulting in bad pointer being
used, e.g. passed to memcpy(). So exclude these platforms from
running in twister as they are certain to fail.
Fixes: #79368
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The function jwt_payload_len doesn't return payload length but returns
used data in builder->buf
If jwt_payload_len is called after jwt_init_builder, header length will
be returned
If jwt_payload_len is called after jwt_add_payload, header+payload
length will be returned
If jwt_payload_len is called after jwt_sign, header+payload+sign length
will be returned
So, this commit removes the function and uses strlen instead
Signed-off-by: Benjamin Lemouzy <blemouzy@centralp.fr>
- Some files (PEM/DER files, jwt-test-cert.c, user-tls-conf.h)
were removed because they are not used or no longer necessary.
Private keys used in the test are now in the jwt-test-private.c
file as arrays.
- testcase.yaml has been improved in order to test all possible
use cases: ECDSA with TC, ECDSA with PSA, RSA;
- unnecessary Kconfigs were removed from prj.conf.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
There is a check to see if it is no longer able to push more
messages into a full queue. When these is another CPU consuming
messages, the queue would not be full at that point. A new message
can be pushed into the queue and thus failing the "full queue"
check. So limit this to 1 CPU only so this check's assumption
can be fulfilled.
Fixes#79319
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The Modbus protocol object types are either single-bit or 16-bit word.
Other types are not defined in the specification. Types such as float
are typically mapped to two 16-bit registers. Current implementaiton
does not maps correctly to the 16-bit word addresses. On the client
side, the implementation must take into account that the number of
requested registers (Quantity of Registers) is double that of a "float"
register. The server side should not treat "Quantity of Registers" and
"Byte count" differently for addresses reserved for floating values,
only in the user callback the two 16-bit registers are mapped to a float
value but still aligned to 16-bit register addresses.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
When building an LLEXT-enabled kernel, 62b19ef65c added weak aliases
of all syscall implementation functions to a pointer to NULL, with the
assumption that LLEXT would check the required symbols at link time and
fail if any of them were found.
This check, however, is ineffective in the current implementation: the
actual address that is exported is the rather normal-looking location of
the variable containing the NULL pointer. This defeats the NULL symbol
validity checks in llext_link.c and causes the extension to crash at
runtime by jumping to a location containing a few zeroes in read-only
data memory.
This commit makes sure the alias target is actually placed at address 0
using the llext-sections.ld linker fragment, so that undefined syscall
implementations are exported as NULLs and as such properly flagged at
link time.
The test for this functionality is also updated to reflect the change.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
There are many places where source_id is retrieved and it
depends on runtime filtering being enabled. So far it was
all exposed but lets encapsulate that into a helper function.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add one suite to test the PSA ITS API directly, and another to test it
through the PSA Crypto API.
The PSA ITS API test suite is run with different configurations to also
test customization possibilities that the secure storage subsystem offers.
Both test suites also have a test scenario with TF-M instead of the
secure storage subsystem.
This serves as compatibility testing to ensure that the PSA Secure
Storage API behaves the same from the user's point of view regardless
of the underlying implementation provider.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
LLEXT tests currently fail on platforms where a console was chosen but
its underlying device is not enabled. This might happen for example on
multicore SoCs, where the console is only enabled on the most powerful
CPU.
Fix this by only allowing testing the device API if the console device
is both chosen and enabled in the final DT.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This commit introduces architecture-specific ELF relocations for RISC-V,
in accordance with the RISC-V PSABI specification:
https://github.com/riscv-non-isa/riscv-elf-psabi-doc/blob/master/riscv-elf.adoc
Also, the necessary compiler configurations for compiling LLEXT
extensions on RISC-V are added, and the llext tests are executed on
RISC-V targets.
Calling llext extensions from user threads in RISC-V is still
unsupported as of this commit.
Signed-off-by: Eric Ackermann <eric.ackermann@cispa.de>
This is in preparation for adding another SoC where qemu_xtensa
is no longer valid choice. So use qemu_xtensa/dc233c as it is
the same as the old qemu_xtensa.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support in this IPC backends for POSIX arch targets in general,
and ensure the nrf5340bsim defines the buffer which will be used.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Provide a new function for initializing the Rx side,
so users do not need to initialize the pointers by hand
if they did not use PBUF_DEFINE().
Let's also rename pbuf_init() to pbuf_tx_init() to clearly
signify the previous function was only meant to be used
by the Tx side.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Add a new test to the simple llext test suite that verifies that DT
devices are properly exported to extensions. This is done by obtaining a
device handle from the DT and then trying to get the same handle at
runtime using the device_get_binding() API.
This test is optional because the current qemu_xtensa platform does not
have any usable DT devices to test with.
The LLEXT heap size is also increased to 64 kbytes to avoid heap
exhaustion when running the new test on mps2_an385.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
So let's make sure we test in native_sim instead of native_posix..
Also, building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
