The commit removes flash_area_open usage from tests, where it is not tested
and only used to obtain area.
The commit adds tests for flash_area_device_is_ready.
The commit adds test for flash_area_sectors, which is equivalent
of flash_area_get_sectors but takes flash area object instead of flash
area index.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Don't duplicate the test's output running it on `native_sim` after
`LOG_BACKEND_NATIVE_POSIX` was enabled by default (bd9836be8c)
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Some code that automatically gets embedded on some platforms relies
on having `CONFIG_TIMEOUT_64BIT` enabled.
Do not force disabling that Kconfig option in the test configuration,
as that will make the test fail to compile on those platforms.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
`_current` is now functionally equals to `arch_curr_thread()`, remove
its usage in-tree and deprecate it instead of removing it outright,
as it has been with us since forever.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This addresses the following warning building with `CONFIG_64BIT=y`:
error: field precision specifier '.*' expects argument of type 'int',
but argument X has type 'size_t' {aka 'long unsigned int'}
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Change in default flash map generation, where partitions hanging of
disabled devices will not have flash area generated.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This set of changes enables the RS485 hardware connected to usart3 and
provides some overlays that allow for easily running the modbus
rtu_client and rtu_server samples on Opta.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
As long as MBEDTLS_ENTROPY_C is enabled, Mbed TLS needs to
poll some entropy source to gather data that will then be
processed by CTR/HMAC-DRBG modules. This means that in most
of the cases, once MBEDTLS_ENTROPY_C is enabled then also
MBEDTLS_ENTROPY_POLL_ZEPHYR needs to be enabled. This was
done manually until now, as the long list of samples/tests
demonstrate.
This commit solves this dependency by defaulting
MBEDTLS_ENTROPY_POLL_ZEPHYR to on as soon as
MBEDTLS_ENTROPY_C is set. As a consequence, all manual
enablement of MBEDTLS_ENTROPY_POLL_ZEPHYR in samples/tests
are removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The main problem of MBEDTLS_PSA_CRYPTO_LEGACY_RNG is that it
brings in some legacy modules (entropy + ctr_drbg/hmac_drbg)
which means extra ROM/RAM footprint.
MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG instead simply calls to the
CSPRNG which makes it definitely smaller.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add `hifive_unmatched//s7` (earlier selected by default, using
`hifive_unmatched`) and `hifive_unmatched//u74` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add `hifive_unleashed//e51` (earlier selected by default, using
`hifive_unleashed`) and `hifive_unleashed//u54` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Test was marked build only with filters in each scenario looking for
sdl-dc which is only available on native_sim, so cut the chase and use
platform_only to narrow things down to native_sim directly instead of
building the world to get information we already know.
reduces build/run time from 78s to 17s on invocation of twister with
default options, saves a ton more when running twister with --all.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The default policy currently directly references the private
variable next_event from policy_events.c to then convert the cycle
of said event (if exists) to a kernel tick in the future, something
policy_events.c already implements and exposes through
pm_policy_next_event_ticks().
Additionally, the implementation of pm_policy_next_state() in
policy_default.c already gets the nearest kernel tick, wherein
the next event has already been accounted for in, see
implementation of pm_system_suspend().
This commit removes the redundant and layer violating computation
if the tick of the next event from policy_default.c and updates
the test test_pm_policy_events to not use default policy to
determine if pm_policy_next_event_ticks() is correct.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Now that section header cache is persistent, it can be used for
finding sections. Add a new function, similar to llext_find_section()
to use it and deprecate llext_find_section().
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Obviously, everyone knows that there are 8 bits per byte, so
there isn't a lot of magic happening, per se, but it's also
helpful to clearly denote where the magic number 8 is referring
to the number of bits in a byte.
Occasionally, 8 will refer to a field size or offset in a
structure, MMR, or word. Occasionally, the number 8 will refer
to the number of bytes in a 64-bit value (which should probably
be replaced with `sizeof(uint64_t)`).
For converting bits to bytes, or vice-versa, let's use
`BITS_PER_BYTE` for clarity (or other appropriate `BITS_PER_*`
macros).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Adds compiler flag(s) and some architecture-specific relocations
for ARC. No userspace support, doesn't support all relocations.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
The commit moves SHA calculation to separate test scenario, so that
it can be run separately from other flash map tests.
This reduces flash wear by not running basic flash map tests each
time different SHA backend is tested.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Remove needless writes/read and erase in flash_area_get_sectors test
scenario, by replacing it with comparison with layout directly obtained
from device.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
ISH SoCs have zero-address memory mapped to I2C0 controller.
Coredump cannot be triggered by zero-address access.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
The test was not being run on arm64 and riscv because the filter was
incorrect. Properly fix the filter to run the test on all platforms
that have any kind of MMU enabled.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Most of the tests in the LLEXT subsystem test suite run with memory
protection hardware (MPU/MMU) disabled, to avoid including memory domain
issues while testing the core functionality. Only a few tests need to
run with MPU/MMU enabled.
This patch simplifies the testcase.yaml by setting the memory protection
as disabled in a shared config file that is included by most tests.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Restore Apollo boards now that the issue has been fixed.
Also remove extra CONFIG_SOC_SERIES_S32ZE filters, as they are already
covered by the 'platform_exclude' common section.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The fs_loader test is always executed in the main test source when
CONFIG_FILE_SYSTEM is set, and this is in turn enabled by per-board
config overlays. So there is no point in having a separate test case:
it is simply a duplicate of the "readonly" test.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Fix a problem with the test that manifested itself with a surprising
assertion failure at lib/utils/onoff.c:283. Apparently, due to the
stack being too small, some memory got accidentally overwritten.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fixes the zbus publishing statistics test to account for a non-zero boot
delay, which is often used in hardware testing environments. This fixes
an assertion failure observed on multiple max32 boards in the adi board
farm.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Remove CONFIG_MMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the mmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
mmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
As part of TinyCrypt deprecation process (#79566) this commit
removes usage of this library from the JWT subsystem and its
related tests.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Coverage for cmsis rtos APIS should is provided using simulation, we
should not build those on every platform we have. Avoid failures due to
incompatiblities in requirements coming from various boards and also
reduce churn and noise during testing and CI.
Fixes#80215
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The stream flash test has been written with SoC internal
storage in mind and its simplified structure does not take
into account possibility of existence of devices with
different erase characteristics, at run time.
The commit fixes the test failing with Nordic bords that
have CONFIG_SPI_NOR=y set by default, which made test
to behave like device with erase capability has been tested.
The commit sets CONFIG_SPI_NOR=n for nrf54l devices.
Fixes#79181
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This resolves some addressed comments in this PR
https://github.com/zephyrproject-rtos/zephyr/pull/77930
It adds as well a section in the documentation about some
recommendations to increase ZMS performance.
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
The commit splits default FCB scenario into one with endmarker
enabled, the original one, and one with disabled.
This allows to test the FCB in cases when CONFIG_FCB_ALLOW_FIXED_ENDMARKER
is set and not set.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
What is changed?
- Added a new mps3 board an552 for the soc corstone300.
The qualifier to build/run application with board mps3/an552 is
`mps3/corstone300/an552` for secure and
`mps3/corstone300/an552/ns` for non-secure.
- Added FVP variant to enable FVP testing with corstone300
and it uses the ARM FVP `FVP_Corstone_SSE-300_Ethos-U55`.
The qualifier to build/run application with FVP is
`mps3/corstone300/fvp` for secure and
`mps3/corstone300/fvp/ns` for non-secure.
- Note: the qualifier to build/run application with board mps3/an547
is now changed to
`mps3/corstone300/an547` for secure and
`mps3/corstone300/an547/ns` for non-secure.
How is it changed?
- Moved common code from mps3/an547 to corstone300.
- Renamed soc for an547 to corstone300 and added
a new soc corstone300/an552.
Why do we need this change?
- This enables FVP support and testing for corstone300.
- SOC/qualifier for mps3/an547 was renamed to reduce code redundancy
- A separate FVP variant was added for AN552 because, the TFM board
used for non-secure variant differs for FPGA and FVP.
TFM board `arm/mps3/corstone300/fvp` should be used when testing
AN552 with FVP and `arm/mps3/corstone300/an552` should be used when
testing with AN552 FPGA.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
For tests that support both targeting unit_testing and
other targets, we check in the cmake code the BOARD variable.
Let's allow users to set this to either of unit_testing
or unit_testing/unit_testing so it behaves like for other
tests.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Adds a test to ensure that the LoRaWAN MCUmgr transport builds with
all options enabled and all options disabled
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Replace OVERLAY_CONFIG with CONF_FILE since no-device-pm.conf
contains an alternative configuration to the one in prj.conf
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Use full board name in cmake file.
Akin to the fix done in zephyrproject-rtos#80270
zephyrproject-rtos#80270
following the changes from
zephyrproject-rtos#77250
In which twister now uses the full board name when calling cmake.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
