The BAP_BROADCAST_SOURCE Kconfig option now depends on
BT_ISO_BROADCASTER instead of selecting it.
This is an effort to reduce the use of select in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the selects and use def_bool for BT_AUDIO_RX and
BT_AUDIO_TX.
This is part of an effort to reduce select in Kconfig.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the Kconfig options to depend on the GATT
features rather than selecting them.
This is part of an effort to reduce the amount of
selects we use in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the selects from BT_BAP_UNICAST_SERVER and BT_BAP_UNICAST_CLIENT
and use a def_bool for BT_BAP_UNICAST.
This is part of an effort to reduce select in Kconfig.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use configdefault when enabling LV_COLOR_SWAP_16 within boards and
shield definitions, to avoid OR'ing the dependencies for the Kconfig
symbol. Otherwise, a user manually selecting LV_COLOR_DEPTH will
encounter build errors as LV_COLOR_SWAP_16 may be enabled when
LV_COLOR_DEPTH_16 is not selected
Fixes#81546
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The prior link to the I2C specification was broken and no longer
accessible. Updated the link to a valid and current URL
Signed-off-by: Dhruv Menon <dhruvmenon1104@gmail.com>
Addresses in cmd_load() should always be unsigned. Previously, strtol()
was used, which is limited to signed long values, causing issues with
addresses >= 0x80000000. This commit replaces strtol() with strtoul(),
ensuring proper handling of the full 32-bit address space.
Fixes#81343
Signed-off-by: Aaron Fontaine <aaron.fontaine@dojofive.com>
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@verkada.com>
Previously PMP was avaible only with Multithreading, since it's now
available without MT - add extra checks to prevent user/kernel mode
reconfiguration.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
USE_HYPERRAM macro defined shouldn't be placed under
CONFIG_BOOT_FLEXSPI_NOR.
Add flexspi1 pinmux pinctrl and flash partitions
Add flash partitions and correct flash parameter.
This commit was tested with samples: flash_shell on cm33/cm7 cores
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
add flexspi.c file to get flexspi clock rate.
Enable flexspi1 clock if don't boot from flash.
Use custom fixed mpu_regions.c file to config MPU for CM7
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
A valid device tree configuration is provided for the ADCs of the 8 input
channels and the sample adc_dt works out of the box. Obviously this is
not the only possible configuration but it provides a good template for
further customization without the need to lookup the ADC GPIOs and
connections in the schematics.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
This set of changes enables the RS485 hardware connected to usart3 and
provides some overlays that allow for easily running the modbus
rtu_client and rtu_server samples on Opta.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Some changes to cleanup and clarify some device tree nodes:
* removed wrong sdram2 definition
* added all internal flash slots accessible from M4
* added all internal flash slots accessible from M7
* removed CONFIG_UART_LINE_CTRL because not needed by USB CDC ACM
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
This set of changes reorganize the ethernet configuration by removing the
use a regulator to enable the PHY: the correct GPIO pin is set in code
only if the network has been configured via CONFIG_NET_L2_ETHERNET.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
As long as MBEDTLS_ENTROPY_C is enabled, Mbed TLS needs to
poll some entropy source to gather data that will then be
processed by CTR/HMAC-DRBG modules. This means that in most
of the cases, once MBEDTLS_ENTROPY_C is enabled then also
MBEDTLS_ENTROPY_POLL_ZEPHYR needs to be enabled. This was
done manually until now, as the long list of samples/tests
demonstrate.
This commit solves this dependency by defaulting
MBEDTLS_ENTROPY_POLL_ZEPHYR to on as soon as
MBEDTLS_ENTROPY_C is set. As a consequence, all manual
enablement of MBEDTLS_ENTROPY_POLL_ZEPHYR in samples/tests
are removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The main problem of MBEDTLS_PSA_CRYPTO_LEGACY_RNG is that it
brings in some legacy modules (entropy + ctr_drbg/hmac_drbg)
which means extra ROM/RAM footprint.
MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG instead simply calls to the
CSPRNG which makes it definitely smaller.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Auto-select MBEDTLS_CIPHER_AES_ENABLED when AES support is requested
through PSA (i.e. CONFIG_PSA_WANT_KEY_TYPE_AES) and the PSA support is
provided through Mbed TLS itself (i.e. CONFIG_MBEDTLS_PSA_CRYPTO_C).
This mimic what happens in Mbed TLS at build time: if AES support
is required through PSA, but there's no one else providing it
(i.e. no TF-M in Zephyr) then provide this support through legacy
AES module.
This is useful in samples/tests so that the user can simply use the
PSA_WANT symbol to ask for AES support in PSA crypto and then tune
the AES features (ex: CONFIG_MBEDTLS_AES_ROM_TABLES) without the need
to also define CONFIG_MBEDTLS_CIPHER_AES_ENABLED.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Removing direct #define usage in the DTSI file and converting these
definitions to use a dt-bindings header instead.
Relocates the RPI_PICO_DEFAULT_IRQ_PRIORITY definition to a DTSI file and
introduces an override.dtsi file. The override file is used when no other
override file is present, allowing for better flexibility and compliance
with Zephyr’s DTS structure.
Fixes: #79719
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Previously, ipv6 being disabled was a dependency of the hw acceleration
of the checksums for the nxp enet driver, because this ethernet has an
errata causing icmpv6 checksum to not be supported. Now, there is a new
config type in ethernet api for checksum types, so we can re-enable
hardware acceleration for ipv6 by implementing this type in the
get_config api in this driver.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves stropts into a singular
testsuite at tests/posix/xsi_streams app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
The filter here should be used to filter for capability:
whether the platform configuration supports userspace. And if
it does support userspace, we then enable CONFIG_TEST_USERSPACE
(and thus CONFIG_USERSPACE) for testing. We should not be
filtering for whether userspace is enabled, but should really
be filtering for whether userspace is supported.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The filter here should be used to filter for capability:
whether the platform configuration supports userspace. And if
it does support userspace, we then enable CONFIG_TEST_USERSPACE
(and thus CONFIG_USERSPACE) for testing. We should not be
filtering for whether userspace is enabled, but should really
be filtering for whether userspace is supported.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Split the cached area and assign both parts IROM and DROM meaning. This
is necessary to overcome the esptool section merging issues.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
The LVGL flush thread was hard-coded to be cooperative.
For long-running actions like data transfer to the display,
this is problematic as it might block high-frequency actions like
USB or input events.
Hence, make it configurable to be preemptive, and rename it to match the
similar Kconfig values like CONFIG_SDL_THREAD_PRIORITY.
Signed-off-by: Martin Stumpf <finomnis@gmail.com>
802.11 doesn't have specific constraints, it just says that listen
interval should be >=0 and it a 2 byte field.
3 as a typical DTIM value from nRF chipsets, so, remove the hardware
specific line and just set a failure.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Listen interval as per 802.11 has units as "beacon intervals" i.e., 1
means 1 beacon interval duration (or short beacon interval duration if
short beacon is enabled).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The prior image was of poor quality, making it difficult to interpret.
Updated the image with a higher-quality version.
Signed-off-by: Dhruv Menon <dhruvmenon1104@gmail.com>
Instead of doing an `irq_lock()`, use per-instance spinlock instead.
Refactored out an unlocked version of `local_irq_is_enabled`
from `riscv_plic_irq_is_enabled()` to achieve that.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Without multithreading only two stacks present: ISR and main.
As any stack they also could overflow, so it make sense to add stack
guard for them also.
Remove stack guard dependency on multithreading and mark
`Z_RISCV_STACK_GUARD_SIZE` bytes at the beginning of stack as read-only
region with PMP entry.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Handle AF_UNIX family sockets for NSOS offloaded driver
Note that the size of struct sockaddr_un is done conditionnaly based on
CONFIG_NET_NATIVE_OFFLOADED_SOCKETS
Also, NET_SOCKADDR_PTR_MAX_SIZE needs to be updated only if
CONFIG_NET_SOCKETS_PACKET is not set. Otherwise, for a AF_PACKET socket,
a struct net_context variable can be corrupted, as local would have be on
16 bytes instead of 20 bytes.
Signed-off-by: Noemie Gillet <ngillet@sequans.com>
To remove CONFIG_PINCTRL from board side for numaker boards.
The Drivers using Pinctrl should be turning Pinctrl on
instead of the responsibility of the board.
Fixes#78619
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
The pull context LwM2M client's set_socketoptions callback is currently
unused and can't be set by a user. Add a public API to set the
pull context's client's set_socketoptions callback.
Signed-off-by: Andi Gerl <andi.gerl@exacttechnology.com>
When larger buffer index was introduced only function:
eeprom_target_write_received() was updated to handle
address-width = 16
This adds the same functionality when buffered API is used,
enabled by CONFIG_I2C_TARGET_BUFFER_MODE.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
Updates the GitHub security page with the current supported versions
after the v4.0.0 release.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
When linking and relocations are performed on the ELF object itself
with no copying, also global binding linking can break references.
Disable linking globally for such cases.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The LLEXT linker for Xtensa cannot relocate FLIX commands, disable
them in extensions only until we have a solution. Note, that this
only affects extensions, the main Zephyr binary is still built with
FLIX commands.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
