Add snippet that can be used to enable packet trace output from
Silicon Labs Series 2 devices.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The Packet Trace Interface is a debug interface that emits TX and RX packet
data over a serial connection in real time.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Add a new driver class for drivers related to debugging, such as
trace hardware, performance counters etc.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The target variable is a `uint8_t`. It is not reasonable to pass a
value with `uint16_t` in little-endian format.
Remove `sys_cpu_to_le16`, and pass the value directly.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Add a new sample demonstrating the use of the Renesas ELC
Signed-off-by: Khanh Nguyen <khanh.nguyen.wz@bp.renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Add a new test suite for the Renesas ELC driver.
Signed-off-by: Khanh Nguyen <khanh.nguyen.wz@bp.renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Add ELC nodes to RA SoC DTS files and provide
device-specific ELC signal enums for Devicetree bindings
Signed-off-by: Khanh Nguyen <khanh.nguyen.wz@bp.renesas.com>
Add support for the Renesas RA Event Link Controller, including
driver sources, Kconfig, and Devicetree bindings.
Signed-off-by: Khanh Nguyen <khanh.nguyen.wz@bp.renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
make sure the hal is stopped, before
configuring the link. The phy can change the
speed without notifying a link down in between.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
When using target mode, we've found that some times the msg field can
be null through some of the code paths of the interrupt event handler.
Signed-off-by: Yuval Peress <peress@google.com>
Avoid k_sleep() never being called when video_write_reg_retry() and
video_read_reg_retry() have a number of retry set to zero (default).
The default number of retries being controlled by
CONFIG_VIDEO_I2C_RETRY_NUM.
Signed-off-by: Josuah Demangeon <me@josuah.net>
When using Zero Latency IRQs do not invoke ISR_DIRECT_PM and
do not return to reschedule in the kernel.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The `owned-channels` property specifies which channels are assigned to
a given target. Additionally, the `source-channels` or `sink-channels`
property defines channels that can be used to forward an event outside
the DPPI domain, otherwise they can only be used within it.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
The async_user_callback could be triggered from
both the DMA transfer complete interrupt and
a k_work queue timeout. Since the timeout runs
outside of an ISR context, it could be interrupted
by the DMA ISR. This might leads to a race condition
where both paths access and modify shared
DMA buffer state (offset and length) simultaneously,
causing data corruption or out-of-sequence processing.
Introduces proper synchronization to prevent concurrent
access to shared DMA buffer variables,
ensuring consistent and reliable data handling.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Add clear, step-by-step guide for generating test certificates using
FreeRADIUS scripts, including file renaming and usage notes.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Fixes the JEDEC-ID value of the W25Q32JVWJ on-chip flash of RT1024.
It was incorrectly set to the value for the different IS25WP064 chip.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Allow network shell DNS module to verify that the DNS SD
record is a valid one. Currently this is not exposed to
applications.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fixes building an lvgl sample with CONFIG_CPU_LOAD enabled.
cpu_load_get function requires 1 argument.
Signed-off-by: Matthias Alleman <matthias.alleman@basalte.be>
In high throughput tests it's fairly easy to overflow the current 32-bit
byte counters in net statistics (it's just over 4 GB of data).
Therefore, make the byte counters 64-bit to prevent overflows.
Rearrange some fields to avoid padding.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
net_stats_t type is an unsigned type, therefore %u should be used
instead of %d when printing values of this type, otherwise negative
values will be printer if INT32_MAX is exceeded.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Microchip is adding more non-MEC devices to Zephyr such as
SAM and PIC32. Each device family will have its own subfolder.
We moved the existing MEC DTSI files into a new mec subfolder.
We also updated the existing MEC boards include paths.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Updated driver based on changes done in SDK 25.06.00-pvw2.
Update hal_nxp to include BLE LL and IEEE 802.15.4 PHY NBU
combo firmware for MCXW72 boards.
Signed-off-by: Cristian Bulacu <cristian.bulacu@nxp.com>
Updated mcxw_get_time function to output its result in nanosecond
resolution and updated code accordingly.
Signed-off-by: Cristian Bulacu <cristian.bulacu@nxp.com>
Restore main stack size to the default value since fake entropy
implementation from mbedtls is replaced by STM32 entropy driver.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
Call entropy APIs to use TRNG peripheral on STM32WB0x devices for BLE
purposes.
Enable RNG node on Nucleo-WB0x boards.
Remove RNG initialization as it's done in the entropy driver.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
On Cortex-M33 the access to peripheral registers doesn't act as a data
synchronization barrier for memory accesses to normal memory. So before
triggering any TASKS for cache operations we need to make sure the core
doesn't have any pending memory transactions.
Signed-off-by: Karsten Koenig <karsten.koenig@nordicsemi.no>
When reception is restarted (STARTRX after ENDRX but no STOPRX) it is
possible that FRAMETIMEOUT countdown counter will not be started by
the first received byte if byte was already being transmitted when
STARTRX was called. If that is the only byte then it is expected that
timeout will be triggered but since FRAMETIMEOUT counter is not started
there is no FRAMETIMEOUT event which has short to STOPRX. This
situation will happen in case short buffers are used (< 5 bytes)
because then short ENDRX_STARTRX is not used then.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Converting absolute system ticks to RTC ticks is simple. It needs to be
multiplied by CYC_PER_TICK (which by default is 1). Complex algorithm
was used when driver was not tracking current 64 bit tick and function
was returning uint32_t.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
