This PR corrects the base addresses and region names of some memories
present in the MPS3-AN547 hardware.
Fixes#71920
Signed-off-by: Manuel Loew <manuel.loew.infineon@gmail.com>
Add DMA channels at SOC level for the LPC55S6x series SOCs, as the dma
requests are SOC specific properties and do not need to be modified at
the board level. Remove any DMA request definitions present at the board
level for the LPC55S69 evaluation board.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Declare a sub-region of the whole ext_memory with attributes
ATTR_MPU_IO so that XiP becomes possible on this external
octo- NOR flash. Use the STM32CubeProgrammer runner
with the external loader for flashing.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Declare a sub-region of the whole ext_memory with attributes
ATTR_MPU_IO so that XiP becomes possible on this external
octo- NOR flash. Use the STM32CubeProgrammer runner
with the external loader for flashing.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Update dts to use ST7735R via MIPI DBI API.
Also, remove the reset-gpios, as on this board the LCD RESET pin is
directly connected to the system reset. And add LCD backlight pin
connected to PE10.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
Mention that we have the RADIO peripheral,
but no encryption accelerators yet.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The RADIO models now contain the radio,
let's stop removing it, but as they do not support DFE,
let's disable DFE.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This commit should deal with optimizing device's
operation in terms of power consumption. In this
context:
1. Power and rail managers are enabled so that the
device can enter the sleep state and power
rails be set to the min. required levels.
2. Peripheral blocks should be enabled only when
there is need to do so.
3. Define the internal RCX oscillator as default
low power clock. RC32K should not be used as
it drifts significantly due to temperature and
voltage variations. Thus, affecting the whole
system stability regardless of its calibration.
4. PLL should be enabled only when requested and
on board level LP clock should be switched to
XTAL32K to avoid overhead due to RCX calibration.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
The driver isn't currently buildable due to "west blobs" support never
having been added for hal_telink. Furthermore, even if the blob
dependency is manually made available it turns out the code has
bitrotten to the point where it doesn't build anymore. This situation
has continued for several years without anyone taking action, so I think
it's safe to assume this is unmaintained and should be removed.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
The 'tfm' tag was removed from the samples in in
7c80473e0a but it remained in use in other
parts of the project.
This change brings back consistency through out the project.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
- Set MCUBoot "upgrade only" method,
as the program size is 128B (>32B).
- Set slot sizes to the same value,
required by the MCUBoot "upgrade only" method.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The default has been changed to EC-P256, but there are issues with
this board when TF-M is compiled with MCUBOOT_USE_PSA_CRYPTO (required
by EC-P256) because of its integration in TF-M.
Do not enable PSA crypto on this board for the time being.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Code adds pm action function that stores SPI configuration
before PD_COM is allowed to be turned off.
PM_DEVICE_RUNTIME scheme is also supported
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
This commit should add all the functionality needed for the I2C
driver to work when PM is enabled.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
This adds support for the local APIC in one-shot mode as the timeout
event source for those cases where the CPU supports invariant TSC but
no TSC deadline capability. It is presented as another timer choice.
Existing Kconfig symbols were preserved to minimize board config
disturbance.
This hybrid approach was implemented kind of backward in the apic_timer
driver but it is far cleaner to carry this here.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This test feature is not required and was only used as a dependency in
the usb/console example. It is redundant since the sample already
depends on usb_device.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Added MAX32690EVKit board
For more information about this board please check
https://www.analog.com/
MAX32690 has two core, Cortex-M4 and Risc-V.
Examples can be build by below command for cortex-m4
west build -b max32690evkit/max32690/m4 samples/hello_world
As a shorthand, the soc may be omitted from the build command and
keeping the corresponding forward slashes:
west build -b max32690evkit//m4 samples/hello_world
Co-authored-by: Jason Murphy <jason.murphy@analog.com>
Co-authored-by: Maureen Helm <maureen.helm@analog.com>
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Introduce `robot` command for running Robot Framework test suites.
Initial implementation consists of one runner dedicated for renode-test,
which is a Renode wrapper for running Robot tests.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Introduce `simulate `command for running samples on a simulator of
choice. Initial implementation consists of one runner, dedicated for
Renode.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
Initial integration with renode-test was introduced in commit bdf02ff,
which added support for calling the `renode-test` command from both west
and twister.
This commit removes the custom run_renode_test target used for running
Robot tests with the `west build` command and makes twister call
`renode-test` directly instead.
Signed-off-by: Michał Szprejda <mszprejda@antmicro.com>
This commits add the BLEIF instance which is compatible with
"ambiq,spi-bleif" on Ambiq apollo3p_evb and apollo3_evb.
Also creates the default pinctrl for the defined instance.
Signed-off-by: Aaron Ye <aye@ambiq.com>
The RTC subsystem in espressif's SOCs, among other tasks
is responsible for clock selection for CPU and for low
power domain clocks such as RTC_SLOW and RTC_FAST.
This commit allows for proper clock source and rate
selection for CPU, using the espressif,riscv and
espressif,xtensa-lx6/7 bindings.
It also enables clock selection for RTC_FAST and RTC_SLOW,
that impacts some peripherals, such as rtc_timer.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
- Add pinctrl for flexcomm0 in usart mode
needed for BLE tester application
- Reserve the firmware storage partition
- Mark HCI as a wakeup source
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
- Add initial version of CYW920829M2EVK-02 board
- [drivers: clock_control] Make it possible to set up both iho and imo
clocks instead of just one or the other
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Refactor the 54L board file to be able to better support out-of-tree
non-secure boards.
This aligns better with nrf53's DT.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
In order to avoid defining almost the same overlays in the available
sample codes, tests and user applications, a common overlay file
per memory type is demonstrated under the boards dts folder.
Currently only the PSRAM interface is supported and the APS6404L
PSRAM QSPI memory device is demonstrated. In doing so, an
application code will only have to define another overlay file explicitly,
under application's board folder, to overwrite the default QSPI
controller's settings. In either case, users should explicitly
invoke the requested overlay files at 'west build' invokation
via the DTC_OVERLAY_FILE system variable.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Added initial board support for the
frdm_ke15z board.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Signed-off-by: Pavel Krenek <pavel.krenek@nxp.com>
Two pins assigned to SPI controller (P0_22,P0_23) are dedicated
to XTAL32K which is present on devkit.
For this reason SPI function are re-assigned to pins available
on optional header MikorBUS 1 to match configuration of SPI2
which is routed to MikorBUS 2 header.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
This board HW models now include the RRAMC, FICR and UICR.
Let's update the docs accordingly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The RRAMC is now supported by the HW models.
Let's enable the RRAM controller, and
add a storage partition definition which
tests and samples can use by default.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
With the introduction of the new Hardware model, we now have an easy
method to describe variants of boards. This is especially helpful for
Microchip's PolarFire SoC Icicle Kit which has a heterogeneous
core-complex. Introduce an SMP capable variant with four SMP capable
harts for the SMP cluster and disables the e51 monitor hart
Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
This commit adds support for the I2C which
can be found in Apollo3 SoCs, it can work in
both DMA and non-DMA modes
Signed-off-by: Hao Luo <hluo@ambiq.com>
