NFFS is removed as it has serious bugs (by design) which haven't
been resolved since extended range of time.
One of most serious issues bunch were described here:
https://github.com/apache/mynewt-nffs/issues/10
Since lack of support NFFS upsterem it doesn't make sense to keep
it in zephyr.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
As multi-fs testsuite uses FS and NFFS it must be disabled
as NFFS was removed. Further thin test should be reworked to use
litlefs in place of NFFS.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
NFFS configuration was removed.
Added working configuration for nRF boards.
Documentation aligned to fact that littlefs is supported.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This patch addapt the sample to using LittleFS as the FS back-end.
After NFFS will be removed this ensures mcumgr FS command functionality.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
smp_svr cleanu
settings nffs targeted test were removed.
the file function settings suite was disabled as need some
rework in order to use litlefs.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
According to NRF product specifications the smallest write unit is
32-bits. Added parameter 'CONFIG_EMULATE_ONE_BYTE_WRITE_ACCESS'
which allows one byte flash write using more complex operation.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Toggling this symbol probably doesn't make sense, because the
architecture is already known when Kconfig runs.
SCHED_IPI_SUPPORTED is enabled through being selected by the ARC_CONNECT
(maybe that one shouldn't be configurable either) and X86_64 symbols.
Note that it's not possible to disable the symbol when it's being
selected, so trying to turn it off on e.g. X86_64 won't work either.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Grouped all nRF driver sub-option under SOC_FLASH_NRF
menuconfig.
This makes menuconfig cleaner.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Create new instances of SPI using single STM32_SPI_INIT() macro
invocation, similar as it is done for STM32 UART driver. Add also
implicit '#ifdef CONFIG_SPI_id' check, so it further reduces required
lines of code for each SPI instance definition.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
To facilitate extending the generated reports without having to
patch this file, leverage generator-expression so that
dependencies can be added to the 'zephyr_property_target' target.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Some architectures require more space on the stack when running samples
and tests while the philosopher test (cmsis_rtos_v1) is still using a
fixed-size stack size.
Since the test is going to use CMSIS v1 we cannot directly use
CONFIG_TEST_EXTRA_STACKSIZE to grow the stack size because the extra
space allocated can excess the maximum size allowed by CMSIS and defined
by CONFIG_CMSIS_THREAD_MAX_STACK_SIZE, causing the sample to halt on the
assertion (thread_def->stacksize <= CONFIG_CMSIS_THREAD_MAX_STACK_SIZE).
To avoid this problem (and align the test to what has been already done
on the philosopher test using CMSISv2) we set the stack size to the
maximum allowed size of CONFIG_CMSIS_THREAD_MAX_STACK_SIZE.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
CPU_CORTEX_M_HAS_SYSTICK and CPU_CORTEX_M_HAS_VTOR do not need
to be explicitely selected in SoC/Boards definitions of
platforms implementing the Cortex-M mainline architecture; they
are already selected by ARMV7_M_ARM8_M_MAINLINE Kconfig symbol.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add runtime error handling for k_msgq_cleanup. We return 0 on success
now and -EAGAIN when cleanup is not possible.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add runtime error checking to k_pipe_cleanup and k_pipe_get and remove
asserts.
Adapted test which was expecting a fault to handle errors instead.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove static helper functions used only once and integrate them into
calling functions.
In k_sem_take, return at the end.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Check for errors at runtime and stop depending on ASSERTs.
This changes the API for
- k_sem_init
k_sem_init now returns -EINVAL on invalid data.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
k_mutex_unlock will now perform error checking and return on failures.
If the current thread does not own the mutex, we will now return -EPERM.
In the unlikely situation where we own a lock and the lock count is
zero, we assert. This is considered an undefined bahviour and should not
happen.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define there options for runtime error handling:
- assert on all errors (ASSERT_ON_ERRORS)
- no runtime checks (no asserts, no runtime error handling)
(NO_RUNTIME_CHECKS)
- full runtime error handling (the default) (RUNTIME_ERROR_CHECKS)
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Function cpu_stats_get_ns from CPU stats module returns
invalid time, because of unnecessary conversion into u32_t.
Higher bits of time value are removed during this conversion.
All time values are u64_t, so there is no need to convert anything.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
STM32L073 soc variant is a STM32L072 with LCD peripheral.
Reflect this in dts definition by including stm32l072.dtsi
in stm32l073.dtsi.
This also allows to fix an issue on stm32l073 gpioe which
declared wrong reg definition.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On nRF platforms, Xtal LF clock source starts hundreds of milliseconds.
Until it is not started, test may fail due to wrong timing. Add initial
delay in the test for required clocks complete their start-up.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Refactor use of #ifdef to IS_ENABLED() pattern for handling cancellation
of outgoing connection attempt. Reduce the amount of indentation by
combining outer if-statements.
Move handling of canceled create connection into a helper function.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix advertiser requested to use the identity address while privacy
feature is enabled will change to using RPA address when advertise is
resumed or when RPA timeout occurred.
RPA timeout does not need to run when advertiser is using identity.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add shell command for advertise with identity option to have the
possibility to temporarily disable privacy feature in the advertise from
the shell.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle initiator role when RPA timeout expires. For direct connect
establishment procedure we make sure the RPA is refreshed when starting
initiator and limit the timeout to the RPA timeout.
For auto establishment procedure we cancel the initiator and restart it
again in the connection complete event that is generated when canceling
an initiator.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle starting of advertiser and scanner or initiator when advertiser
is using a different identity than the default identity to generate the
random resolvable address in the controller.
We need to handle this only for the privacy case because the random
address is set in the RPA timeout handler and not from the API.
When privacy is disabled we can return error code from the LE Set Random
Address HCI command instead.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix RPA timeout handling when the scanner is active. An active scanner
must be restarted at RPA timeout otherwise the Set Random Address
command will fail.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the handling of sending the LE Create Connection command and
for whitelist and direct initiator to use the same host state flag
and common handling of the privacy address.
Also simplify the way we check if the procedure has already been started
when application tries to start it again.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle a possible race condition in the host connection state.
Set the conn state of the connection object before command is sent. This
is in case the calling function is not scheduled again before the
connection complete event arrives. In this case find_pending_conn will
not find the connection object.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Starting a background scanner for auto-connection is an API that is only
available when whitelist API is not enabled.
There is currently no way to set this bit when the whitelist API is
enabled so there is not any issues with the current code, but it is
still not correct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When receiving a connection complete event but no connection object are
available in the host something strange has happened. In this case
the controller might have a connection that cannot be controlled by the
application. It would then be sensible to disconnect this connection in
the controller.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove link board can, shield was discontinued in
prototype status and will be replaced by a successor.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add sample demonstrating the integration of CANopenNode in Zephyr to
support the CANopen protocol.
This fixes#15278.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for CANopen LED indicators according to the CAN in
Automation (CiA) 303-3 specification.
This fixes#15278.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for storing the CANopen object dictionary to non-volatile
storage.
This fixes#15278.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
