Update i2c_emul.c to support i2c_target_register and i2c_target_unregister
function calls as well as support address forwarding in emulation.
Address forwarding helps us test IPCs in native sim. Instead of having to
emulate 2 separate cores, we can forward read/write requests from one bus
to another bus (effectively creating a loop). This way the same image can
simulate both the controller and the target.
Signed-off-by: Yuval Peress <peress@google.com>
Packet buffer is designed to run writer and reader code on two CPUs.
The write function cannot be preempted by the read function in a CPU,
or the cache management could result in data corruption. In the tests,
the reader and the writer are executed on a single CPU. Disable data
cache management to prevent potential data corruption.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The MQTT publisher/subscriber/pubsub tests suites are currently
depending on an external MQTT broker being available. In result, the
test suites cannot be executed in twister and need to be run manually,
which makes them kind of pointless from the CI perspective.
This commit reworks the tests, so that they no longer rely on an
external broker being available, but rather implement minimalistic
broker functionality for test purposes only. This will make the tests
self contained, and thus executable in the CI.
Since it makes not point to duplicate the effort between the test
suites, the test suites have been merged into a single mqtt_client test
suite.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently existing tests suites verify MQTT 3.1.1 functionality,
therefore group them together under "mqtt/v3_1_1" directory, so
that the test base can be extended easily in the future with MQTT 5.0
tests without collision.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add spi configurations of NXP frdm_ke17z and frdm_ke17z512 boards,
tested spi_loopback sample for lpspi drivers.
Update the "HAS_MCUX_*" kconfig to "DT_HAS_*" in testcase.yaml
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
This overlay is no longer needed, as presently there are more test
scenarios covering all combinations of DMA and SPY_ASYNC support for
LPSPI peripheral.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
qemu_riscv32e uses a different ISA and is kinda special, add it
to the testcase for better coverage.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add an opaque pointer to store upper layer private data and initialize
it with the USB device context during controller initialization. Use the
pointer in event processing to get the correct context.
Fixes commit 48f2a4bc1a
("usb: device_next: remove initialized state checks in event processing")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Enable 'chan_blen_transfer' and 'loop_transfer' tests for MAX32670EVKIT.
Co-authored-by: Maureen Helm <maureen.helm@analog.com>
Signed-off-by: Mert Ekren <mert.ekren@analog.com>
For commonly-accessible I2C nodes, status and pinctrl are now set in
board dts. Remove these properties from test overlay files.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
The test `storage.flash_map.mpu` for `nrf52840dk/nrf52840` fails
althought the output is correct. Time to test execution is not enough.
This change extend test execution timeout.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
[Description]
Device hang is observed when LE Scan
[Root Cause]
For le_ext_adv_report, Data[i] of one adv report is 0-229,
for the adv_buf of saving, it just is 73 bytes, so sometimes
the bytes of adv report is more than the adv_buf, resulted hang
[Fix]
consider the le ext adv case.
[Testing]
After modified, Device hang is not observed after stress
testing with LE Scan
Signed-off-by: Guotao Zhang <guotao.zhang@nxp.com>
Moved helper methods from tests/boot/with_mcumgr to pytest-harness
package. It can be reused by other tests.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Setting SOURCES before calling find_package() was deprecated in #51049.
Cleanup usage of SOURCES and instead use the proper target_sources()
CMake function.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #73831
find_package(Zephyr) should be called before first project() call.
Zephyr package will test and force-set the correct toolchain, especially
the C compiler.
The project() will also set the C compiler, if not set already.
If project() is called first, then conflict arises on the C compiler
selection and thus the following message is seen:
> You have changed variables that require your cache to be deleted.
> Configure will be re-run and you may have to reset some variables.
> The following variables have changed:
> CMAKE_C_COMPILER= /usr/bin/gcc
This cache deletion results in other errors, such as a missing BOARD
setting.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Convert NXP System Timer Module driver to a native driver.
Timer prescaler in tests is updated because short relative alarms
sometimes give false positives.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Create stubs for getpwnam_r, getpwuid_r, getgrgid_r
& getgrnam_r.
These functions are in the _POSIX_THREAD_SAFE_FUNCTIONS
option group.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Implementation to take command-line arguments to set log level in run
time for bsim module. Set default log level if no log level is passed
at runtime
Signed-off-by: Guru Mehar Rachaputi <gurumeharrachaputi@gmail.com>
Add commands to allow requesting a subrate change via the BT shell.
A new build configuration has been added to ensure this is tested in CI.
Signed-off-by: Aleksandar Stanoev <aleksandar.stanoev@nordicsemi.no>
Enable the Software Watchdog Timer instance on this board.
Now that SWT is enabled for this board and made the default watchdog,
sample.task_wdt.no_hw_fallback can be removed as is no longer needed.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
