Verifies that we don't leak connection references when the peer goes out
of range whilst we are fragmenting and sending data to the controller.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
native_posix is deprecated, let's switch the
description & comments to refer to native_sim instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
An ifdef should have been also checking for native_sim,
let's correct it.
Note: By now native_sim builds with "native_posix compatibility mode"
enabled, which sets BOARD_NATIVE_POSIX to avoid breaking all this kind
of dependencies. But that will stop soon.
So let's fix the dependencies.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
A few tests were only allowed for native_posix, but we are
deprecating it. Let's switch them to native_sim instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being deprecated, let's switch this test to native_sim
instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is being deprecated, let's switch this test to native_sim
instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test create a setup where an ISO broadcaster will send fragmented
data and get stopped after sending the first fragment and repeating that
operation multiple time to verify that buffers are not leaked.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The BAP scan delegator test does not compile when
BT_BAP_BASS_MAX_SUBGROUPS is larger than 1.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Convert users of net_buf_put() and net_buf_get() functions to use
non-wrapped putters and getters k_fifo_put() and k_fifo_get().
Special handling of net_bufs in k_fifos is no longer needed after commit
3d306c181f, since these actions are now
atomic regardless of any net_buf fragments.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add DMA channels to test overlay files as DMA support is now available
for MAX32 I2C driver.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
This adds platform_allow to limit the scope of platforms to
build and run. This avoids the need to constantly nudge
the platform filter lists to exclude platforms which fail
to build or run due to incompatible kconfigs.
Fixes#76945
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
SPI pins are defined in board.dts file to simplify usage
so that no need to redefine it in overlay files
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Enable SPI test for MAX32662EVKIT.
SRAM size increased to get enough space for SPI test image
Co-Authored-By: Sadik Ozer <sadik.ozer@analog.com>
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
Add MAX32655FTHR and MAX32655EVKIT board configuration for SPI loopback
test. Supports interrupt and asynchronous transfers as well as 16-bit
frames.
Co-Authored-By: Sadik Ozer <sadik.ozer@analog.com>
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
As nRF54L15 supports retained_mem driver,
this test should be executed on this target.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
It's usual to show debug logs as blue.
Showing dbg and info with different colors are good,
but it's preferable to keep info logs with default
color.
Signed-off-by: Félix Piédallu <felix@piedallu.me>
Some tests have a compile script for that test alone, named
`_compile.sh` or `_build.sh`. These scripts are useful for developers to
avoid compiling the world. But these scripts were not run in the CI.
These scripts were previously not suitable for running in the CI because
would put the artefact in the source directory, but this is no longer
the case, and the CI could run these scripts now.
This commit renames any `<test>/test_scripts/_compile.sh` and
`<test>/test_scripts/_build.sh` to `<test>/compile.sh`. The test runner
in CI will ignores any file named `compile.sh`, so there is no need for
a underscore prefix.
This fits into and extends the hierarchical structure of `compile.sh`
chain that starts at `:/test/bsim/compile.sh`, the CI build script tree.
The newly moved scripts now become a part of the build script tree,
called from a `compile.sh` where a duplicate set of build commands was
before. The sub scripts use `run_in_background` to preserve the
parallelism as it was before this change.
This removes an error-prone duplication and makes the CI test all the
build scripts.
Tests that did not have any compile script are not given one for now.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
As commit 6a1d9877ef ("cmake: Add LL_EXTENSION_BUILD to EDK flags")
made clear, only building an application with the EDK is not enough to
prevent regressions. This patch address that by also running the
application using the extension built with the EDK.
To provide a more comprehensive test, the application runs the extension
code on both kernel and user space, using a parameter sent by the
application. Assertions on the output from the application are used to
ensure expected results.
For now, tests only run on qemu_cortex_r5, but this can be expanded in
the future.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
As Renesas Hal is not compatitble with C++98 we use
filter CONFIG_HAS_RENESAS_RA_FSP to skip the test
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
The interval and latency for a CIG are set for each direction now,
allowing applications to use e.g. 10ms for sink ASEs and 7.5ms for
source ASEs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The max window time of RaspberryPi Pico WDT is 8,388,607 us(0x7FFFFF),
But 20,000ms have been set.
Correcting the value to 8,000ms to pass the test.
This was a problem that was discovered because the fix in
ccedcd1ac0 now properly handles the error.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
The nrf7002dk board's wifi chip requires blobs to build wifi driver.
Therefore it can not be built by CI. Exclude the board and its
variants from the wifi test suite.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Up to now there was only support for parsing/encoding 32-bit integer
numbers, with no support for larger ones.
Introduce support for 'int64_t' type, so that large numbers can be
serialized into JSON payloads.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add pwm configuration for frdm_ke17z and frdm_ke17z512 boards.
Set the alias of pwm-0 to ftm2 and test the pwm_api sample.
Update the ftm and pwt configuration to test pwm_loopback sample.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Increase the counter timer prescaler for some instances of NXP System
Timer Module, so that late alarms and short relative alarms are
excercised.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add a test that verifies no resources are leaked when re-assembling L2CAP
PDUs over an unreliable channel (ie. lots of disconnects).
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Today the thread analyzer depends on !ARCH_POSIX,
so this filter needs to filter any board for this architecture
not just native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
