Some hardware configuration require rely on the ALERT/RDY
pin to know when and ADC conversion is completed.
The polling thread is left as fallback, when the pin
is not defined.
Signed-off-by: Efrain Calderon <efrain.calderon.estrada@gmail.com>
Add a new macro, DT_ANY_COMPAT_HAS_PROP_STATUS_OKAY
name, evaluates to 1 if any enabled instance of `compat` has the
property or to zero if it hasn't.
This macro can be useful in drivers for a family of devices.
Signed-off-by: Efrain Calderon <efrain.calderon.estrada@gmail.com>
This example demonstrates I2S audio playback combined with the codec
API. It can use the dmic API for audio input.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Add Flexcomm signal sharing configuration for the mimxrt595s/cm33 and
mimxrt685s/cm33 SoCs. Properly instantiate the I3C peripheral for
interfacing with the WM8904's control port. Modify pinctrl DTs of
mimxrt595_evk/mimxrt595s/cm33 and mimxrt685_evk/mimxrt685s/cm33.
Instantiate the WM8904 codec for said boards.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Add clock config for Flexcomm peripherals functioning as I2S interfaces.
Add MCLK clock config for the WM8904 codec located on the mimxrt595_evk
and mimxrt685_evk boards.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Add sample rates. Add dai_route_t enum to allow codec configuration for
duplex operation. Allow for audio inputs to be controlled. Add functions
for signal routing.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Enable DMIC clock in soc.c - attach to chip's audio PLL. Add pinmux
definitions for the DMIC peripheral. Add nodes to SoC's device tree for
the DMIC peripheral and its audio channels. Configure the DMIC
peripheral in board's device tree to enable audio capture.
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Commit consists of minimal set of overlays need to run tests
and samples. Additionally disables nRF54L15 platform in cpp98
tests, because unnamed unions are not supported.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
timeutil internally uses 1900 as base year for calculation,
that is hidden from caller context. Thus declared a macro in
the public header file, and uses that macro will let caller adjust the
calulations accordingly.
Signed-off-by: Anuj Pathak <anuj@croxel.com>
find the headset which a2dp related record len is SEQ32,
fix sdp_client_get_total too because it doesn't handle
SEQ32 too.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
As the .bin & .hex build output is optional
and it can be disabled by CONFIG_BUILD_OUTPUT_BIN/HEX,
add support for the mandatory .elf build output
to the linkserver runner flash command.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Following addition of a `name` to hal_stm32 module, the command to fetch
blobs that are required to build BLE applications on STM32WBA socs is now
changed from `west blob fetch stm32` to `west blob fetch hal_stm32`.
Update documentation and warn users in migration guide.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Added volume offset for CAP commander
Added gain settings for CAP commander
Added play, pause and seeking for MCS
Added program_info and metadata update for PBP
Added long read and notify for all TBS characteristics
Added TMAP CG
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For mapping operations in sys_mm_drv_simple_map_region() and
sys_mm_drv_simple_map_array(), when there was an error with
mapping any pages, it would simple return an error, leaving
already mapped pages still mapped. This modifies the behavior
where any failure during the whole mapping operation will
unmap the already mapped pages.
This also modifies the remapping and moving functions to
reset mappings when error is encountered.
Fixes#73121
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If a diff only has added or removed lines we need to match both '-' and '+'
characters in the hunk context.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Adds the use of generic touch reporting method for stmpe811 driver.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Adds the use of generic touch reporting method for ft5336 driver.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Adds a way of reporting touchscreen events
taking common properties into account.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Adds common properties for touchscreen controllers.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This transforms the existing driver for the Microchip MCP9808
to be used as a generic driver to be used with all
JEDEC JC 42.4 compliant temperature sensor chips.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Caught by CI in another PR, should be 'Unsupported' instead.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Added entries in the release note & migration guide about the
changes to the `kernel thread` shell command.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Added commands to access the APIs in the kernel/cpu_mask.c
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Use `shell_strtoull()` to parse the thread ID argument for
error checking.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
`stacks` `threads` & `unwind` are commands related to kernel
thread, group them one level inside a main `thread` command,
and rename `threads` to `list`:
- `kernel threads` -> `kernel thread list`
- `kernel stacks` -> `kernel thread stacks`
- `kernel unwind` -> `kernel thread unwind`
Additionally, rename and mark the `thread_valid()` function
as `__maybe_unused` as it might be unused for architectures
without stackwalk implementation, and use the locked version
of the thread iterator (`k_thread_foreach()`)
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
