Move reset configuration from uart_stm32_data to
const uart_stm32_config struct, as this is set once at boot and isn't
modified during runtime.
Signed-off-by: Kenneth J. Miller <ken@miller.ec>
Move select include directives from source to header file, as these pull
data types required by the struct definitions contained within it.
This promotes a more modular file structure.
Signed-off-by: Kenneth J. Miller <ken@miller.ec>
The assert on L3_MEM_BASE_ADDR is incorrect, we need must convert
to uncached before use.
Fixes: ffd2121c65 ("soc: xtensa: intel_adsp: cavs: fix
power_down_cavs() signature")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Add missing definitions for ALH DAIs. Keep the same FIXME
reminder in the comments we have for ACE1.5 that explains
the background of these definitions.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Before, only following way of getting test-item build was supported:
`west build -b <BOARD> -T <PATH_TO_SOURCE/TEST_NAME>`
This commit allows to also call it by:
`west build -b <BOARD> <PATH_TO_SOURCE> -T <TEST_NAME>`
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
i.MX RT SoC have some pins related to the watchdog.
For example, iomuxc_gpio_ad_b0_15_wdog1_rst_b_deb allows WDOG1_RST_B_DEB
signal to be used as reset source for i.MX RT10xx boards.
Signed-off-by: Benjamin Lemouzy <blemouzy@centralp.fr>
The var "uart_xlnx_ps_driver_api" is defined twice in the source,
so remove one definition of it.
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
k_cycle_get_32() expands to RTC->COUNTER in nrf_rtc_counter_get(),
sys_clock_hw_cycles_per_sec() expands also properly.
Signed-off-by: Witold Lukasik <witold.lukasik@nordicsemi.no>
Update SNVS pin names in RT11xx DTSI files to align with new pin data
generated for the RT1176 and RT1166 processors. This pin data is stored
within the NXP HAL, so the SHA of the HAL is also updated by this
commit.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove commands which are already defined as subcommands for command
ivshmem. Moreover those commands recursively include themselves as
subcommands.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
To properly setup L1 exit timing this patch will use buffer interrupt
for HOST DMA and wait for Host HDA to actually start
First interrupt will clear all others.
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
This header is private and included only in architecture code, no need for
it to be in the top of the public include directory.
Note: This might move to a more private location later. For now just
cleaning up the obvious issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If network interface name support is enabled, print the name
when showing network interface data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure we use the network interface name (if configured)
instead of device name when binding to certain network
interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If CONFIG_NET_INTERFACE_NAME is enabled (default is y), then
system will automatically set a user friendly name to the network
interface like eth0, wlan0 etc.
Application can change the interface name if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Adjust the memory organization to avoid overlapping
critical regions from bootloaders (MCUboot and IDF)
Signed-off-by: Almir Okato <almir.okato@espressif.com>
Fix few mismatched CONTAINER_OF, few missing pointers to the first
element, one explicit casting.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add option to prefix log message with thread ID or thread name.
Align tests and add test case to the log_output test.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add Kconfig LOG_THREAD_ID_PREFIX option which allows storing
thread id in the log message and process it as message prefix
(as id or thread name).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Fix incorrect use of Max_SDU_Size and SDU_Interval parameters in
ISO Transmit Test Mode code.
Fixes EBQ test LL/CIS/PER/BV-08-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Davinci gpio controller support to add various soc gpio
support (J721E, AM654).
TRM for J721e https://www.ti.com/lit/zip/spruil1
File: spruil1c.pdf
GPIO: section 12.1.2
BeagleBone AI_64 https://beagleboard.org/ai-64
Signed-off-by: Prashanth S <slpp95prashanth@yahoo.com>
During Zephyr boot with SMP enabled,
while z_smp_init is not completed yet and only boot core is running,
incorrect code in broadcast_ipi API will cause following:
1. Generate IPI even if other cores are not booted.
2. Incorrect setting of sgi1r register.
3. All the affinity(1/2/3) value will be incorrect.
Signed-off-by: Chirag Kochar <chirag.kochar@intel.com>
GIC-600 and later interrupt controllers have an additional
GICR_PWRR register that controls the power up sequencing
of the redistributors. Added logic to gicv3_rdist_enable to
configure GICR_PWRR if required.
Signed-off-by: Chad Karaginides <quic_chadk@quicinc.com>
This reverts commit 577d47f3f1.
The --config= syntax with the equal sign does not work with clang 15
which is less than one year old (https://releases.llvm.org/). It does
not work with clang 14 either.
```
clang --verbose
clang version 15.0.7
clang --help | grep config
-cl-std=<value> OpenCL language standard to compile for.
--config <value> Specifies configuration file
--cuda-feature=<value> Manually specify the CUDA feature to use
clang: error: unsupported option '--config=/home/runner/work/...
```
The reverted commit mentioned "issues in some situations" without
providing any example or other information.
This revert fixes the SOF fuzzer build, see more details in #61778.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Created a seperate device tree file for the stm32f765.
Moved common nodes from the stm32f767 device tree file to the new file and
based the stm32f767 off the stm32f765.
Signed-off-by: Rahul Arasikere <arasikere.rahul@gmail.com>
This changes bt_audio_codec_cfg_get_val function to return the data
length found. Otherwise, this function gives no information about the
returned data length.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fix few mismatched CONTAINER_OF, one missing k_work_delayable_from_work
and few that should be pointing at the first elemnet.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Since __sha256_ram_block section must in the first 4KB,
h2ram_pool section is no longer included first inside the
RAMABLE_REGION.
Append h2ram_pool section at the end of used memory, so gap
due to alignment is still available for newly added variables.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
The twt and ps helper functions were not namespaced (were missing
wifi_ prefix).
Also change wifi_get_twt_... to more logical wifi_twt_get...
like the other twt prefixed functions and wifi_get_ps... to
wifi_ps_get... like the other ps prefixed functions.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This sample uses the DEVICE_DT_GET_ONE(COMPAT) to select the ps2 device
for a specific chip. This commit changes it to use the aliases to
let more chips which support the ps2 driver can build this sample.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
