For delayed reception only NRF_802154_RX_ERROR_DELAYED_TIMEOUT is
expected to happen, others rx errors should be handled in regular
manner.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Some failures are possible and expected from fime to time e.g.
NRF_802154_RX_ERROR_TIMESLOT_ENDED. Add informational log for the frame
reception failure to differentiate the specific case.
It can be helpful for analizing failure in network trafic.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Allows the setting of ieee802154 EUI64 address in non-secure processing
environment by reading the FICR device ID through the secure service.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Currently IEEE802154_NRF5_DELAY_TRX_ACC can exceed the max possible
value. Add upper bound to limit this.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Align clock accuracy used in CSL calculations to the value in platform.
This is recomended setting for devices working in wide range
temperature. Nevertheless it can be profiled in end product to decrease
CSL window duration and finally the power consumption.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Currently if an attempt to disable CSMA-CA in by setting an
appropriate flag in another (for example application)
CmakeLists.txt it caused lots of warnings. This fix allows
higher level CMakeLists.txt to disable CSMA-CA without
warnings.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
The API to set a callback has the namespace cipher but the driver
function pointer was using the namespace crypto. As this API belongs
to the cipher subgroup, just rename the function pointer in the driver
to be consistent.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Just give a better name to this file since now we have changed the
file where crypto driver API is defined.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This file defines the crypto driver API, cipher is supposed to be just
one type of capability (other can be hash) of these drivers, just
change the file name to be consistent with it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add 'cipher' namespace in some in the driver API since these
operations are for cipher.
Set a namespace to make it clear that these are cipher operations,
this allow further functionalities, like hash, to be added in this
driver API.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The updated nrf_802154 API accepts 64-bit time in microseconds.
The shim layer is updated to use 64-bit time.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Simplify driver implementation by using spi_dt_spec. Most internal
functions now take a device reference to simplify the operation, since
config did not exist before.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device already has a DT compatible (and uses DT properties).
Instantiate the device using the DT-based macros and remove hardcoded
name.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Simplify driver implementation by using spi_dt_spec. Note that driver
has 2 SPI configurations, identical except the speed. For this reason,
the slow config is still kept in RAM and copied from the one obtained
via the SPI dt_spec macros. A better solution would be to have macros
that allow to override the SPI frequency, but this can be improved
later. Most internal helpers have been adjusted to accept a device
reference to make SPI (and future GPIO) transition easier.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Due to serialization restrictions radio api calls cannot be nested, any
violation of this rule leads to a deadlock. This commit fixes the bug
by transferring the nested radio api call to ot_radio_workq.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
For multicore devices like nRF53, shim layer part of setting mac keys
and frame counters is called on application core where
CONFIG_NRF_802154_ENCRYPTION is disabled (the define concerns radio
driver for net core). This commit replaces
CONFIG_NRF_802154_ENCRYPTION with CONFIG_IEEE802154_2015.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Replace all get_dev_data()/get_dev_config() accessor utilities with
dev->data and dev->config.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When the csl is active the nrf_802154_sleep() is called unnecessary.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This commit fixes compilation warning (unused variable)
generated in nrf5_config_mac_keys function, when the ASSERT
macros were disabled.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
This commit updates the ieee802154 driver to match the current feature
set of the nRF 802.15.4 radio driver for nRF53 SoCs.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
- B91 SoC requires to set RX mode again if channel is changed
- Fixed wrong ACK packet detection, mask should be used
Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
Driver has dedicated workqueue for IRQ processing.
Submit work to dedicated workqueue intead of system workqueue.
It also fixes driver functionality when NET_TC_TX_COUNT is set to 0.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Define a custom IEEE802154 based L2. The user can then use those symbols
to implement their own 802.15.4 based L2, based on those symbols, w/o a
need to modify the Zephyr tree.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some 802.15.4 L2 implementations expect that FCS length is included in
the overall packet length while others not. Allow to configure this
behavior, based on the selected upper layer.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Introduce a common config for all 802.15.4 based L2 implementations.
This way, any custom 15.4 L2 implementation will be able to
automatically enable use 15.4 driver, w/o a need to modify the actual
Kconfig.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The print specifier for `atomic_t` should be updated
to `%ld`, `%lu`, or `%lx` to account for the type
change of `atomic_t` to `long`.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
When a frame is sent with a cleared ACK request bit, the transmit
metadata contains a NULL pointer to the ACK frame.
The pointer must not be dereferenced in such case.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
This commit makes nrf5_config_mac_keys function more generic.
Is uses lookup table for storing keys to override. It removes old keys
before storing new ones.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Convert cc2529 driver to `spi_dt_spec` and `gpio_dt_spec`. Required a
whole driver conversion from passing around the driver data struct to
passing around the driver itself.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Convert cc1200 driver to `spi_dt_spec` and `gpio_dt_spec`. Required a
whole driver conversion from passing around the driver data struct to
passing around the driver itself.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
When ack data for extended address is set with the
nrf_802154_ack_data_set function, the extended address
must be reversed to the IEEE 802.15.4 address transmit
order in order to be properly matched.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit aligns the nRF5 ieee802154 driver with the latest
API changes necessary to handle security-related flags properly.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
When stopping the interface, also abort the RX routine and enable RF
power saving. Will re-start RX on iface start.
Also fixed a bug with `cmd_fs` crashing at RF wakeup because `rf_mode`
was allocated on stack.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
