irq_enable() should be called with the composite IRQ code as its
argument, not just the Xtensa proper part of it.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
BT support requires lots of PROVIDE calls that cannot
be added into this linker file. All necessary includes
were moved into hal module to proper handled as needed.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
During configuring the low-voltage power supply of IO pads, the npcx
GPIO driver needs to set the related PORTx_OUT_TYPE bit to 1, i.e.
select to 'Open Drain IO type', also. This CL provides a mechanism that
configuring these bits via 'def-lvol-io-list' node automatically in case
the flag of gpios that have been configured to low-voltage power supply
doesn't contain GPIO_OPEN_DRAIN.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Move the STM32F0 specific ram vector table sections into a dedicated
linker snippet included by the new `SRAM_VECTOR_TABLE` symbol.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add a new Kconfig symbol that explicitly controls whether the vector
table should be placed in RAM. This eliminates the side effect of
`IS_BOOTLOADER` controlling vector table location. Making the condition
a positive assertion also allows the config to be used in CMakeLists
conditions (`zephyr_linker_sources_ifdef()`, etc).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The NPCX power management code gets a compile error if CONFIG_PM is
enabled but CONFIG_ARM_MPU is disabled.
Signed-off-by: Keith Short <keithshort@google.com>
It was found that npcx7 series' GPIOs which support low-voltage power
supply, there is an excessive power consumption if they are selected to
low-voltage mode and their input voltage is 1.8V.
To avoid this excessive power consumption, this CL suspends the
connection between IO pads and hardware instances before ec enters deep
sleep mode. Then restore them after waking up.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Add support for the FVP Base RevC 2xAEMv8A board to be emulated using
the same FVP. For now the virtual platform is only exposing one core and
the basic set of peripherals (GICv3, ARM arch timer, PL011, etc...).
INFO - Total complete: 256/ 256 100% skipped: 933, failed: 0
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The NATIVE_TASK macro uses macros from the toolchain header.
Instead of relaying on the header to be included by somebody else,
include it explicity here.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fixes#29915.
Implements the memory layout and MPU configuration for Ethernet buffers
for STM32H7 controllers as recommended by ST. 16 KB of SRAM3 are
are reserved for this. The first 256 B are for the RX/TX descriptors and
configured as strongly ordered, shareable memory. The rest is for RX/TX
buffers and configured as non cacheable memory. This configuration is
automatically applied for H7 chips if the SRAM3 memory is enabled in the
device tree.
Signed-off-by: Mario Jaun <mario.jaun@gmail.com>
Optionally configure Kconfig SYS_CLOCK_HW_CYCLES_PER_SEC using
clock-frequency provided by dt if sysclk node is enabled
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To allow transition to device tree based clock configuration on
stm32 targets, rework clock_control driver to use intermediate
STM32_ macros initially defined as the equivalent Kconfig macros
for now.
Propagate the change in all code using these macros.
The reason to introduce these new macros instead of configuring
Kconfig flags using dt kconfigfunctions is that we'll need
to be able to inform users that Kconfig flags are deprecated
once the whole family conversion is done, to encourage
out of tree users to adopt this new configuration scheme.
Note: For now STM32H7 series and code is excluded.
This is the same for some series specific code such as
PLL mul/div for L0/L1 and XTRE prescaler on F1 series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This CL adds a override mechanism for pwm module's input clock source
assignment. If the 'clock-bus' property exists, the NPCX_DT_PROP_ENUM_OR
macro function will return an enum upper token value. Otherwise, it
expands to default value in 'clocks' property.
For example, if the users want to select LFCLK as pwm0's input clock,
ths node can be overridden by adding 'clock-bus' property with an enum
string, "NPCX_CLOCK_BUS_LFCLK".
&pwm0 {
status = "okay";
clock-bus = "NPCX_CLOCK_BUS_LFCLK";
};
Signed-off-by: Keith Short <keithshort@google.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Kconfig symbol NFCT_PINS_AS_GPIOS may be defined for all
Nordic nRF SoCs that have the NFCT hardware, so we move
the option definition in nRF common Kconfig file. Also,
we correct the help text to reflect that nRF52 series DKs
and nRF5340 DK have different pins for NFC.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds the soc config for the STM32F031k6 and STM32F031X6.
Add the STM32F031k6 as choice to the Kconfig.soc.
Signed-off-by: Sebastian Schwabe <sebastian-schwabe@gmx.de>
When BT and WiFi coexists, IRAM usage increases a lot.
Add configuration that allow wifi symbols
to be placed in flash, freeing space in IRAM.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add register address including external timer and watchdog(ETWD),
general control(GCTRL), serial peripheral interface(SPI).
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This change enables A, C, D, E, G, H, I, J, K, and L groups,
and fix gpio interrupt function.
This change also pull (and rename) dt-bindings/irq.h to
dt-bindings/interrupt-controller/ite-intc.h, because it is
chip-specific.
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Change-Id: Ifee039981c2cc4cf5980e663702a9921e629fc1e
NPCX host access IRQ enables before entering deep sleep. The pending
bit lets chip wake up from sleep immediately. Clear host access IRQ
pending bit before enabling.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
With some additional macro-magic we can remove the CMake-based header
file template feature, and instead take advantage of the usual
DT_INST_FOREACH_STATUS_OKAY() macro.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Most of the Renesas RCar Gen3 based SoC contains a Cortex R7
processor.
This processor has access to the same memory mapped devices than
the Cortex-A5x cores.
- CPU operates upto 800MHz
- Can use ram area from 0x40040000 to 0x42000000
- Has 512 interrupts on GIC-400 compliant with Arm GICv2
Add support for r8a77951 as first SoC of this series which is also
known as H3 ES2.0 and is present present on different boards such as
Salvator and R-Car Starter Kit(H3ulcb).
This first SoC definition is just enough to print Hello World in a
ram console.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
With some additional macro-magic we can remove the CMake-based header
file template feature, and instead take advantage of the usual
DT_INST_FOREACH_STATUS_OKAY() macro.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
xthal_window_spill call has to be placed into IRAM
in order to allow flash cache disabled operation, otherwise
it will crash.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The bootloader application itself should contain the IVT/DCD
in the header, but the chainable application doesn't.
The ROM_START_OFFSET defaults to 0x400 otherwise the linker
alignment isn't taken into account.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This change allows writing to the flash while running in XIP mode,
and enables mcuboot or NVS settings to be used on i.MX RT socs.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Move the definition of the two IPC RAM blocks from `#define`'s in family
linker scripts to proper devicetree nodes. Use the devicetree nodes to
generate the memory regions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The final else was missing in the if ... else if ... construct.
This commit adds a non-empty else {} to comply with coding
guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
This commit is about the it8xxx2 analog to digital converter
driver. Support 8 channels ch0~ch7 and 10-bit resolution.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Fixed the name of nodes in in espi-vw, miwu-wui, and miwu-int
device-tree node. This CL fixed missing nodes in CL d3a94fa8ab.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
