Added forward declarations of types declared
throughout kernel.h at the start of
kernel.h. With this change it is possible to
include tracing/tracing.h early in kernel.h
and use the tracing functionality in
kernel.h functions without compile errors
which would result if tracing/tracing.h
was included at the end of kernel.h
(type dependencies).
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
Fix Periodic Advertising Synchronize implementation to
generate Synchronization Failed to be Established event
when 6 AUX_SYNC_IND PDUs are not received when establishing
synchronization.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The commit adds Kconfig options that enables "frugal status list";
when enabled, the status list will be sent with zero, empty and false
values omitted, slightly reducing number of bytes sent as response
from device.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit removes mcumgr library, as module, from west.yml
manifest, as the mcumgr library source is now kept within Zephyr
source code tree.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
References to Mynewt have been removed and README for Zephyr has been
merged directly to the README.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit removes MYNEWT sepcific code and code that has been
conditionally compiled with "ifndef _ZEPHYR_".
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit copies code of mcumgr, as a lib, under subsys/mgmt/mcumgr.
Only source files relevant for Zephyr have been copied, and changes
to source files have been limited only to path changes, where
required.
Samples have been left out as the only relevant sample, smp_svr,
is already within Zephyr source tree.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Updates to MEC172x eSPI driver to support ACPI shared
memory region and EC Host Command Subsystem through
ACPI_EC1 and Embedded Memory Interface (EMI).
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Use sys_clock_hw_cycles_per_sec() instead of
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC to determine clock cycles.
Signed-off-by: Michel Haber <michel-haber@hotmail.com>
Updated the Zephyr build process description to include description of
all Zephyr link stages.
It extends the guide with description of the intermediate binaries as
well as the post-processing of those binaries.
- Unfixed size binary
- Fixed size binary
Post-processing
- Partition alignment
- ISR table generation
Build stages images has been updated and new images showing the
post-processing stages of the intermediate binaries has been added.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
With `gen_handles.py` now running on the first pre-built image,
`zephyr_pre0.elf` there is no requirement for the device handle arrays
to remain the same size after processing.
Remove the padding generated in `gen_handles.py`, as well as the
temporary option `CONFIG_DEVICE_HANDLE_PADDING` which was added to work
around this issue.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commit reworks the linker script generation and linking stages in
order to better support fixed section location as required by #38836.
Today we have the following generated linker scripts and the elf output
depending on the system configuration:
- linker_app_smem_unaligned.cmd --> app_smem_unaligned_prebuilt.elf
- linker_zephyr_prebuilt.cmd --> zephyr_prebuilt.elf
- linker.cmd --> zephyr.elf
as not all linker scripts may be created and as there is a need for the
possibility to move gen handles earlier then those stages has been
renamed into more generic names so that with this commit we have:
- linker_zephyr_pre0.cmd --> zephyr_pre0.elf
- linker_zephyr_pre1.cmd --> zephyr_pre1.elf
- linker.cmd --> zephyr.elf
This also means that is the stage zephyr_pre1 is not needed, then build
can go from `zephyr_pre0.elf` to `zephyr.elf`.
The gen_handles.py has been changed so it now uses `zephyr_pre0.elf` as
input. This ensures that the handles array are final when invoking the
next build and linking stages.
To keep the current behavior of generating the isr table and kobj hash
of what was `zephyr_prebuilt` stage the code blocks contolling isr
generation and kobj hash has been relocated to be located after
app_smem and device handle generation.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Introduce a new global property for source files that are generated from
the initial Zephyr link (app_smem_unaligned_prebuilt). This source list
is used for files which will introduce address shifts into the final
binary, which need to be present in `zephyr_prebuilt.elf` for
`CONFIG_USERSPACE` scripts to correctly generate `zephyr.elf`.
This resolves#38836.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The previous description of the `GENERATED_KERNEL_*` cmake variables
was incorrect in that these are generated after the second link stage
when `CONFIG_USERSPACE` is enabled.
The sources in these variables are generated from `zephyr_prebuilt.elf`
for inclusion in `zephyr.elf`. However `zephyr_prebuilt.elf` is preceded
by `app_smem_unaligned_prebuilt.elf` when `CONFIG_USERSPACE` is enabled.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Misc fixes including:
- unique job names
- Change description to mention Bluetooth
- Retry west update
- Use latest unit test publication action
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix cmake warnings for TF-M build system when PSA tests are not enabled.
This produces the following warnings:
"
CMake Warning:
Manually-specified variables were not used by the project:
PSA_TOOLCHAIN_FILE
TOOLCHAIN
"
These warnings can point to cache or config variables being updated in
the TF-M build system so keep this free of warnings.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
DWARF-5 standard replaced the location list (.debug_loc) and range
list (.debug_ranges) sections with new sections (.debug_loclists
and .debug_rnglists).
They weren't handled which resulted in many orphan sections
reported as warnings by linker.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
- Fix the system clock frequency: should be 111.1 MHz instead
of 100 MHz.
- Set ticks per second to 1000 for higher system clock precision.
- Set QEMU icount shift value to 3 so that one instruction gets
executed every 2^3 = 8 ns.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@Weidmueller.com>
Add a state to the bt_iso_cig struct. This makes
checks for the CIG state easier, and follows the
state machine in the core spec.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the validation of specific CIG parameters to its
own function. This is mainly to be able to reuse it for
validationg CIG refconfiguration parameters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Renames the struct from bt_iso_cig_create_param to
bt_iso_cig_param as the same struct can, without
modification, be used to update the CIG as well
(function to support that will come in a later commit).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the verification of the individual cis/bis checks to
an earlier point, because we actually start allocating
resources for the groups.
This removes a double check for NULL, while also
allows us to terminate earlier if there were any
issues.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
A CIG may be updated later to include more CIS, and thus a slist
makes more sense.
The BIG doesn't need the change, but it makes more sense to
have similar handling for both.
This change also removes the requirement that the arrays
used to create the CIG/BIG need to static.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactors all of the on-chip GPIO drivers to use a shared driver class
initialization priority configuration, CONFIG_GPIO_INIT_PRIORITY, to
allow configuring GPIO drivers separately from other devices. This is
similar to other driver classes like I2C and SPI.
Most drivers previously used CONFIG_KERNEL_INIT_PRIORITY_DEFAULT or
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, therefore the default for this new
option is the lower of the two, which means earlier initialization.
Driver-specific options for off-chip I2C- or SPI-based GPIO drivers are
left intact because they often need to be initialized at a different
priority than on-chip GPIO drivers.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
- Add APIs to the `subsys_tracing` group
- Add some missing documentation
- Minor header file style fixes
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Add tracing to the subsys group
- Use `subsys_tracing` "namespace"
- Some minor header style improvements
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
