Replace all existing deprecated API with the recommended alternative.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replace all existing deprecated API with the recommended alternative
for gsm_mux and uart_mux drivers.
Fixes#34103
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Update eSPI buffer to values required per eSPI specification.
Allow applications to override as needed.
Guarantee buffers are not allocated at all if channels are
disabled.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Move the internal structs used by the generic, shared interrupt driver
from the public header file into the implementation file.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This commit is about the it8xxx2 analog to digital converter
driver. Support 8 channels ch0~ch7 and 10-bit resolution.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The ticker 'force' flag is propagated via the ticker elapsed callback,
in order to provide necessary information for collision resolving in the
link layer.
Signed-off-by: Morten Priess <mtpr@oticon.com>
First version of a driver for the st773r LCD controller.
Based on st7789v
Signed-off-by: Kim Bøndergaard <kim@fam-boendergaard.dk>
Signed-off-by: Kim Bøndergaard <kibo@prevas.dk>
If we are building the driver with CONFIG_UART_INTERRUPT_DRIVEN=n
we need to ifdef around the decleration of uart_cmsdk_apb_isr()
or we'll get a compiler warning.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The source clock of the watchdog module is selected to the input of T0
timer, not output. Correct the drawing in case confusing the users.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL adds support for console expired mechanism. It implements the
notification to power management module that the module for console is
in use. If the interval that module doesn't receive any input message
exceeds CONFIG_SOC_POWER_CONSOLE_EXPIRED_TIMEOUT, the power management
module is allowed to enter deep sleep mode. This mechanism gives a
window in which the users can organize console input.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL introduces two configuration options which allows a notification
to the power management module that the UART console module is in use
now. If the interval of console module doesn't receive any input message
exceeds expired timeout, the power management module is allowed to enter
sleep/deep sleep state and turn off the clock of console module.
This mechanism gives a window in which the users can organize input
message if CONFIG_PM is enabled.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
NPCX watchdog driver has a WDT_NPCX_DELAY_CYCLES for delay the watchdog
reset time after the watchdog timeout. For some systems, users would
like to use the watchdog timeout ISR but don't reset the chip
immediately. Let the system have the final chance to ongoing the system
before the real hardware reset time. Removing the watchdog reset
waiting loop in ISR lets users decide whether wait for watchdog reset
by themself.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
As older series supported only 4 different prescaler values the
highest prescaler value was hardcoded. Newer series support 8
programmable prescaler values, therefore take the allowed values from
ll_wwdg header file.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Series STM32G0, STM32G4, STM32H7, STM32L5, STM32WB, STM32WL have
a newer wwdg ip and store the prescaler value not in bits[8:7],
but bits bits[13:11], use the definitions from ll to account for that.
Remove IS_WWDG_PRESCALER, this is not required as the prescaler
is not calculated, but known valid prescaler values are tested until a
valid counter is found.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
1. remove redundant protection on channel status
2. update link interface to support major and minor link
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Modified eeprom shell fill command to be able to fill the complete
eeprom. The code of the fill command is now similar the new eeprom
read command.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Modified eeprom shell read command to be able to read out the complete
eeprom. The code of the read command is now very similar the flash
read command.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
After the commit c1f7b9f45a ("net: l2: ethernet: fix k_work API usage
in carrier on/off handling") each ethernet interface (including DSA
ports) shall first call ethernet_init() before carrier_on_of() function
is called.
As DSA ethernet interfaces (lan{123}) have their own k_work item to
monitor the carrier status (by reading switch IC registers), it was
necessary to move functions, which initialize it after the code which
sets up necessary interfaces (i.e. call ethernet_init(iface)).
In that way the error when accessing uninitialized members of ethernet
context is avoided.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Add a possibility to get values of accelerometer measurement for
all 3 axis of accelerometer with one channel_get().
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Make this driver multi-instance and use the new API.
This commit makes use of some DT macro helpers
In particular:
- get bus devices with DEVICE_DT_GET
- get SPI information with SPI_CONFIG_DT_INST
- get drdy gpios with GPIO_DT_SPEC_GET
Moreover the driver is now using the stmemsc common
routines as requested in issue #33440 and it avoids
the unnecessary declaration of both ctx_i2c and ctx_spi
in the data structure.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Take the int-pin information (i.e. what pin between INT1
and INT2 the drdy is attached to) directly from DT.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The SD Card below Physical Layer 1.10 does not support CMD6.
When usdhc_sd_init is executed, it will fail to exit due to
execution of CMD6, causing the SD Card to not work normally.
For different SD Card Physical Layer specifications,
the following modifications have been made:
Version 1.10 and above support CMD6.
Version 3.0 and above support CMD6 Group 3 (driver strength
and current limit) .
Signed-off-by: Frank Li <lgl88911@163.com>
In a previous commit, a check was added to ensure modem was properly
attached to packet service before initializing PPP. Failure to perform
this check can lead to the dreaded 'NO CARRIER' issue.
While this is a nice idea, the implementation was lacking because when
the check failed, the entire modem initialization procedure was
restarted from square one. For modems/bearers that were slow to attach,
this is potentially disastrous. The proper solution is to loop only the
'AT+CGATT?' part until it succeeds, or fails N times.
This commit implements this looping behavior (using the work queue).
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Fixes the FlexSPI NOR flash driver to register a new log module rather
than declare membership in the FlexSPI controller module, which was
recently moved from drivers/flash to drivers/memc.
This fixes build errors with the mimxrt1064_evk board in:
- samples/drivers/flash_shell
- samples/subsys/fs/littlefs
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Currently the MAX17055 driver assumes that a battery matching the
default characteristics is used.
This change allows battery characteristics to be specified in device
tree and writes them to the MAX17055 on initialization.
Existing default values are maintained for backwards compatibility.
Initialization routine taken from MAX17055 Software Implementation
Guide, document UG6365.
Signed-off-by: Hayden Ball <hayden@playerdata.co.uk>
Initially the flexspi device only supported a flash driver for
external NOR flash. As the controller supports HyperBus devices,
which can be either volatile or non-volatile, the driver iss moved
to drivers/memc.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The file is only really used on STM32 SoCs so we can move the contents
that are relevant into pinmux_stm32.h and remove the file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The STMEMSC HAL i/f requires every driver using it to define
for each instance a stmdev_ctx_t structure, which is used to
export the hardware specific APIs to handle i2c and spi busses
operations. Since this structure is bus agnostic, there is no
need to declare it twice for both i2c and spi. Instead, declare
only one structure, which will be populated either with i2c APIs
or with spi APIs according to where that particular instance is
declared inside the DT.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Make use of the stmemsc i2c/spi read/write routine that
has been introduced to simplify the ST sensor drivers code.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add common i2c/spi read/write routines for the benefit of those
ST sensor drivers who make use of the stmemsc HAL i/f.
Add generic stmemsc_cfg_i2c and stmemsc_cfg_spi structures which
contains all relevant information required by i2c/spi low level
routines, such as:
- the pointer to the bus device
- the I2C slave address (if instance is on I2C bus)
- the spi_config structure (if istance is on SPI bus)
This level of abstraction allows the re-use of the i2c/spi read/write
routines among all stmemsc based sensor driver without the need to
reference the specific sensor data and or config structures.
The STMEMSC HAL source code is located here:
zephyrproject-rtos/modules/hal/st/sensor/stmemsc/
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Enable half transfer interrupt of the dma controller
in case the channel was enabled in circular mode.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
On stm32, the M bits defines the length of the frame between the start
bit and the stop bit, eventually including the parity bit when enabled.
Fix configuration of databits to set correct M bits when parity is
enabled.
This commit tries to address issue zephyrproject-rtos/zephyr#33351
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
Some tools consider this as commented code because of the ifdef, so
remove that and fix a coding guideline violation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
