Update stm32h7 clock_control driver to make use of macros allowing
dts based configuration in coexistance with existing Kconfig method.
Note: Use of IS_ENABLED is removed as it generates warnings in
checkpatch. This checkpatch behavior needs to be reviewed but may
first require a little clean up of IS_ENABLED macro.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Information about which block protect bits are set on power-up is not
inferable from SFDP content, so we need the devicetree config pointer
to get the has-lock property value even when SFDP data is read at
runtime.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
During configuring the low-voltage power supply of IO pads, the npcx
GPIO driver needs to set the related PORTx_OUT_TYPE bit to 1, i.e.
select to 'Open Drain IO type', also. This CL provides a mechanism that
configuring these bits via 'def-lvol-io-list' node automatically in case
the flag of gpios that have been configured to low-voltage power supply
doesn't contain GPIO_OPEN_DRAIN.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
The memory block passed by the user to the i2s_write function is
tightly packed next to each other.
However for 8-bit word_size the I2S hardware expects the data
to be in 2bytes which does not match what is passed by the user.
This will be addressed in a separate PR once the zephyr API committee
finalizes on an I2S API for the user to probe hardware variations.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Update the SDK API's called in the configure implementation.
The DMA_PrepareTransfer and DMA_SubmitTransfer SDK functions
are not recommneded for use. Replaced the call to these SDK
functions with other SDK API's.
2. Fix the implementation the configure function when multiple
blocks are used.
3. Update the dma_reload implementation. The old reload function
would simply abort the transfer. The new implementation reloads
the DMA buffers for transfer.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
To allow transition to device tree based clock configuration on
stm32 targets, rework clock_control driver to use intermediate
STM32_ macros initially defined as the equivalent Kconfig macros
for now.
Propagate the change in all code using these macros.
The reason to introduce these new macros instead of configuring
Kconfig flags using dt kconfigfunctions is that we'll need
to be able to inform users that Kconfig flags are deprecated
once the whole family conversion is done, to encourage
out of tree users to adopt this new configuration scheme.
Note: For now STM32H7 series and code is excluded.
This is the same for some series specific code such as
PLL mul/div for L0/L1 and XTRE prescaler on F1 series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add configurable attached event delay. Delay can be used to give
USB Charging Controller time for initialization.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
LL_RCC_HSE_EnableBypass() doesn't exist on stm32wl,
but can be replaced by LL_RCC_HSE_EnableTcxo()
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Use recently introduced API, which takes care of gracefully closing any
pending DNS requests and replacing existing DNS server list with new
one.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use recently introduced API, which takes care of gracefully closing any
pending DNS requests and replacing existing DNS server list with new
one.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reboot functionality has nothing to do with PM, so move it out to the
subsys/os folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Limit the maximum SPI frequency to that supported by the instance
hardware. This stops peripherals supporting >8MHz on slow instances
from wrapping around on the clock frequency for undefined behaviour.
Fixes#34402
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
