Now that SPI drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a
sensor and not respect the devicetree state of the SPI.
Additionally we can get problems with prj.conf/defconfig
getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that serial drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a
sensor and not respect the devicetree state of the serial.
Additionally we can get problems with prj.conf/defconfig
getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that gpio drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a
sensor and not respect the devicetree state of the GPIO.
Additionally we can get problems with prj.conf/defconfig
getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
Linker files were not migrated with the new <zephyr/...> prefix. Note
that the conversion has been scripted, refer to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all soc code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The autoconf.h header is not required because the definitions present in
the file are exposed using the compiler `-imacros` flag.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Aligning with the rest of PM API, replace pm_power_state_exit_post_ops
with pm_state_exit_post_ops.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Many ARM SoCs included <devicetree.h> likely due to:
1. nvic.h not being self-contained
2. As a result of copy-paste
Some RISC-V SoCs had the same problem, in this case likely due to
copy-paste from ARM. The <devicetree.h> header has been removed using
the following command:
sed -i ':a;N;$!ba;s/#include <devicetree\.h>\n//g' soc/**/soc.h
soc.h files that make a legitimate usage of the API have not been
changed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Define SoC hooks as weak symbols so this way applications can
overwritten them defining strong symbols.
The problem is that currently SoCs are defining these interfaces as
strong symbol inhibiting the possibility of applications bring their
own implementation.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Hex firmware file is flashed by default if JLink is used. Since all
of the SiLabs dev boards have an on-board JLink, enable generating hex
file.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Change subsystem to use struct pm_state with substate-id instead of
using only the power state category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Migrate the whole pm subsystem to use new power states information
from power_state.h and get states and residency properties from
device tree.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
All other silabs_exx32 socs already have this change applied, only
efr32bg13p was missing. This is now done, so all silabs_exx32 are
similar.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Leftover from old renaming commits. This function is not private and
should not start with underscore.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This defines the TRNG for EFM32GG11 and enables it for trng0
in the dts for the matching development kits.
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
The WGM160P module combines the WF200 Wi-Fi transceiver with
an EFM32GG11 MCU
This code is based on the efm32gg_stk3701a board definitions
Signed-off-by: Thorvald Natvig <thorvald@natvig.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This file is setting Kconfig options even when it is not the chosen
SoC. I noticed this because without this patch, CONFIG_SOC_GECKO_EMU=y
when building for an unrelated board with SYS_POWER_MANAGEMENT=y.
Hide any subtrees in this file when the EXX32 family isn't selected.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Some parameters (e.g., tuning capacitors) can be configured in the
CMU_HFXOInit_TypeDef and CMU_LFXOInit_TypeDef structures before calling
CMU_HFXOInit() and CMU_LFXOInit() during clock initialisation.
Signed-off-by: Steven Lemaire <steven.lemaire@zii.aero>
This commit fixes Cortex-M header inclusions from the deprecated paths.
The Cortex-M headers were relocated from `include/arch/arm/cortex_m` to
`include/arch/arm/aarch32/cortex_m` by the refactoring done in the
commit d048faacf2.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Replace DT_CPU_CLOCK_FREQUENCY with a PATH based reference to cpu@0
(DT_PATH(cpus, cpu_0)) and than getting the clock_frequency property:
DT_CPU_CLOCK_FREQUENCY -> DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency)
This lets us remove DT_CPU_CLOCK_FREQUENCY from dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change DT_GPIO_GECKO_SWO_LOCATION to use new DT_INST and DT_PROP macros
and remove defining it in dts_fixup.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We don't need to define DT_NUM_IRQ_PRIO_BITS or DT_NUM_MPU_REGIONS in
dts_fixup.h files anymore, so we can remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace CONFIG_ENTROPY_NAME with DT_CHOSEN_ZEPHYR_ENTROPY_LABEL. We now
set zephyr,entropy in the chosen node of the device tree to the entropy
device.
This allows us to remove CONFIG_ENTROPY_NAME from dts_fixup.h. Also
remove any other stale ENTROPY related defines in dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert the driver to use DT_INST_ defines, update all dependent dts,
soc and board files.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
