Add a fixed clock to the qemu-virt-a53.dtsi to match how the musca dts
files work so we get the clock DT info in the same way in the driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
OT revision was by mistake set to a wrong commit. Now it should
point to the latest merge commit (up to the upstream commit ab9c0a4).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rework the assembly code for the ISR wrapper and SVC to share the
entry/exit code that is currently scattered amoung several files /
places. No functional changes.
Rename also macro.h -> macro.inc to fool the CI.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
When using BT_LE_ADV_NCONN_NAME then the advertising name will not be
included in the advertising data. This is because the host always puts
the device name in the scan response. But since the scan data was
otherwise empty the advertising type was set to ADV_NONCONN_IND.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We add a note in k_cpu_idle() documentation, stressing that for
certain architectures. the function unmasks interrupts
unconditionally before returning. In the
documentation of the architecture-specific API (arch_cpu_idle)
we describe the expected behavior with regards to the wake-up
event.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
k_cpu_idle() API does not need to be invoked with interrupts
unlocked; it is actually invoked with interrupts locked by
the kernel CPU idling mechanism. In most architectures, the
function is, actually, un-locking interrupts itself. We need
to remove this comment from the documentation of the CPU
idle API. We add a note about the un-locking of interrupts.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
z_CpuIdleInit has been renamed to z_arm_cpu_idle_init, so
we need to correct that function's name in the documentation
of arch_cpu_atomic_idle.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds the required memory barriers to the `arch_cpu_idle`
function in order to ensure proper idle operation in all cases.
1. Add ISB after setting BASEPRI to ensure that the new wake-up
interrupt priority is visible to the WFI instruction.
2. Add DSB before WFI to ensure that all memory transactions are
completed before going to sleep.
3. Add ISB after CPSIE to ensure that the pending wake-up interrupt
is serviced immediately.
Co-authored-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The current AArch32 `arch_cpu_idle` implementation enables interrupt
before executing the WFI instruction, and this has the side effect of
allowing interruption and thereby calling wake-up notification
functions before the CPU enters sleep.
This commit fixes the problem described above by ensuring that
interrupt is disabled when the WFI instruction is executed and
re-enabled only after the processor wakes up.
For ARMv6-M, ARMv8-M Baseline and ARM-R, the PRIMASK (ARM-M)/
CPSR.I (ARM-R) is used to lock interrupts and therefore it is not
necessary to do anything before executing the WFI instruction.
For ARMv7-M and ARMv8-M Mainline, the BASEPRI is used to lock
interrupts and the PRIMASK is always cleared in non-interrupt context;
therefore, it is necessary to set the PRIMASK to mask interrupts,
before clearing the BASEPRI to configure wake-up interrupt priority to
the lowest.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Splits PB-ADV and PB-GATT into separate modules with a common interface
to modularize prov.c.
Additional trivial fixes from testing:
- Reduces warnings for normal occurances like repeated packets.
- Makes link ack a non-reliable packet to prevent it from being repeated
until prov invite.
- Provisioner does not send link fail, but closes the link (as per spec
section 5.4.4). This prevents lingering zombie links on both sides.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add interface name to link up/down information message
to help tracking which port is changing status.
Signed-off-by: Armand Ciejak <armandciejak@users.noreply.github.com>
Copy paste error, base address of second controller was set to the
same as the first one, corrected to ENET2.
Signed-off-by: Armand Ciejak <armandciejak@users.noreply.github.com>
With Ethernet controller base address is not straight forward
to figure out if it is ENET or ENET2l, using name is much better.
Signed-off-by: Armand Ciejak <armandciejak@users.noreply.github.com>
These boards have a SoC with 2 Ethernet controllers but the second
controller it is not wired.
Signed-off-by: Armand Ciejak <armandciejak@users.noreply.github.com>
This will allow having a different PHY address for each controller.
It also avoids for the PHY address to be hard-coded in several
functions.
Signed-off-by: Armand Ciejak <armandciejak@users.noreply.github.com>
Add new config allowing to enable the second Ethernet port
on i.MX RT1060 SoC family.
Signed-off-by: Armand Ciejak <armandciejak@users.noreply.github.com>
Source and destination ports should be set properly
when assembling the receive socket data.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Using zephyr_target_property::FLASH_DEPENDENCIES to fetch additional
dependencies to the flash operation.
The properties are fetched using a generator expression which allows
users of Zephyr to add dependencies both before and after the flash
target has been defined.
Dependencies can be other targets that must be build / custom commands
which must be executed before the flash operation. Or it can be targets
which must be built.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Haakon Oeye Amundsen <haakon.amundsen@nordicsemi.no>
Tests were added for the UART configure API in #22849. The existing test
implementation works, but suggested to reduce dependency between test
cases. This commit allows each test to run independently of each other
by removing the function call of uart_config_get() in the
uart_configure() test case, and uses the uart_config_get() test case to
confirm the value set and gotten/read.
Fixes#23459
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Coverity doesn't invoke the build for this module with a configuration
that provides a non-zero delay for entering or releasing deep power
down, so it sees a check that a value known to be non-negative
magically became negative without being touched, and so screams about
dead code.
Refactor to make the adjustments unconditional which has the same
effect in any reasonable level of optimization while making it
slightly less obvious that the value may not change.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
IP ethernet switch board includes K66F MCU from NXP
and Micrel/Microchip KSZ8794CNX switch. Board support
includes basic GPIO LED and common functions.
Switch function needs support either based on DSA or
relative feature in Zephyr which is tracked with issue
22061.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Rename the clock defines from k64 to K6X. This allows
inclusion of K66 series MCU's support without much
re-defines. Clock divider defaults to K64 series.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Add entropy driver based on GECKO TRNG module along with device
tree support for EFM32PG and EFR32MG SOCs.
Signed-off-by: Pooja Karanjekar <pooja.karanjekar@lemonbeat.com>
This reverts commit 974aa3add4.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This reverts commit 8739517107.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This reverts commit 979ed4e1cd.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This reverts commit 39d5827e97.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This reverts commit 36f199160b.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Temporary point mcuboot to JuulLabs-OSS/mcuboot#682
to check if mcuboot can be upgraded.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
There's a circular dependency with hal_nordic while
merging build assert macros.
Point hal_nordic to PR where the changes are present
so that CI can proceed.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Add a missing include of debug/stack.h in order to fix the
compilation warning on implicit declaration of log_stack_usage().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to de-duplicate 2 macros with the same use,
merge BUILD_ASSERT(), BUILD_ASSERT_MSG() into one macro.
Make BUILD_ASSERT_MSG() deprecated.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Split up requirements.txt into several files so that CI tools can
utilize/reference the specific requirements-<FOO>.txt they may need
while keep things in sync with the development. This is to reduce
both time and amount of work CI actions due to python package install.
Create the following groupings:
1. BASE - needed to build or create zephyr images
2. BUILD-TEST - need to run compile/build tests
3. DOC - need to build the docs
4. RUN-TEST - need for runtime testing
5. EXTRAS - optional or useful for development/developers workflow
Also tried to add a comment about what or why a given package is being
pulled in for.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
