Add csi_22pins_connector and related label in order to use
shields relying on csi_pins_connector.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Add configuration of the IC17 and IC18 clock dividers, used
by the dcmipp and csi IPs in the stm32n6.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Add weak functions and their call within the dcmipp driver so that
externally provided ISP control functions can be called by the
driver at right timing in order to perform the control of the
ISP part of the DCMIPP.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
The STM32 Digital Camera Memory Interface Pixel Processor (DCMIPP)
is a multi-pipeline camera interface allowing to capture
and process frames from parallel or CSI interfaces depending on its
version.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Initial driver for the icm40627 from Invensense/TDK, a 6-axis
accelerometer with gyroscope and temperature sensing capabilities.
Signed-off-by: Florijan Plohl <florijan.plohl@norik.com>
If `CONFIG_SYS_CLOCK_EXISTS=n`, then
`CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC` will likely not be defined at all.
Fix the compilation by moving the check for it being `== 0` to a
separate preprocessor #if statement.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The EC timer runs at 9.2 MHz, which leads to a non-integer number of
ticks per microsecond. This causes slight overestimation when delays
are computed using whole ticks (e.g., using 10 ticks for 1 µs).
To address this, the busy wait calculation is adjusted with a
compensation factor to minimize cumulative timing error over time.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
In case of extended advertising, advertising data can be reported in
parts, so we shouldn't discard them.
Instead, only discard the legacy advertising reports.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Updated the tester README with configuration options required to
build with support for btsnoop and SEGGER RTT log backends. This
helps developers capture logs for debugging and analysis during
Bluetooth testing.
Signed-off-by: Szymon Czapracki <szymon.czapracki@codecoup.pl>
Add a compliance check that allows to flag when a given file requires a
Python version higher than 3.10 (minimum supported version in Zephyr at
the time of writing) since not all Python scripts are tested against
3.10 in CI and we want to avoid introducing changes that could break
users.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The typical way of calling INPUTMUX_AttachSignal() is to
bracket it around INPUTMUX_Init() and INPUTMUX_Deinit()
calls because we can reduce power consumption by not
keeping the interface powered when not changing INPUTMUX.
This driver was violating that convention, which caused
it to not coexist well with other code that followed the
usage convention because the INPUTMUX might be initialized
or not depending on execution order with the other modules.
Signed-off-by: Mike J. Chen <mjchen@google.com>
Add select for GEN_HANDLERS to use the more efficient
generated interrupt handlers.
Add select for HIFI3, which are the SIMD related registers.
Signed-off-by: Mike J. Chen <mjchen@google.com>
This patch introduces handling for the target reset request (RSTACT)
in the I3C controller.
It enables the controller to send a broadcast RSTACT command along with
the target reset pattern in a single frame.
Signed-off-by: Alvis Sun <yfsun@nuvoton.com>
This patch makes cosmetic changes to cavs/power.c by updating comments to
Doxygen style, fixing typos.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This patch makes cosmetic changes to ace/power.c by updating comments to
Doxygen style, fixing typos, and removing an extraneous character for
improved readability and consistency.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This patch enhances the power management capabilities of the Intel ADSP
by ensuring that power gating states are appropriately managed based on
core activity. It prevents the primary core from entering power gating
if secondary cores are active and re-enables power gating when all
secondary cores are off, using pm_policy_state_lock_get and
pm_policy_state_lock_put functions.
The Sound Open Firmware (SOF) project currently uses a custom power
management policy to achieve these effects. With this patch, the default
power management policy can be utilized, allowing the option to disable
the custom policy while maintaining system reliability and performance
across different core states.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Remove static struct modifier from SPSC_DECLARE macro.
This solves a warning emitted when compiling for native_sim.
Signed-off-by: Luca Arato <luca.arato@secomind.com>
Introduce work timeout, which is an optional workqueue configuration
which enables monitoring for work items which take longer than
expected. This could be due to long running or deadlocked handlers.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
This patch adds the ADC driver for TI K3 family of SoCs. Technical
reference can be found in the Technical Reference Manual (TRM) of the
board.
Signed-off-by: Amneesh Singh <a-singh7@ti.com>
Exclude the stm32h7 target boards to this samples/subsys/settings
because it does not apply for flash sector flash size larger
than 64K : all those stm32h7 mcu have sector size of 128K
The settings_subsys_init will fails (-33 DOM errno ) when it checks
nvs_sector_size > UINT16_MAX in settings_backend_init()
of the subsys/settings/src/settings_nvs.c
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Support for list of images in build info was added with commit
4061311da3 and is used by sysbuild.
Zephyr itself also uses CMake's External Project feature when including
TF-M or TF-A in a Zephyr build.
Populate build info with TF-M / TF-A information when said image is
included in the build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add support OSPI for Renesas ek_ra8m1, ek_ra8d1 to run sample
spi_flash
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Signed-off-by: Tri Nguyen <tri.nguyen.wj@bp.renesas.com>
Signed-off-by: Thao Luong <thao.luong.uw@renesas.com>
Add support OSPI for Renesas ek_ra8m1, ek_ra8d1 to run
sample jesd216
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Signed-off-by: Tri Nguyen <tri.nguyen.wj@bp.renesas.com>
Signed-off-by: Thao Luong <thao.luong.uw@renesas.com>
Support OSPI flash driver on EK-RA8M1 and EK-RA8D1 with ospi_b
and S28HL512T flash.
Signed-off-by: Tri Nguyen <tri.nguyen.wj@bp.renesas.com>
Signed-off-by: Thao Luong <thao.luong.uw@renesas.com>
Ensure that the order of properties in the output DTS file matches the
order in which they are defined in the DTS source files by moving props
to the end of the dictionary when they are accessed.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Split long arrays into multiple lines to improve readability of the
output DTS file. A new line is started when the array data exceeds
80 characters.
Add a few test entries to verify the new behavior.
Note: the F821 linter suppression prevents flagging 'array_start' and
'array_newline' as undefined variables. This is because these variables
are initialized when an opening brace is output, which is necessarily
before any element in a byte or prop array. A sequence of markers not
following this pattern would indicate a bug in the DTS parsing code.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The application or drivers can request the LFCLK with a given
precision and accuracy.
The driver should select the clock source which has
the lowest power consumption and still satisfies the requested
accuracy and precision.
Before this commit, this was not the case.
Consider the case where the BICR has configured the system
to have LFXO with accuracy of 20 ppm.
The existing code would have ordered the clock options as following:
```
[0] = {LFLPRC, 1000 ppm},
[1] = {LFRC, 500 ppm},
[2] = {SYNTH, 30 ppm},
[3] = {LFXO_PIERCE, 20 ppm},
[4] = {LFXO_PIERCE_HP, 20 ppm}
```
**Example 1**: The user requests the clock with an accuracy of 30 ppm.
The existing code would request the power hungry "SYNTH".
**Example 2**: The user requests a clock with an accuracy of 500 ppm.
The existing code would request the LFRC which consumes more power than
the LFXO.
This commit fixes this issue by ordering the clock sources according
to power consumption.
For the examples above we user request would result in requesting the
20 ppm LFXO.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
