Stores a magic value togetter with the counter value, and resets the
counter in case that magic does not match.
A small magic value is not ideal, but should be good enough for the
sample and avoids pulling in a additional dependency e.g. on crc.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit moves the backup sram definition to the
series base dtsi file, the size is overwritten for socs
which have a bigger bkpsram.
The backup SRAM is available on all stm32h5 mcus.
stm32h503/523/533 have 2k
stm32h562/563/573 have 4k
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Also fixed a couple invalid or missing table of contents to have
proper document hierarchy.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
On stm32h735g_disco, `arduino_gpio` is declared while the connector is not
actually described.
On stm32h750b_dk, connector description was simply not included.
All these are blocking tests trying to make profit of arduino gpio
connectors.
Fix these.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Rename `BT_CONN_AUTO_FEATURE_EXCH` to `BT_CONN_LE_FEATURES_EXCHANGED`,
and add some comments for readability.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
When using the it8xxx2bx chip, because the SRAM size is 60k and
not a power of 2, using (CONFIG_SRAM_SIZE - 1) results in an
incorrect value for the h2ram base address mask.
Therefore, the mask is declared as GEMASK(19, 0) here.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
DMA_INTEL_ADSP_HDA_TIMING_L1_EXIT should be set by default
for all Intel ACE platforms
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Tmr and dtmr drivers were missing a flag which tells the
counter_is_conting_up function that the counter is counting up. So I've
added the flag
Signed-off-by: Krystof Sadlik <krystof.sadlik@nxp.com>
If CONFIG_LOG_BACKEND_SHOW_COLOR is disabled, error and warning
lines are still being outputted with color, which is contrary to
what the Kconfig says. So change the color settings for error
and warning lines to no color if this Kconfig is disabled.
The log_output test is also amended to account for this.
Though the test is not skipped as no color is still some colors
(... well... maybe).
Fixes#77150
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
- Update the wrong value of xtal frequency on EK-RA6M1
- Update documentation of EK-RA6M2 regarding to clock description
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
The samples had a _iso suffix, but the other ISO samples
prefix iso_.
Renames the central and peripheral sample so that they
prefix iso_ rather than suffix _iso.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Due to it is a normal firmware downloading sequence,
it should be a debug log instead of error log.
Change LOG_ERR to LOG_DBG for this case.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The way ESP32 XIP works (with MMU and cache) does no fit the way Zephyr XIP
is implemented, causing issues related to included Zephyr linker files.
Flash code still resides in flash for execution, but MMU/Cache handles it
in such way that XIP might not (or should not) be used with current Zephyr
approach. To address this problem, XIP configuration option is being
removed from Espressif targets.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Several BSIM tests did not enable -RealEncryption=1.
Since everything in LE Audio effectively requires encryption,
we should enable it, as we have seen a few tests passing before
that shouldn't, because they didn't set -RealEncryption=1.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With commit ad242b9, the buffer size was made configurable. Hence, the
corresponding definition CONFIG_SAMPLE_BUFFER_SIZE has to be used when
filling and displaying the buffer.
Signed-off-by: Joerg Hofrichter <joerg.hofrichter@ni.com>
Enable central HR peripheral HR samples for nrf54l15bsim.
RealEncryption is BabbleSIM is not enabled as nRF54L port
in Zephyr Controller is not yet supported and the test is
also not using security (SMP pairing).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use SW_SWITCH_SINGLE_TIMER for nRF54Lx so that fast ramp
can be used, and hence support assymmetric PHYs in ACL
connections.
nRF54Lx radio domain does not have second timer instance
to efficiently implement software switch unless a second
time is used from a different power domain needed use of
PPIB for the double buffered switch timer compares.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use NRF_GRTC, Global real-time counter, instead of NRF_RTC.
NRF_GRTC is present in a different power domain in the SoC.
Also, NRF_GRTC provide microsecond resolution timing units,
in the future use of NRF_TIMER for packet timer can also be
replaced.
Use of NRF_RTC would keep Radio power domain ON in addition
to already ON NRF_GRTC's power domain, hence switch to using
NRF_GRTC on nRF54Lx SoC to have lower power consumptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
nRF54Lx have updated Data Whitening register settings, add
implementation to correctly set them up.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor sw_switch hal interface use and document why some
PPI/DPPI channel group related subscriptions are not
disabled explicitly.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix software tIFS switching using single timer from
triggering spurious TXEN/RXEN if the first remainder is
shorter than the tIFS delay calculated in the sw_switch()
function.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
