Remove deprecated functions in the previous release. Note that PM API is
not marked as stable.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Aligning with the rest of PM API, replace pm_power_state_exit_post_ops
with pm_state_exit_post_ops.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix Periodic Advertising PDU ACAD set and clear interface to
support updating ACAD when previous and new PDU buffer are
same (i.e. when previous new PDU not consumed yet by LLL).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update implementation to have assertion when not finding the
Channel Map Update Indication field in ACAD.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In case an individual resource is being discovered, the LwM2M client
should not only fill the attributes assinged at the resource level, but
also the ones inherited from the object and object instance levels.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M 1.1 allows to write attributes for resource instances as well.
Resource instance level attributes need also to be taken into
consideration when adding/updating observers.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M adds Resource Instance reporting in Discovery response, along with
attributes assinged at the Resource Instance level.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Peer may send a zero-length keepalive message, probing the recv window
size - TCP stack should still reply for such packets, otherwise
connection will stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add implementation of net_tcp_update_recv_wnd() function.
Move the window deacreasing code to the tcp module - receive window
has to be decreased before sending ACK, which was not possible when
window was decreased in the receive callback function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move the unittest.cmake to the new Zephyr CMake modules dir.
This allows us to have a single Zephyr CMake package and load unittest
module as: 'find_package(Zephyr COMPONENTS unittest)'
This unifies the way Zephyr package is sourced and removes the need for
a dedicated ZephyrUnittest package.
Deprecate the use of: 'find_package(ZephyrUnittest)'
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
If OPENTHREAD_IP6_FRAGM is enabled the IPv6 fragments are handled in
OpenThread stack but also forwarder unconditionally to the Zephyr
uplayers. It causes additional packets processing and leads to errors
like unrecognized next header type or duplicate ping reply. What more
these errors generate additional traffic which jam channel and decrease
latency for packets required fragmentation.
This commit add filtering IPv6 fragments when data fragmentation and
reassembling is enabled in OpenThread.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Uninitialized memory would report wrong value for
`mAckedWithSecEnhAck` flag in the received frame, making the
OpenThread stack to update the frame counter for the neighbor
wrongly.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
When immediate logging is used and optimization is off then bigger
stack is needed for thread analyzer. Adjusting the value.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Logging v2 is utilizing complex preprocessing operations to
prepare message at compile time. Multiple operations are peformed
on log message arguments. However, it is expected that argument
will be evaluated only once (e.g. it can be a call to a function
with side effects). Adding additional layer which creates copies
of user arguments on stack and passes them to further processing.
Updated test for log_msg2 which is using internal macro which
got renamed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Always use runtime packaging in immediate mode. Removing attempt to
package on stack if possible. It would be done only to speed up
logging but that is not a requirement in immediate mode where
packaging time is fractional compared to backend processing. Using
runtime packaging also reduces stack usage in the context which calls
log message.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The commit adds FS_FATFS_MAX_ROOT_ENTRIES Kconfig option that allows
to select number of root node entries that will be allocated while
creating FAT file system on a device.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit removes redundant memcpy operations and switches from
using TinyCBOR provided byte order converters to sys_be, native
to Zephyr.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
When system clock is set globally for the test which is executed
on various qemu platforms it may happen that clock is set too
high compared to CPU clock frequency. In that case test may stuck.
Added check and test skipping in that case.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Updated log_core to use spin lock instead of irq_lock.
Refactored z_log_msg_post_finalize function.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This is a bare minimal changes to tell the server that we are using
LwM2M 1.1 version. Queue-mode parameter has changed between 1.0 and
1.1 so it must be changed in the same time.
Other 1.1 features may follow on separate commits. This is still
an experimental feature that allows developing and testing of
1.1 features.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
LE Audio builds on top of the BT Host stack, and will
thus require a higher amount of stack size. Even simple
applications using BAP will likely reach the 1024 default
size with the default BAP configurations, and when
we start adding CAP and even TMAP/HAP on top of it, it
will likely increase even further.
The default value of 2048 is unlikely to be reached,
and applications that want to optimize can likely
reduce it, depending on the configuration.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This far time values have been synonymous to integer values. Content
formats like CBOR do use different representation.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
As use for simple message with no-segment send or receive.
This will be useful for ram-resource-constrained device.
such as bbc-microbit-v1.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Remove the BT_AUDIO_DEBUG Kconfig option.
Given that all the audio modules are guarded by the BT_AUDIO config,
it seems excessive to also have a separate guard for audio module
debug. It is sufficient that this is turned on/off module by module.
Note that the BT_AUDIO_DEBUG was also located in the wrong file - the
babs Kconfig file, not the main Kconfig file.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Remove the check for BT_AUDIO from the Kconfig files that had it, for
consistency (some files did not have it).
This check is not required - all Kconfig.* files are sourced from the
main Kconfig file _only_ if BT_AUDIO has been configured. As long as
this is the case, it is not required to check in the files themselves.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Added support for Portfolio object support because LwM2M v1.1 conformance
test requirement that. This object is only for conformance test purposing.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Before this change, enabling CONFIG_BT_SETTINGS and calling
settings_load(), but delaying / not calling bt_enable would trigger an
assertion error due to a timeout. The fault is that the settings load
handler for the Bluetooth host assumes bt_enable has already been called
and sends HCI commands to the controller. This times out if HCI is not
running.
The fix is to skip loading Bluetooth settings before bt_enable. The doc
is updated to guide the user on how to enable Bluetooth after settings
have been loaded before.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
- Prevent double callback with ADV re-scheduling
For configurations using CONFIG_BT_CTLR_JIT_SCHEDULING, when last
ADV before initiating connection is re-scheduled with a small delay,
the disabled_cb would be called a second time. This would unexpectedly
invoke a second conn setup with illegal parameters.
To avoid this JIT scheduler phenomenon, clear the ADV disabled_cb
when invoked.
- Add priority to LLL header. This allows the conn priority to be
associated with the object. Used in vendor LLL implementation.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Do not retransmit a message that just has been send successfully.
This case can in particular happen quite frequently if the modem
connection/throughput is quite bad and so there is a high latency.
A message that has to be acknowledged is scheduled for retransmission.
Before retransmission a ack for this message is received that will
cause a reset of the original message. In this case you see a
"LwM2M message is invalid" error message.
Signed-off-by: Andreas Chmielewski <andreas.chmielewski@grandcentrix.net>
After PR: https://github.com/zephyrproject-rtos/zephyr/pull/38296
If we receive the second recovery after 192 hours after the first
recovery, we may still not be able to perform any recovery, even
if the IV Index differs by 42, because the `ivi_was_recovered` flag
will only be cleared during the iv update.
But still May lose iv update, as we did the first iv recovery.
This patch by checking the iv duration, if 192h later, auto clear
`ivi_was_recovered` flag.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Read operation must return empty payload when read /object_id
if there is no created object instances.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
