Extended logging v2 to support frontend api. Contrary to v1,
it is possible to have frontend and backends in the system.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Rename
BT_CTLR_LLCP_PROC_CTX_BUF_NUM
to
BT_CTLR_LLCP_LOCAL_PROC_CTX_BUF_NUM
to match naming scheme of
BT_CTLR_LLCP_REMOTE_PROC_CTX_BUF_NUM
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Add a separate procedure context pool for remote initiated procedures.
Make it configurable in size by BT_CTLR_LLCP_REMOTE_PROC_CTX_BUF_NUM.
Fix all unit tests referring to the amount of free context buffers.
Fixes#41823
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Move the mem_pool structure to the internal header for wider access.
Introduce a mem_pool owner in the proc_ctx, sch that multiple mem_pool
could be used for memory management of proc_ctx, also static 'foreign'
allocated proc_ctx would be supported by this.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
When padding is added to "fill" the gap in order to wrap to the
beginning of the ring buffer, such padding is attributed to the
current item being added. Let's attribute it to the previous entry
instead so it'll be freed along with that entry and make the space
available one entry sooner, increasing the chances for keeping the
current entry around longer.
If ring buffer is empty then always reset it up front to get best
alignment right away i.e. beginning of buffer.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The `handle_signal()` function in the new ztest API (`ztest_new.c`) uses
an array of strings to lookup a friendly name for each test phase, but
the array only has three elements despite there being six test phases.
This can lead to an out-of-bounds issue. Replace the array with a helper
function and switch statement.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Start of the antenna switching and sampling CTE is configured by use
of DFECTRL2 register in Nodric Radio peripheral. As of now the
configuration was set to defaults, so antenna switching has started
immediately after CTE procedure was started (end of CRC).
Sampling was started at the very beginning of a sampling slot.
It should be delayed for at least 125 ns from beginning of sampling
slot and not more than 125 ns to the end of sampling slot. This is a
requirement from BT 5.3 Core specification Vol 6, Part B section 2.5.4
IQ sampling.
Although it seems to me that when samples are taken depends on
implementation and used hardware. Taking that into account
there is provided a set of KConfig options to configure samples
offset for PHY 1M, PHY 2M and sapling slots 1 us and 2us separetely.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
If there is enabled support for ADI in periodic advertising and
periodic advertising uses chained PDUs there is an assert when
periodic advertising is re-enabled.
There is missing a code that will set a chain for PDU with
updated ADI field.
The commit fixes the issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
SenML Json support dynamical basename for composite operation.
Changes simplify base name generation and compres message better.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Added new flags to packaging API:
- CBPRINTF_PACKAGE_ADD_RO_STR_IDXS - when set, read-only string
locations are appended to the package
- CBPRINTF_PACKAGE_ADD_RW_STR_IDXS - when set, read-write string
locations are appended to the package (instead of appending actual
strings)
- CBPRINTF_PACKAGE_FIRST_RO_STR_CNT(n) - indicate that n first strings
are known to be read only. Ignored in runtime packaging.
Add function for copying packages with optional appending strings.
Changed CBPRINTF_MUST_RUNTIME_PACKAGE to use same flags as packaging.
Aligned logging and test to those changes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The entropy device reference can be obtained at compile time. Adjust
error code to -ENODEV.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
THe entropy device can be ontained at compile time. Simplify some
logs/code as a result. Also adjusted "entropy_driver" name to
"entropy_dev", since it holds a "device", not a "driver".
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The entropy device can be obtained at compile time. Adjusted the
assertion message slightly, as it no longer uses the entropy macro
label. Also adjusted the entropy_driver variable to entropy_dev, since
it does not hold a "driver" but a "device".
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device can be obtained at compile time. Note that now the readiness
is checked on every call, but it's a fast operation anyway.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Refactor the PAC location read and write. Instead
of storing the location in the service, the
location is now stored in the application, and
is retrieved by the service via callbacks.
Similarly, if a client writes the location, this
request is being sent to the application.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a sent callback that is used to notify applications
using the audio API when a SDU has been sent over HCI.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
ot_setting_delete_subtree returns the information if the subtree
had been found in the persistent storage or not before removing.
This has matter for otPlatSettingsGet. In other uses cases
the return value shoud be ignored.
The right place for the check if deletion succeded is in
settings_load_subtree_direct and its callback.
Currently "ot factoryreset" causes an assert if there is no
OpenThread dataset stored in the persistent memory.
This PR fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Changes ERR to WARN message when relay buffers
run out, as this is not really an error but a
consequence of high traffic.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Whenever a stream is attached to an endpoint, the
stream's operation callbacks will be called for the
unicast server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The os_mgmt_echo is supposed to return MGMT type error not
Cbor; there was missing translation.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The cbor_value_advance at the end of attribute parsing loop could
overwrite err with 0; this could cause loop to fail to break
on error and make cbor_internal_read_object return success, even
if parsing of input buffer failed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
As the receive window is now decreased at the TCP module level, other
direct net_context users are also responsible for acknowledging the
received data with net_context_update_recv_wnd() - otherwise, the
communication will stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This patch fixes ISO data path setup that shall be done for enabled
directions only and removes usage of Path ID = 0xFF which is RFU value.
As per Core 5.3 Vol 4, Part E, 7.8.109
"If the Host attempts to set an output data path using a connection handle
that is for an Isochronous Broadcaster, for an input data path on a
Synchronized Receiver, or for a data path for the direction on a
unidirectional CIS where BN is set to 0, the Controller shall return the
error code Command Disallowed (0x0C)."
Fixes: #43190
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The capabilities callback did not provide information about
the type of the endpoint being configured, making it
impossible for the application to determine if it is a
sink or source endpoint.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The unicast client would set the QoS reversed, as the
client should configure it TX parameters for SINK
and RX parameters for source, where it did it the other
way around.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove functions and and macro uses that otherwise
determined the direction of an audio stream, and instead
use the direction (dir) field of the endpoint instead.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Audio streams as defined by the BAP spec does not
support bidirectional audio streams. This commit
updates the API and implementation to match that.
The use a bidirectional CIS with 2 audio stream will
be added in a future commit.
This removes the _IN_ and _OUT_ and _INOUT_ QOS
values, as well as the direction of the codec QOS
struct.
To keep direction for internal use, the direction
has been added to the endpoint struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BASS client implementation
This is a standalone implementation that
needs to be (heavily) modified for the
broadcast assistant role in the future.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BASS as a standalone service. The service is
used for the scan delegator role, which has not been
fully implemented yet.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Make it consistent for audio.h and capabilities.h that the
array size parameter appear after the array parameter.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Check if the CTE was discovered by Radio peripheral should be
done with use of CTEPRESENT event. Samples count should not
be used for that purpose. If samples count is a value different
than zero for PDUs that don't have CTE, unwanted IQ samples
report will be generated. CTEPRESENT event is set only in case the
CTEInfo filed was correctly parsed by Radio peripheral during
PDU reception.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Don't replace destination of segmented message when acknowledgement is
received from a friend node, otherwise, when segments are retransmitted,
the destination will be used and the friend node will treat it as a new
segmented message.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
BT_ATT_OP_READ_MULT_VL_REQ, BT_ATT_OP_READ_MULT_VL_RSP, and
BT_ATT_OP_NOTIFY_MULT were missing.
Because of this, multiple variable length reads did not time out.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Heartbeat publication sent callback can be used
as a watch mechanism to determine whether
the mesh stack is still capable of sending messages or not.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Fixes#42306
Attach bt_att_chan objects to bt_att when creating them so that the
check in att_chan_new() works. Use the flag ATT_CONNECTED to signal that
a channel is connected instead of attaching it.
The flag ATT_DISCONNECTED was not set anywhere and is replaced by
ATT_CONNECTED.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
We emulate the interrupt by sending the IPI to core itself by
the local APIC for x86 platfrom.
But in X2APIC mode, this no longer works. So we emulate the
interrupt the by writing the IA32_X2APIC_SELF_IPI MSR to send
IPI to the core itself via LOAPIC also. According to SDM vol.3
chapter 10.12.11.
Fixes#42108
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
