Importing MCUX drivers will copy fsl_power and fsl_reset to devices,
not drivers as before. Script will exclude 'freertos' drivers from SDK.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Since LPC devices use different power hardware, a separation is
required between device specific drivers and common drivers.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Several customer configuration (CCFG) settings are useful for
development and deployment. This commit adds support for setting CCFG
values via Kconfig. It follows TI's recommendation of setting CCFG
values and then including the TI provided CCFG. This commit includes
support for enabling the ROM bootloader and additional settings can be
added as needed.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Update the external Segger RTT and SystemView libraries to version
2.52h.
This fixes#14082.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Rename function _PlatformInit() to z_platform_init() to
comply with naming conventions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If CONFIG_POSIX_API is defined, automatically use time() function.
The alternative to that is to explicitly configure mbedTLS' timing
source via API, as required for "raw code", but if user enables
POSIX API, we as well might use existing mbedTLS integration.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
That means that when mbedTLS will need functions like snprintf(),
printf(), a few others, they will be used from libc, as done
normally by most of software. Note that mentioned functions
aren't normally used on code paths doing TLS communication per se.
Instead, they are used by debug logging, additional "print info"
style functions, etc.
Before, when MBEDTLS_PLATFORM_NO_STD_FUNCTIONS was defined, those
functions were stubbed out, so silently didn't work as expected
(a specific symptom seen was that some debug messages were printed
as garbage, because an buffer on stack was passed to dummy snprintf
stub, which didn't do anything to it, and its uninitialized contents
were printed afterwards. Instead, the expectation was that an
application would call a "setter" function to set snprintf, etc.
implementations as provided by application itself.
For Zephyr, we clearly don't need to burden applications with such
setup, instead Zephyr, as an OS, provides integrated environment
were matters like that "just work". So, we just switch to libc-based
functions. If there ever will be usecases for
MBEDTLS_PLATFORM_NO_STD_FUNCTIONS, it can be made configurable later.
Fixes: #16303
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add option for enabling the Code Cache present on the NXP Kinetis
KE1xF SoC series and enable it by default.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a new clock control driver for NXP Kinetis SoCs that have the
Peripheral Clock Controller module (PCC).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This menu contains just the MCUMGR symbol and its children. Get rid of
one menu level by removing it.
Makes the 'External Sources' menu look like this:
HALs --->
Cryptography --->
[ ] Fnmatch Support
[ ] OpenAMP Support
(open-amp) OpenAMP library source path
[ ] mcumgr Support
('OpenAMP library source path' being visible there might be a separate
issue.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit adds basic support for nrf52811 in the arch SoC, dts
and nrfx folders.
The nRF52811 is a Bluetooth 5.1 Direction Finding SoC with comprehensive
protocol support.
The nRF52811 SoC is capable of the latest features of Bluetooth 5.1,
the most prominent being Direction Finding.
The radio in the nRF52811 SoC has comprehensive protocol capabilities,
including Bluetooth 5.1 Directing Finding, all Bluetooth 5 features,
802.15.4, Thread, Zigbee, ANT and 2.4 GHz proprietary.
It has 4 dBm TX power and has been optimized to offer the best RX
sensitivity of all SoCs in the nRF52 series.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This patch adds support for the revision B of the SAM E70 SoC. It adds
all the rev B part numbers, and when users pick-up one of those part
numbers, the revision B HAL is used instead.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is an import of Atmel SAM E70 HAL version 2.3.98, for the revision
B of the chip. The files have been passed through dos2unix to minimize
the differences with the revision A which seems to also have been
imported that way.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement newly introduced `configure` API for nRF 802154 radio driver.
Increase maximum number of slots for Frame Pending bit information in
the radio driver.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
License link provided in stm32cube abstract packages was not
reflecting the actual license in use for these packages.
Update the link to BSD 3-Clause official.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Mark the PPI channels and groups used by the Bluetooth controller
as occupied and thus unavailable for allocation through nrfx_ppi.
Add also a build time assertion that checks if these PPI channels
do not overlap with those assigned to the pwm_nrf5_sw driver
(to replace the comments in this driver that were supposed to warn
about this threat but had in fact little chance to be read by users).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Mark the PPI channels used by the pwm_nrf5_sw driver as occupied
and thus unavailable for allocation through nrfx_ppi.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add initial support for the TI CC13x2 / CC26x2 series with the CC2652R
and CC1352R SoCs. The UART and GPIO peripherals are supported. Drivers
use the driverlib HAL from the TI CC13x2 / CC26x2 SDK.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
The default customer configuration (CCFG) provided by the
TI CC13x2 / CC26x2 SDK puts the configuration in a section different
than expected by Zephyr. It has been modified to use the appropriate
section.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Add low level drivers (driverlib) and RF patches from the TI CC13x2 and
CC26x2 SDK. These sources have been added unmodified with the exception
of converting DOS to UNIX line endings.
The majority of these APIs are available in ROM and inclusion of the
headers will map functions that are not inline to the ROM versions.
Origin: Texas Instruments SimpleLink CC13x2 and CC26x2 SDK
License: BSD 3-Clause
URL: http://www.ti.com/tool/simplelink-cc13x2-26x2-sdk
Purpose: Provides HAL for TI CC13x2 and CC26x2 SoCs
Maintained-by: External
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
SVCall_IRQn is used as enum value for SV Call Interrupt for Cortex-M
based SoCs for which CPU_CORTEX_M_HAS_BASEPRI=y. However stm32cube
for stm32l1xx uses SVC_IRQn enum value for this purpose.
This leads to this error:
arch/arm/include/cortex_m/exc.h:101:19: error: 'SVCall_IRQn'
undeclared (first use in this function); did you mean 'SVC_IRQn'?
NVIC_SetPriority(SVCall_IRQn, _EXC_SVC_PRIO);
^~~~~~~~~~~
SVC_IRQn
NB: ext/hal/st/stm32cube/stm32l1xx/soc/stm32l151xb.h file was already
fixed in 9f8260457b ('ext: hal: st: stm32cube: Add HAL for
the STM32L1x series').
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Atmel Software Framework (ASF) provides a set of low-level header
files that give access to different hardware peripherals of Atmel's
ICs.
Origin: Atmel SAMR21 Series Device Support (1.1.72)
License: Apache-2.0
URL: http://packs.download.atmel.com/Atmel.SAMR21_DFP.1.1.72.atpack
Purpose: Introduction of ASF for the SAM0 series.
Maintained-by: External
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
This commit adds the STM32CUBE HAL for STM32L1x series MCUs.
Origin: ST Microelectronics
License: BSD-3-Clause
URL: http://www.st.com/en/embedded-software/stm32cubel1.html
Commit: 1.8.0
Purpose: HAL layer for STM32L1
Maintained-by: External
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Following introduction of STM32Cube for STM32WB, update stm32cube
folder to enable build of STM32WB Cube package.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This adds the HAL code needed for the SoC for the stm32wb series.
Origin: ST Microelectronics
License: BSD-3-Clause
URL: http://www.st.com/en/embedded-software/stm32cubewb.html
Commit: 1.0.0
Purpose: HAL layer for stm32wb
Maintained-by: External
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
