This commit moves configuration of hfxo from headers defined on board level
to device trees of SoCs.
Signed-off-by: Franciszek Zdobylak <fzdobylak@antmicro.com>
RSRQ is the ratio between send and received signal strength and usually
understood/expected to be represented as a ratio in dB and as such always
has a negative range. So to allow RSRQ to be represented correctly the
resource must allow negative values, but currently it's limited to unsigned
8bit integers.
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
When linking with the 0.16.3 SDK version of picolibc, using long long
cbprintf support pulls in the full floating point printf which is much
larger than the integer-only version. This ends up overflowing the memory
region available for it. Increase the size of that by bumping the start of
the fake region by 8kB.
Signed-off-by: Keith Packard <keithp@keithp.com>
In minimal mode, format modifiers are not supported, leading to a lack
of width and precision support.
long long values are presented correctly in either long long or floating
mode.
Signed-off-by: Keith Packard <keithp@keithp.com>
Picolibc's 'minimal' printf mode reduces functionality and size even more
than the 'integer' mode. Use this where memory is at a premium and where
the application knows that it does not require exact printf semantics.
1.8.5 adds two more printf variants, 'long long' and 'minimal'. The 'long
long' variant is the same as the 'integer' variant but with long long
support enabled. The 'minimal' variant reduces functionality and size even
more than the 'integer' mode. Applications can use this where memory is at
a premium and where the application does not require exact printf
semantics.
With these two added variants, the SDK has enough options so that all of
the cbprintf modes can be supported with the pre-compiled bits:
1. CBPRINTF_NANO - picolibc's 'minimal' variant
2. CBPRINTF_REDUCED_INTEGRAL - picolibc's 'integer' variant
3. CBPRINTF_FULL_INTEGRAL - picolibc's 'long long' variant
4. CBPRINTF_FB_SUPPORT - picolibc's 'double' variant
This patch makes the cbprintf Kconfig values drive the default picolibc
variant, disables picolibc variants not capable of supporting the required
cbprintf level, but allows applications to select more functionality in
picolibc than cbprintf requires.
Note that this depends on the SDK including picolibc 1.8.5. Without that,
selecting the 'minimal' or 'long long' variant in Zephyr will end up with
the default variant from picolibc, which is the full version with floating
point support. When using the module things will work as specified.
Signed-off-by: Keith Packard <keithp@keithp.com>
This option in picolibc switches the assert macro between a chatty version
and one which provides no information at all. This latter mode avoids
placing the associated strings in memory.
The Zephyr option is PICOLIBC_ASSERT_VERBOSE and it is disable by default.
Signed-off-by: Keith Packard <keithp@keithp.com>
Picolibc version 1.8.5 offers additional memory savings and new long-long
and minimal printf variants which can be selected from either the SDK or
module version of the library.
This needed a patch to the Zephyr cmake support bits to enable one of the
new picolibc 1.8.5 features.
Signed-off-by: Keith Packard <keithp@keithp.com>
CBPRINTF_FULL_INTEGRAL doesn't happen to explicitly conflict with
CBPRINTF_NANO, but when CBPRINTF_NANO is enabled, there's no long long I/O
support provided.
Allow picolibc long-long I/O support to also be elided when CBPRINTF_NANO
is enabled to save similar amounts of space.
Signed-off-by: Keith Packard <keithp@keithp.com>
For all remaining samples which now set their integration platform
as native_posix(_64) switch them to native_sim(_64)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable the remaining samples which run now in native_posix also
in native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Clarify comment about why this samples is skipped in
posix arch based targets.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
Add conf and DT overlays for native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The final executable output from the native_sim
(or native_posix) build is zephyr.exe
(in native_posix zephyr.elf happened to be just a copy of
the exe, but in native_sim it is an intermediate build step)
So we need to use the exe instead.
Note: As the exe is generated with a custom target, we need
to install it using install(FILES), which also requires the
destination and permissions to be listed manually. The
permissions set are just the cmake default permissions
for install(PROGRAMS).
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the docs replace references to native_posix with native_sim
* Switch the default test platform to native_sim from native_posix
* Add a runtime check for this sample
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
BINDESC can be used with any POSIX arch based target,
not just native_posix.
Fix the kconfig filter and the sample yaml filter.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Refer to the native_sim overlay instead of the native_posix one,
as native_posix is going to be deprecated soon.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Refer to the native_sim overlay instead of the native_posix one,
as native_posix is going to be deprecated soon.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The title for this board README was very broken, messing up not only
this board's README but also the boards TOC.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Clean up few build all device instances to use the test_gpio node and
different gpio numbers. Makes them somewhat more representative of what
an actual instance would look like.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Some workarounds were introduced for intel cavs2.5 platform bring up.
It is not general so move them to platform code.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Cavs platforms starts from Apllolake to Raptorlake. Some of them need some
workaround for arch_cpu_idle so create a bespoken one. Each workaround is
configured by kconfig setting.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Each arch platform may has a general arch_cpu_idle implementation but
each vendor may has a custom one, so this config will be used for vendor
to override it.
Some workarounds were introduced for intel cavs2.5 platform bring up.
It is not general so move them to platform code.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Add dummy interrupt id until we can support UART interuppt
on i.MX8MP in order to fix compilation warnings.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
The xtensa/nxp_adsp_imx8m linker script is missing
the necessary include statements for linker snippets.
So we need to add them.
This fixes compile warnings like: orphan section `.unstable_id'
from `modules/chre/lib..__modules__lib__chre__platform__zephyr.a
(version.cc.obj)' being placed in section `.unstable_id'.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add _heap_sentry value to fix build errors for
newlib, like: "undefined reference to `_heap_sentry'"
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
When linking, in crtbegin.o for C++ exception support, we pull in
the .tm_clone_table section.
Update the linker scripts to handle this, otherwise we get a
"warning: orphan section `.tm_clone_table'".
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Remove platform.h since is no longer used for SOF.
Move memory.h to include folder and modify the linker
to reflect this.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
The mcp251xfd supports upto 32 filters. Also store the filter usage in
uint32_t instead of uint64_t.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
