Uses the stats subsys to provide simple but useful debugging stats for
power management state changes and timing.
Removes the no longer needed PM_DEBUG config option
Replaces the use of PM_DEBUG for a test clock output pin for mec1501 and
adds in its place an SoC Kconfig option to enable it.
Adds a STATS_SET macro for assigning a value to a stat group field
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The "small" heap is is way sufficient for most 32-bit systems.
Let's provide the option to have only one type of heap allowing for
smaller and faster heap code due to not having a bunch of runtime
conditionals based on the heap size.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This change adds a summary of major enhancements introduced
in v2.7.0 . There were so many it was difficult to narrow
them down!
Great work everyone!
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This include is not used at all by fs.c. Zephyr includes a minimal
sys/stat.h, but only for the minimal libc.
Signed-off-by: Chris Reed <chris.reed@arm.com>
Adds documentation for event objects. Events are posted to event
objects. Threads may wait on an event object for a specified set
of events.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Threads may wait on an event object such that any events posted to
that event object may wake a waiting thread if the posting satisfies
the waiting threads' event conditions.
The configuration option CONFIG_EVENTS is used to control the inclusion
of events in a system as their use increases the size of
'struct k_thread'.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
The k_work::flags field is not an atomic_t and would cause
-Wpointer-sign warning on some compilers. This function was the only
one in work.c to use atomic_get() so there is no benefit to atomicity.
Signed-off-by: Chris Reed <chris.reed@arm.com>
Fixes the format specifier type in a call to shell_printf().
Instead of printing with %x (which expects an unsigned int) for
an address, it is now using %p.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Take ownership of all the neorv32 specific files (dts bindings, soc
implementation, drivers, and board definition).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The GPIO block of the NEORV32 contains fully independent inputs and
outputs (inputN is fully independent of outputN).
This scenario is not handled by the 1pin GPIO test case, so exclude the
neorv32 for now.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add a basic board definition for the open-source NEORV32 RISC-V
compatible processor system (SoC).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add devicetree nodes for the NEORV32 GPIO device.
The GPIO port is 64 bits wide, but Zephyr only supports up to 32 bit
wide GPIO ports. The GPIO device is therefore handled as two Zephyr GPIO
devices with a nexus devicetree node mapping pins 0 to 31 to the device
handling the lower half, and pins 32 to 63 to the device handling the
upper half.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Both nRF I2C drivers (i2c_nrfx_twi and i2c_nrfx_twim) perform the bus
recovery procedure in reaction to timeout (500 ms) of any requested
message transfer. Add implementation of the I2C API recovery function
in both these drivers so that it is also possible to execute this
procedure directly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fixes#38046
Document the changes in twister.rst
Add baud rate to debug message in twister
Add baud parameter to twister's add_device function
Set the twister baud rate from input parameters
Use 115200 as the default baud rate if not specified
Add baud to the hwmap-schema.yaml file
Add --device-serial-baud to twister arguments
Fix compliance issues
Fix mistake in parameter name from device-baud to device-serial-baud
Refactoring of the code in orded to simplify the logic
and clear multiple definitions of the default baud rate.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Signed-off-by: Dennis Ruffer <daruffer@gmail.com>
Size of data pointer for event revival must be at least sizeof
event queue item.
Update to send whole event (id + event)
Signed-off-by: Pavlo Hamov <p.hamov@venstar.com>
If a firmware update is fetched from a server, and no port number is set
in the URI (e.g. coap://example.com/fw_update), the client will try
to connect on the port specified by CONFIG_LWM2M_PEER_PORT.
If a port different from the peer port is to be used for firmware
update, this has to be set explicitly in the URI:
coap://example.com:5683/fw_update.
This fix adds CONFIG_LWM2M_FIRMWARE_PORT, which will be used when
fetching a firmware update without specifying the port number in the
URI.
Signed-off-by: Tjerand Bjornsen <tjerand.bjornsen@nordicsemi.no>
This commit adds a new subcommand to the `demo` command that prints out
the name of the used board.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add __printf_like modifier to validate strings used by shell.
Fixing warnings triggered by this change.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The parameters to FIELD() should be the position and size of each bit
field. Correct the size of IOMODE and MAXFREQ. Otherwise, the MAXFREQ
field is overwritten by the IOMODE update during espi_npcx_configure().
Signed-off-by: Diana Zigterman <dzigterman@google.com>
SVG files are usually created or generated using editors, e.g. Inkscape.
Exclude them from stats/diffs to improve review process by marking them
as generated.
Ref. https://github.com/github/linguist/blob/master/docs/overrides.md
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Added myself as a collaborator to the areas I frequently contribute or
review code. List includes:
- Display drivers
- Documentation
- Kscan drivers
- Sensor drivers
- Power management
- STM32 platform
- Pinmux/pinctrl drivers
- PWM drivers
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add risc-v maintainers and update collaborators.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
Signed-off-by: Peter Gielda <pgielda@antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This is used by autoPTS project so make sure Szymon is aware of all
changes in tester application.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
- Rename to "action" to make its purpose more clear
- Use the _cb suffix to align with naming used for callbacks in other
areas.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Accessing members from pm_device improves code readability, since it
removes dev-> from most accesses.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
