This driver uses the NRF_CLOCK_HAS_HFCLKAUDIO symbol that is defined
in <hal/nrf_clock.h>, so it should explicitly include that header,
not count on this inclusion being done by some other header, like
<zephyr/drivers/clock_control/nrf_clock_control.h>.
Extend also the build assertion that checks if the audio clock can
be used so that now it ensures that the above symbol is defined
(to prevent the driver from silently discarding the audio clock
configured as the clock source).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This is a follow-up to commit 7a2ce2882a.
Inclusion of <hal/nrf_clock.h> should not be done based on the NRF_CLOCK
symbol being defined, because it depends on the order in which headers
are included - that symbol gets defined when <nrfx.h> gets included and
this is not necessarily always happening earlier. Instead of adding
inclusion of <nrfx.h> here, move inclusion of <hal/nrf_clock.h> under
`#if defined(CONFIG_CLOCK_CONTROL_NRF)` where it is actually needed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
As a software construct that depends upon Bluetooth being enabled,
this device should not be enabled by default. Most nRF SoC's have
internal `RNG` hardware that is much more efficient to access.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Explicitly enable `rng_hci` on nRF5340 application core boards, as the
application core dos not have access to a dedicated RNG hardware
peripheral (limited to the network core).
Signed-off-by: Jordan Yates <jordan@embeint.com>
For 'wifi connect' or 'wifi ap enable' CMD, there is 'invalid option'
error log when input '-i' parameter. Parsing '-i' can fix this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
The nucleo_f746zg board doesn't handle RX/TX buffers in
non-cacheable memory when required. This leads to an error
in the test_adc_api with the log:
Supplied buffer is not in a non-cacheable region.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Add basic board definition of the u-blox EVK-IRIS-W1-rw612 board.
Adds maintainer info for u-blox boards.
Signed-off-by: Tarang Patel <tarang3399.patel@gmail.com>
If gpio-reserved-ranges to reserve some pins which used by other CPU
Core's OS, we could only handle usable pins owned by current CPU
Core in interrupt handler.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
If GPIO_DISCONNECTED is not supported by GPIO driver, then try to configure
the pin to be input, otherwise there will be some unstable signal between
two test pins.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
If the platform uses SCMI pinctrl driver, pinctrl regitster can't accessed
by CPU Core directly, and currently SCMI pinctrl driver has no API to read
back the register value, so use default pad config value for GPIO pad
configuration, and in theory we could use a fixed pad config value in this
driver as each new GPIO configuration has no relation with previous
configuration.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
It looks like the file was originally copy-pasted
from frdm_mcxn947_mcxn947_cpu1.yaml
but the name was not properly updated.
This commit corrects the name to match the actual board.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Updates the LE legacy pairing procedure as a result of errata ES-24491.
New part:
If the initiating device receives an LP_CONFIRM_R value that is equal to
the LP_CONFIRM_I value, the pairing process shall be aborted and fail
with "Confirm Value Failed" as reason.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Add missing tests for edge cases (ex. peek on empty heap, push to full
heap, ...) to get to 100% coverage (lines & branches)
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
make test cases more readable using more direct assert_ macros, for
example zassert_not_null(foo, ...) instead of
zassert_true(foo != NULL, ...).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Increased the default number of TX and RX buffer descriptors from 4 to
16. Since the current default buffer size (CONFIG_NET_BUF_DATA_SIZE) is
128, increasing the number of RX buffers is needed to be able to receive
at least one frame of a maximum size split between multiple buffers.
The default number of TX buffers was increased to match the number of RX
buffers and to be able to transmit large frames with many fragments.
Added build-time configuration validation to ensure that the combined
size of all RX buffers is sufficient to receive a maximum-sized Ethernet
frame.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
DMA copies frames which cannot fit into a single buffer into
multiple receive buffers. Updated the receiving code to combine
these buffers into a net_pkt with multiple fragments.
This allows the driver to handle larger Ethernet frames that
span across multiple DMA buffers.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Always reading from descriptor with index 0 could cause processing
of the buffers in a different order than they were received. Fixed by
reading from the next unprocessed position in the ring of descriptors
instead.
Fixed unused variable warnings.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Add test case verifying that offloaded DNS APIs are called as expected
and that enabling/disabling DNS offloading at runtime works.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new socket offloading functions, allowing to enable/disable
offloaded DNS implementation at runtime. This may be useful if there is
a mix of offloaded/native network interfaces in the system, so the
application can choose which DNS backend to use.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a new "if_name" pointer to the transport configuration structure,
allowing the application to bind MQTT client to a specific network
interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implemented unit tests for the crc4 and crc4_ti functions as they were
missed when they were introduced
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
In the function `sdp_client_ss_search()` and
`sdp_client_ssa_search()`, the allocated buf is not released if the
required UUID is invalid.
Un-reference the allocated net buffer if the UUID is invalid.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Although xt-clang is based on clang, for some reason, it still
lists xcc system include path as the first search path (e.g.
for stddef.h), and the clang system include path as last. This
creates a big issue when the code starts to use any standards
past C89 (since xcc is based on GCC 4.2). We can use compiler
property nostdin_include to add -isystem to compiler options.
However, some modules (e.g. picolibcs) somehow ignore this.
So we also need to forcibly do add_compile_options() to make
sure the clang system include path is placed before the xcc
system include path.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Xtensa toolchain xt-clang needs similar treatment to xcc in
terms of nostdinc and nostdinc_include, so add it to the if
block to exclude these by default.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some tests explicitly test for deprecated functions and they
override the macro __deprecated to avoid compiler warnings.
So, for xcc/xt-clang, only define __deprecated if it has not
already been defined.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since compiler options are unconditionally passed to the script,
we may pass arguments that are not recognized. So we change to
only parse known arguments. Currently, it only cares about -l,
which is related to linking libraries.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Added automatic KMU key provisioning, when keyfile.json
file exists in the build directory.
This enables automated key provisioning during the
flashing process to enable testing nRF54L aplications using Twister.
Only applicable on nrfutil runner.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Add support to use DMA mode with cc23x0 AES module. This consists in
specifying the DMA channels and peripherals.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
