This implements arch_thread_priv_stack_space_get() so this can
be used to figure out how much privileged stack space is used.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to initialize the privileged stack for
each thread during thread initialization. This prevents
information leaking if the thread stack is reused, and
also aids in calculating stack space usage during system
calls.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This implements arch_thread_priv_stack_space_get() so this can
be used to figure out how much privileged stack space is used.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to initialize the privileged stack for
each thread during thread initialization. This prevents
information leaking if the thread stack is reused, and
also aids in calculating stack space usage during system
calls.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Only set the privileged stack pointer for thread stacks, but
nullify the pointer for kernel-only stacks, as these stacks
do not have the reserved space. The psp pointer may point to
arbitrary memory in this case if stack is not big enough.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to display privileged stack usage for
architectures that support obtaining this information.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The per-thread output after the first stack usage line is not
aligned which makes it harder to decipher the content.
So align them for easier reading.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a new arch_thread_priv_stack_space_get() interface for
each architecture to report privileged stack space usage. Each
architecture will need to implement this function as each arch
has their own way of defining privileged stacks.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
IPPROTO_IPV6 option was set on TCP socket (besides doing it already in
tcp.c) instead of UDP. Fix that.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use correct output for the changed-files action so that bsim tests are
also run on deleted files, no just added/copied/modified/renamed
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use correct output for the changed-files action so that docs
is built in CI when relevant files are *deleted* too, not just
added/renamed/modified
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds the default MCUboot operating mode when building using sysbuild.
Fix mcuboot sysbuild for frdm_mcxn947.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Currently, if the user wants to allocate heap on external RAM
he needs to enable CONFIG_ESP_SPIRAM and set a threshold defined
with CONFIG_ESP_HEAP_MIN_EXTRAM_THRESHOLD.
This approach requires that we re-implement `k_malloc` and allocate
the memory on the proper region based on the block size.
By using the shared multi heap feature the proccess of allocating
memory from external memory becomes more fluent and simple.
The attribute SMH_REG_ATTR_EXTERNAL was added to reference the
external memory.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Update `shell_backend_uart` to take into account the new line print by
`z_cursor_next_line_move`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
When the shell start, it will print two lines. The reason for that
behavior is not documented. Remove that to make the code simpler and
shorter one line at a time.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The fact that the function was returning `true` for empty line was an
unexpected behavior according to the name of the function itself and how
it was used elsewhere.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Follow ARM architecture recommendations:
* Use Data Synchronization Barrier (DSB) instruction before WFI,
to ensure that pending memory transactions complete before
changing state.
* To guarantee pend interrupts are recognized before subsequent
operation, use ISB after CPSIE (__irq_enable)
This prevents sporadicy delayed ISRs due to continous MEC172x
entering/exiting deep sleep.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Instead of using filter (which is expensive in terms of CI as
it needs to run cmake on everything to get the full kconfigs
before filtering can be done), change that to a curated list
of allowed platforms. This avoids the expensive filtering
operation, yet can still run on some emulated platforms to
verify the dictionary output.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds support for setting the operating mode of the TMP116/7 sensor to
either shutdown, continuous conversion or one-shot mode.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Before commit baa70d8d36 ("arch/arm64/mmu: fix page table reference
counting part 2") it was possible to perform a partial unmap of a block
mapping. Restore that ability and provide a test case to validate it.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Resend CMD0 before each CMD8 query while initialising the card, as the
first CMD0 is not always sufficient to recover the card.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Since testing.c/h was moved to mesh, all functions and
structs in those files now follow a bt_mesh_test_*
naming scheme to be consistent with the naming in Zephyr.
Due to missing includes in many files, this commit also
added some that were missing in order to build since
the order of includes have changed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The file is only ever used by mesh and it is even stated in the
header of the file that it is internal APIs.
The include file has been merged with the host testing.h file
as that was mesh specific as well. Similarly the testing.c
file was also moved
This is part of a process to clean up the file structure of
Bluetooth as it's a bit messy, which is evident from the
MAINTAINERS.yml file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Re-arrange Twister command line options for test plan reporting
to a dedicated group with mutally-exclusive options to reflect
actual implementation and its dry-run execution mode.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Drop support for Google Kukui EC board which was used for
early Zephyr experiments but doesn't really exist anymore.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Re-run issue check when a PR is updated, i.e. when someone adds
'Fixes...` to the PR body.
This is mostly for release branches and has no effect on main branch.
Also, add concurrency check in the workflow.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There appear error on `ZBUS_CHAN_DEFINE` when `CONFIG_CPP`
is enabled. Error: `zephyr/zbus/zbus.h:352:9: error: designator
order for field 'zbus_channel_data::highest_observer_priority'
does not match declaration order in `zbus_channel_data`.
Solution: change order in `ZBUS_CHAN_DEFINE` macro according
to zbus_channel_data structure.
Signed-off-by: Mariusz Dziębowski <mdziebowski@meden.com.pl>
- Allow setting polarity from DT.
- At least on bcf, going from 0 to 255 causes brightness to decrease
(although 0 is still off and 255 is still on).
- Seems to work as expcted by using TnPWML register.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
TX/RX FIFO underrun shouldn't crash the RTOS when it occurs.
Also, since this can also happen under "normal" conditions
(i.e: DMA doesn't copy data fast enough from/to SAI's FIFOs)
the software should be able to recover from it.
As such:
1) Remove `z_irq_spurious()` call.
2) Clear error flag
3) De-escalate error message to warning message
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This commit rebrands the STM32 EXTI API to a more hardware-agnostic
"GPIO interrupt controller" API, in anticipation of the introduction of
new series lacking the EXTI peripheral. The GPIO and EXTI drivers are
updated to match the rebranded API.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
This commit makes the contents of the stm32_exti_line_t data type opaque to
the EXTI GPIO interrupt controller API users. The GPIO driver is updated
to comply with this API change.
N.B.: while some assertions are removed as part of this commit, they were
broken since forever anyways, so nothing of value is lost.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Move the functions that interact with EXTI configuration registers to
select or get the GPIO port that triggers events on a given EXTI line
to the EXTI driver.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Modify all functions in the GPIO driver that interact with the EXTI
so that names, signatures and comments match what they do better.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Use the `gpio_pin_t` type for all variables that hold a pin number (0..15).
Change all `int` to `uint32_t` instead, as signedness is unwanted.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
