Convert SYS_INIT to DEVICE_DT_INST_DEFINE, this allows the build system
to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert SYS_INIT to DEVICE_DT_INST_DEFINE, this allows the build system
to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Fix an incorrectly declared compatible and adjust some DT macros as
well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert SYS_INIT to DEVICE_DT_INST_DEFINE, this allows the build system
to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert SYS_INIT to DEVICE_DT_INST_DEFINE, this allows the build system
to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert SYS_INIT to DEVICE_DT_INST_DEFINE, this allows the build system
to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Convert SYS_INIT to DEVICE_DT_INST_DEFINE, this allows the build system
to track the device dependencies and ensure that the interrupt
controller is initialized before other devices using it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
On some STM32 families (such as F4), temperature and Vbat sensor share the
same ADC channel, which can lead to conflict when reading them, and wrong
measurement can follow.
To alleviate this problem, this commit moves the setting of the common
path internal channel to the sensor drivers themselves instead of doing
it in the ADC driver.
The teardown is still done in the ADC driver, systematically, instead of
channel by channel (which has the same result).
By moving this logic in the sensor drivers, the properties temp-channel,
vbat-channel and vref-channel becomes useless and are thus removed.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Introduce hwinfo driver for Texas Instruments SimpleLink CC13xx/CC26xx
SOC series, with support for retrieving device's ID and cause of reset.
By default, the pre-programmed, 8-bytes length IEEE MAC address is used
for device's ID, with option ('HWINFO_CC13XX_CC26XX_USE_BLE_MAC') for
use 6-bytes length BLE MAC instead. By default, read-only values stored
in FCFG (Factory Configuration) are used but additional Kconfig option
('HWINFO_CC13XX_CC26XX_ALWAYS_USE_FACTORY_DEFAULT') is also provided,
which allows to use values from writable CCFG (Customer Configuration)
area. In all cases, device ID value is provided in big-endian which
matches what TI's UniFlash tool returns.
For reset cause, 'SysCtrlResetSourceGet()' function from TI's driver
library is used and its value is mapped to Zephyr's implementation.
Importantly, only root cause of reset is available on CC13xx/CC26xx
platform as described in MCU Technical Reference Manual ('RESET_SRC'
field in 'RESETCTL' register):
"Shows the root cause of the last system reset. More than the
reported reset source can have been active during the last
system reset but only the root cause is reported."
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Use clock control API to retrieve the module's frequency and
update the boards using it to provide the source clocks.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add CAN stats for MCAN drivers.
Update MCAN drivers to use CAN_DEVICE_DT_INST_DEFINE
which initialises and registers CAN stats if enabled.
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
A file just named `init.c` is not that descriptive inside of a project
that has a lot of files of already. Rename to `ethos_u.c`.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
The Ethos-U driver was using IRQ_DIRECT_CONNECT. This is not what the
driver needs as this will not detect a context switch when coming out
of the isr, and this is needed as the isr will release a semaphore.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Add phandle prop to reference any regulator that must
be enabled in order for the LPADC to function as intended.
Change LPADC driver to use this property if present.
LPADC on LPC55S36 depends on VREF peripheral, enable for this platform.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add binding, include header, and driver for NXP VREF IP block.
NXP VREF is an internal voltage reference generator on some SOCs
that fits well with the regulator API in zephyr.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
When timer calibration for SmartBond(tm) was added, opaque type
clock_control_subsystem_t that used to have device tree ordinal
number was changed to enum to allow values that are not in device
tree (like no clock selection).
During this process counter driver for SmartBond(tm) was not updated
accordingly, resulting in wrong frequency being reported to counter
driver.
Failure could be seen when samples/drivers/counter/alarm was execute on
da1469x_dk_pro board.
With this fix counter driver uses correct type when
clock_control_get_rate is called and counter test works again.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
Add an explicit include of zephyr/arch/cpu.h before fsl_clock.h so that
the Zephyr cpu definitions are parsed before the hal ones.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
PRE_KERNEL_1 is more suited for dealing with devices, so move out of
EARLY.
Verified on hardware and things seem to behave the same. Something was
changed since this was first introduced as this was not possible for
some reason.
Fixes#62627
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added ability to read contents of TMP116 configuration register by adding
an attribute get function that supports the SENSOR_ATTR_CONFIGURATION
option. Followed the same approach as the TMP108 driver. Interpretation of
the returned value is left up to the caller.
Tested using Nucleo-F401RE and Temp-Log 2 (TMP116) click board and
confirmed a read of the configuration register returned the expected
value.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
The Cat.1 STM32L1 MCUs do not provide the subsecond feature. This disable
subsecond related code for these MCUs.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
STM32 BBRAM depends on RTC to work. This changes STM32 RTC init stage to
PRE_KERNEL_1 to allow RTC driver to initialize before BBRAM driver.
Some adjustments are made so that kernel API is not used during the init
procedure.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
Modify STM32H7 SPI driver so that it updates the rx/tx
pointers correctly (depending on the frame size) when DMA
is enabled. Also, make the dummy rx/tx buffer cache-coherent.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
The way of setting a nocache region in devicetree has changed.
Adapt the H7 SPI driver to this new circumstance.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
This commit fixes an issue with the nrfx uarte driver to allow the
async and interrupt driven UART APIs to coexist on different uart
instances. As both APIs cannot be used simultaneously for a given
instance, there is no need to handle
CONFIG_UART_EXCLUSIVE_API_CALLBACKS in this driver.
Signed-off-by: Eivind Jølsgard <eivind.jolsgard@nordicsemi.no>
There was a new Kconfig for USB-C init priority that is conflicting
with currently used Kconfig for init of VBUS and TCPC.
This commit changes the names to more specific related to the subsystem
they belong to.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
The DT_INST_CLOCKS_CELL macro takes as the first argument the device
instance and not the cell index. This change correctly gets the second
index of the first device as intended.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Drivers for nRF SoCs using pinctrl did not select PINCTRL. This means
boards are forced to enable PINCTRL.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The SDK function ENET_SetCallback is deprecated and has
been removed in the latest SDK.
Update the driver to set the callback during Init by using
the callback config param.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
bsearch() tries to find the exact match for the key, otherwise it
returns NULL. However, here we want to find two elements our key lies
in-between. This requires some rather complicated logic that pretends
it found the exact match even if it didn't. Replace this with a simple
implementation of binary search.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
The value of n_comp is wrong for ntc-thermistor-generic. Introduce a
helper macro to compute n_comp correctly for both thermistor types.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
The pullup resistance was assumed to be the maximum ADC value. This is
incorrect when the reference ADC voltage and the thermistor pullup
voltage differ. Use the pullup_uv property from DT instead.
The equations for the thermistor resistance are also wrong. The correct
equations are (see https://en.wikipedia.org/wiki/Voltage_divider):
R1 = R2 * (Vin / Vout - 1)
for the positive-connected resistor, and
R2 = R1 * (Vin / Vout - 1)^-1
for the negative-connected resistor. These were transformed so that
they can be computed using integer math.
Signed-off-by: Paweł Anikiel <pan@semihalf.com>
GSM_MUX and UART_MUX are being marked as deprecated.
The new modem subsystem MODEM_CMUX and MODEM_PPP
should be used instead.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
GCC format-truncation kicks in on this printk whenever the logging
configuration transforms the LOG_WRN below into a noop, and the snprintk
return argument become unused.
Fix that by switching to strncpy, fixes:
zephyrproject/zephyr/drivers/modem/hl7800.c:1786:74: warning: '%s'
directive output may be truncated writing up to 53 bytes into a region
of size 21 [-Wformat-truncation=]
reproduced with:
west build -p -b mg100 -T samples/net/telnet/sample.net.telnet
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commit adds Kconfig variables to configure ADLTC2990. This commit adds
basic driver code for analog devices ltc2990 sensor.
Signed-off-by: Jilay Pandya <jilay.pandya@zeiss.com>
Rework RAM disk driver to be configured using devicetree and
support multiple instances.
This patch also removes a copy of the RAM disk driver,
tests/subsys/fs/fat_fs_dual_drive/src/disk_access_test_drv.c,
that was there for testing multiple disk drivers support.
Bonus: one SYS_INIT() less and a memory region can be exported to the
host.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commit updates the modem_cellular driver to use the
new naming scheme for the modem_chat functions.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
This driver only supports a single instance. This commit cleans up the
device definition and indicates this.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Assert the source clock is defined in the device tree to ensure the
reference is valid.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
The DT_INST_CLOCKS_CELL macro takes as the first argument the device
instance and not the cell index. This change correctly gets the second
index of the first device as intended.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Dom0less is Xen mode without privileged domain. All guests are created
according to hypervisor device tree configuration on boot. Thus, there
is no Dom0 with console daemon, that usually manages console output
from domains.
Zephyr OS contains 2 serial drivers related to Xen hypervisor: regular
with console shared page and consoleio-based. The first one is for
setups with console daemon and usually was used for Zephyr DomU guests.
The second one previously was used only for Zephyr Dom0 and had
corresponding Kconfig options. But consoleio is also used as interface
for DomU output on Dom0less setups and should be configurable without
XEN_DOM0 option.
Add corresponding XEN_DOM0LESS config to Xen Kconfig files and proper
dependencies in serial drivers.
Signed-off-by: Dmytro Firsov <dmytro_firsov@epam.com>
Co-authored-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Drivers should only log extra information during initialization if
debug logging is enabled. Otherwise it always clutters the console
when not required.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
