Adds initial support for hm330x dust sensor series. Allows to read PM1,
PM2.5 and PM10 concentrations in atmospheric environment. A further
update to the driver may add support for also reading "standard" CF1
concentrations by exposing of a custom sensor attribute or a Kconfig
option. Tested with Grove - Laser PM2.5 Sensor (HM3301) attached to a
Wio Terminal.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fix the print format string so the "%" is printed
instead of a bogus value.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Some AT commands, are longer than 255 chars.
Also, script_send_request_pos is uint16_t, so with this change,
request_size will have the same type.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
Fix regression in sw switch single timer id use for nRF53x
series SoC.
Regression introduced in commit cfcbe5d68e ("Bluetooth:
Controller: Remove redudant header file includes").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Excluded cy8cproto_062_4343w and cy8cproto_063_ble from
samples/userspace/shared_mem sample due to a hardware
limitation with number of available MPU regions.
Sample throws warning:
`num_parts of 4 exceeds maximum allowable partitions (2)`
With the Cortex M4 on the boards only 2 mpu regions are left
and available to be used with the sample.
Signed-off-by: Pavlo Havrylyuk <pavlo.havrylyuk@infineon.com>
The C standard specifies 'hh' as a length modifier indicating an integer
conversion specifier applies to a signed char or unsigned char
argument. Python doesn't do that, so replace relevant %hh with %h.
Also fix the handling of %ll so that it applies to all integer specifiers
as well.
Signed-off-by: Keith Packard <keithp@keithp.com>
Prior to this patch, the BRD4170A did not enable the UART console
using pinctrl, which was recently added for this SoC series.
Signed-off-by: Warren Buffer <warren.buffer78@gmail.com>
This commit enables MSPI instance for apollo4p_blue_kxr_evb board.
Also adds pin configuration for each instance.
Signed-off-by: Aaron Ye <aye@ambiq.com>
This commit enables SPI instance for apollo4p_blue_kxr_evb board.
Also adds pin configuration for each instance.
Signed-off-by: Aaron Ye <aye@ambiq.com>
This commit enables I2C instance for apollo4p_blue_kxr_evb board.
Also adds pin configuration for each instance.
IOM4 is used for Bluetooth HCI-SPI inside of chip.
So no i2c4_default is defined.
Signed-off-by: Aaron Ye <aye@ambiq.com>
The symbol _end is used to indicate the start of heap in
the common libc malloc code. On ACE, heap is in uncached
area. However, _end was in the cached area while end of
heap is in uncached area. This resulted in incorrect
calculation of heap size. So move _end into uncached
area so correct heap size can be calculated.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enable backends by default, instead of requiring some other module to
turn them on. This aligns with the behaviour of sensor drivers and
`BT_RPMSG`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Be explicit about the HCI backend that Bluetooth unit tests require.
Some unit tests depend on `BT_HAS_HCI_VS`, so also enable that.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update all Nucleo shield samples and references to them so that they
use the new zephyr:code-sample extension.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Correct DFU and BLOB models specs names. Also mentioning that they are
experimental yet (under BT_MESH_V1d1 option).
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Rename the bsim header in preparation for having more
simulated targets.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
To avoid a build error when coded phy is not enabled
for a nrf53: These three functions are only used for coded phy,
and depend on macros which are only defined if coded phy
is enabled.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch use of kconfig:
* SOC_SERIES_NRF53X -> SOC_COPATIBLE_NRF53X
* SOC_NRF5340_CPUNET -> SOC_COMPATIBLE_NRF5340_CPUNET
to also select those options/code when building for
the nrf53 simulated targets.
Also switch three kconfig range dependencies from
SOC_SERIES_NRF52X to SOC_COPATIBLE_NRF52X
(IRQ priority related) for consistency. These sound
not really have an impact.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Select the newly introduced nrf53 compatible kconfig options.
These are common both for real HW and for simulated HW,
allowing SW to behave appropriately for both.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix assertion due to late Peripheral CIS active flag being
initialized. CIS active flag shall be initialized when it is
acquired.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
DT_DRV_COMPAT was unused for this driver. To get a node identifier
DT_NODELABEL() macro was used. Refactor to use the correct interfaces
using instance number 0.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Set vendor to `snps` to be consistent with vendor in board yaml
file.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Adds support for controlling the MCUboot (and application) signing
key, and allows for generating encrypted updates.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The bad DMA request was observed as SPU FLASHACCERR when building for
nrf5340dk_nrf5340_cpuapp_ns target. The bad DMA request would manifest
itself as device failing to reconnect after USB cable was reconnected.
The issue was especially visible with CDC ACM sample because SET LINE
CODING request has 7 bytes payload.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
It is always possible to bind to same port if the sockets
are in different address family.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The at86rf231 frame buffer access mode read differs from all other
transceivers by only transfer one more byte after PSDU data instead
three. This difference is not evaluated in the current version of
the driver. The current change add the necessary check and read the
missing data (EQ, TRAC).
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Previously, the `uart_console_isr()` routine assumed that the
return value of several uart API functions would only ever
return the equivalent of a boolean value. In fact, an integer
is returned on occasion, and that integer can take on many
values.
Since unary operations would either go to "true" or "false"
and since any non-zero integer evaluates to "true", even a
return value of something like `-ENODEV` would evalueate
to true.
Explicitly compare against the integer-equivalent value of
the expected boolean output.
With this, in the case of errors, negative return values do
not evaluate to "true", and the infinite loop is avoied.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
While it doesn't seem to be an issue for HTML rendering, the use of
\verb is not allowed within LaTeX equations and breaks the PDF build.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
