Both pin sets and values encoding pin values are ultimately represented
by 32-bit unsigned integers. Provide typedefs that make the role of a
parameter explicit.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit moves interrupt configuration for a single pin from
gpio_pin_configure to gpio_pin_interrupt_configure function.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit adds following functions which work with pin logical levels
(take into account GPIO_ACTIVE_LOW flag):
- gpio_port_get, gpio_port_set_masked, gpio_port_set_bits,
gpio_port_clear_bits, gpio_port_set_clr_bits
- gpio_pin_get, gpio_pin_set
Functions which work with pin physical levels:
- gpio_port_get_raw, gpio_port_set_masked_raw, gpio_port_set_bits_raw,
gpio_port_clear_bits_raw, gpio_port_set_clr_bits_raw
- gpio_pin_get_raw, gpio_pin_set_raw
As well as functions:
- gpio_port_toggle_bits, gpio_pin_toggle_bits
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit makes following changes to GPIO dt-bindings flags:
- Added GPIO_ACTIVE_LOW, GPIO_ACTIVE_HIGH to indicate pin active state.
- Added GPIO_OPEN_DRAIN, GPIO_OPEN_SOURCE to configure single ended pin
driving mode.
- Added GPIO_PULL_UP, GPIO_PULL_DOWN flags.
- GPIO_INPUT, GPIO_OUTPUT to configure pin as input or output.
- Added GPIO_OUTPUT_LOW, GPIO_OUTPUT_HIGH flags to initialize output
in low or high state.
- reworked GPIO_INT_* flags to configure pin interrupts.
- following flags were deprecated: GPIO_DIR_*, GPIO_DS_DISCONNECT_*,
GPIO_PUD_*, GPIO_INT_ACTIVE_*, GPIO_INT_DOUBLE_EDGE, GPIO_POL_*.
To be aligned with Linux DTS standard any GPIO flags that should not be
used in DTS files are moved from include/dt-bindings/gpio/gpio.h file to
include/drivers/gpio.h with an exception of several old flags which
removal would cause DTS compilation errors. Those remaining old flags
will be removed from include/dt-bindings/gpio/gpio.h at a later stage.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Added new LE Feature Support bit mask as documented in
Bluetooth Spec. v5.2 Vol 6, Part B, Section 4.6 Feature
Support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add missing and new HCI Error code values as defined in
Bluetooth Core Specification v5.2.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Gain values are specified with enumeration values that can't be used
to reverse the effects of scaling the input signal. Provide a
function that reverses the effect of the gain by scaling a measured
value.
Also provide a function that converts a raw measurement captured with
a reference voltage and specific gain and resolution to the
corresponding voltage in millivolts.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Document why a privacy-disabled scanner will not notify about directed
advertising reports. This is the default behaviour of the
privacy-disabled scanner. In order to receive the reports the option
BT_SCAN_WITH_IDENTITY must be enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Function to put devices in lower power mode were all implemented in the
same way. Deduplicate code there by implementing single function to
handle all cases.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Extends the keyboard scan callback row and column arguments from 8-bits
to 32-bits to support a touch panel driver implementation.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Works like __DEPRECATED_MACRO with a custom message. Can do this for
example:
#define FOO __WARN("Please use BAR instead") ...
Implement __DEPRECATED_MACRO with __WARN().
Useful for https://github.com/zephyrproject-rtos/zephyr/pull/21506.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Macro was failing when handler was NULL and else case was
hit because of attempt to concatenate with handler which was
set to NULL (which is ((void *)0)).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
To be able to successfully compile the kernel for the ARM64 architecture
we have to tweak the compiler-related files to be able to use the
AArch64 GCC compiler.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Introduce the basic ARM64 architecture support.
A new CONFIG_ARM64 symbol is introduced for the new architecture and new
cmake / Kconfig files are added to switch between ARM and ARM64.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
ARM cores may have a per-core architected timer, which provides per-cpu
timers, attached to a GIC to deliver its per-processor interrupts via
PPIs. This is the most common case supported by QEMU in the virt
platform.
This patch introduces support for this timer abstracting the way the
timer registers are actually accessed. This is needed because different
architectures (for example ARMv7-R vs ARMv8-A) use different registers
and even the same architecture (ARMv8-A) can actually use different
timers (ELx physical timers vs ELx virtual timers).
So we introduce the common driver here but the actual SoC / architecture
/ board must provide the three helpers (arm_arch_timer_set_compare(),
arm_arch_timer_toggle(), arm_arch_timer_count()) using an header file
imported through the arch/cpu.h header file.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The initial prototypes for sys_trace_* are not needed
because they are either declared in the specified tracing header
or as empty #defines further in the header.
These actually cause linkage conflicts if CTF tracing is attempted
with C++ projects.
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
The __deprecated symbol can be pre-defined to avoid warnings of use of
deprecated API in tests of that API. Enable that same feature for
macros that are deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Similar to pairing_confirm this callback is called each
time a peer requests pairing, but for all types of
pairings, except SSP. The pairing req/rsp information is
passed as a parameter so the application can decide
wheter to accept or reject the pairing.
Fixes: #21036
Signed-off-by: Martin Rieva <mrrv@demant.com>
This commit fixes an issue observed with SimpleLink sockets with
multiple definitions of `gethostname` function. So far, the definition
within `socket.h` was not visible when offloading was enabled.
As this is no longer the case, and SimpleLink partially uses POSIX
subsystem, builds for this platform resulted in compilation error.
The issue was fixed by moving `gethostname` declaration in unistd.h
inside the `#ifdef CONFIG_POSIX_API` block.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of using a custom offloading interface, users can use
`NET_SOCKET_REGISTER` macro to register custom socket API provider. This
solution removes a limitation, that only one offloaded interface can be
registered and that it cannot be used together with native IP stack.
The only exception remainig are DNS releated operations -
`getaddrinfo`/`freeaddrinfo`, which, when offloaded, have to be
registered specifically.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Corrected improper return value description of
settings_runtime_get().
Added return value description to each of settings handler
description.
Include run-time API into doxygen build.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The hostname member of struct mqtt_sec_config is used as optval
argument to ztls_sesockopt_ctx().
optval is declared as const void* so no need to limit hostname
to not allow const variables
Signed-off-by: Kim Bøndergaard <kibo@prevas.dk>
Moves the Mesh AES-CCM module out into a separate module, to make it
accessible from other subsystems. Adds the new CCM API in
include/bluetooth/crypto.h along with the bt_encrypt functions.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Use signed values for timeout in UART asynchronous API, to be consistent
with timeout type in timer and workqueue values.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Instead of having TI_CCFG_PRESENT as a symbol that's only defined in
soc/arm/ti_simplelink/cc13x2_cc26x2/Kconfig.defconfig.series and y when
SOC_SERIES_CC13X2_CC26X2 is enabled, turn it into a helper symbol that's
selected by SOC_SERIES_CC13X2_CC26X2.
This avoids having a symbol that's only defined in a Kconfig.defconfig
file, which is confusing. It also makes things a bit more generic, in
case other boards with CCFGs are added.
Also rename it to HAS_TI_CCFG to be consistent with other helper
symbols, and add a help text.
Flagged by scripts/kconfig/lint.py.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are various situations where it's necessary to support turning
devices on or off at runtime, includin power rails, clocks, other
peripherals, and binary device power management. The complexity of
properly managing multiple consumers of a device in a multithreaded
system suggests that a shared implementation is desirable. This
commit provides an API that supports managing on-off resources.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Since the various delegates have different data types for their
parameters, this makes the call into this macro a little simpler
(alleviating the need for each call to know how it'll be handed off
down the chain).
Signed-off-by: Erik Johnson <erik.johnson@nimbelink.com>
This patch introduces the periph to/from memory dma transfer
define new values for dma cells on client side
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Introduce a new counter API function for reading the current counter
value (counter_get_value()) and deprecate the former counter_read() in
favor of this.
Update all drivers and calling code to match the new counter API.
The previous counter driver API function for reading the current value
of the counter (counter_read()) did not support indicating whether the
read suceeded. This is fine for counters internal to the SoC where the
read always succeeds but insufficient for external counters (e.g. I2C
or SPI slaves).
Fixes#21846.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add system power management direct force trigger mode. In this
mode application thread can directly put system in sleep or deep
sleep mode instead of waiting for idle thread to do it, so that
it can reduce latency to enter low power mode.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Change sys_pm_force_power_state only works for the current ongoing
suspend operation, before the end of syspend state forced_pm_state
will be cleared.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
commit 971ae59913 ("net: pkt: Make sure iface is not null when
accessing L2") fixed net_if_l2 where iface was NULL, however if
iface->if_dev is NULL, the check breaks and returns an offset of
NULL (0x82 or so). This is incorrect.
Let's add a check for iface->if_dev as well.
Signed-off-by: Michael Scott <mike@foundries.io>
As mDNS requests set DNS id to 0, we cannot use it to match
the DNS response packet. In order to allow this functionality,
create a hash from query name and type, and use that together
with DNS id to match request and response.
Fixes#21914
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In zephyr_linker_sources().
This is done since the point of the location is to place things at given
offsets. This can only be done consistenly if the linker code is placed
into the _first_ section.
All uses of TEXT_START are replaced with ROM_START.
ROM_START is only supported in some arches, as some arches have several
custom sections before text. These don't currently have ROM_START or
TEXT_START available, but that could be added with a bit of refactoring
in their linker script.
No SORT_KEYs are changed.
This also fixes an error introduced when TEXT_START was added, where
TEXT_SECTION_OFFSET was applied to riscv's common linker.ld instead of
to openisa_rv32m1's specific linker.ld.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
This commit does the following:
- renames the 'text' ROM section to 'rom_start', to reflect
that this section is the first section of the image.
- renames the 'TEXT_SECTION_NAME_2' section to 'text', since
that section (whose start is pointed by _image_text_start)
holds the entire image text section.
The commit removes the confusion by having multiple ROM sections
named as 'text' in ARM Cortex-M builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
We should not use indentation for pre-processor directives.
This commit fixes the indentation in the ARM Cortex-M linker
script.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Device config structure is placed in rom section but there was
no const prefix used. Lack of prefix suggested that structure
is in ram (ram_report is also fooled). Added const prefix to
explicitly inform that it goes to rom.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It's possible for a thread to abort itself simultaneously with an
external abort from another thread. In fact in our test suite this is
a common thing, as ztest will abort its own spawend threads at the end
of a test, as they tend to be exiting on their own.
When that happens, the thread marks itself DEAD and does all its
scheduler bookeeping, but it is STILL RUNNING on its own stack until
it makes its way to its final swap. The external context would see
that "dead" metadata and return from k_thread_abort(), allowing the
next test to reuse and spawn the same thread struct while the old
context was still running. Obviously that's bad.
Unfortunately, this is impossible to address completely without
modifying every SMP architecture to add a API-visible hook to every
swap that signals completion. In practice the best we can do is add a
delay. But note the optimization: almost always, the scheduler IPI
catches the running thread and kills it from interrupt context
(i.e. on a different stack). When that happens, we know that the
interrupted thread will never be resumed (because it's dead) and can
elide the delay. We only pay the cost when we actually detect a race.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Patch introduce references to LittleFS instead of NFFS where it
was suitable. In other places NFFS mentions were removed
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
NFFS is removed as it has serious bugs (by design) which haven't
been resolved since extended range of time.
One of most serious issues bunch were described here:
https://github.com/apache/mynewt-nffs/issues/10
Since lack of support NFFS upsterem it doesn't make sense to keep
it in zephyr.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add runtime error handling for k_msgq_cleanup. We return 0 on success
now and -EAGAIN when cleanup is not possible.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
