The CMSDK uart interrupts for TX and RX can either be treated as a
signel interrupt line or distinct interrupts for TX & RX. In the case
that they were distinct we didn't get the ifdef correct based on DTS.
If we have 2 interrupts in DTS we assume they are for TX & RX and thus
build the interrupt support for distinct TX & RX ISRs.
Also, cleanup handling of UART_2..UART_4 to be similar to how
UART_0/UART_1 code is using DT_INST_IRQN(x).
Fixes#30770Fixes#25601
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove support for the Musca-A board. This board is rarely used, few
are available and superceded by Musca-B and Musca-S.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added Tx fragmentation implementation assertion to check
invalid offset use due to any memory corruptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the vendor specific ticker resolution margin in the
central connection initiation offset calculation.
Related to commit 89ab68f242 ("bluetooth: controller:
Vendor specific ticker resolution margin").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the redundant advanced scheduling event margin used
while finding a free space between existing active central
connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the initial connection event length calculation to
when initiating connection so that initiator with advanced
scheduling to place central connections in a non-overlapping
timeline has the correct ticks slot value available.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If userspace is enabled, then the TLS context needs to be
made a NET_SOCKET kernel object. Without this the userspace
cannot access TLS sockets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We assume that all x86 CPUs do have clflush instructions.
And the cache line size is now provided through DTS.
So detecting clflush instruction as well as the cache line size is no
longer required at runtime and thus removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A recent patch removed use of the cfg structure, but left a pointer to
it defined which causes build failures.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The NPCX clock driver was already using devicetree, just need to make a
small tweak to use DEVICE_DT_INST_DEFINE and update NPCX_CLK_CTRL_NAME
to match the label for the "nuvoton,npcx-pcc" clock controller.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a simple pinctrl node for the IOF registers under the GPIO
controller node to be used by the pinmux driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert esp driver:
NET_DEVICE_OFFLOAD_INIT -> NET_DEVICE_DT_INST_OFFLOAD_DEFINE
DT label is already required, so use it and drop CONFIG_WIFI_ESP_NAME
option.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Convert ublox-sara-r4 driver:
NET_DEVICE_OFFLOAD_INIT -> NET_DEVICE_DT_INST_OFFLOAD_DEFINE
DT label is already required, so use it and drop
CONFIG_MODEM_UBLOX_SARA_R4_NAME option.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Switch to use DEVICE_DT_GET instead of device_get_binding for pinmux
device. As part of this change drop the "label" property from
the pinmux devicetree node and update the binding and dts files to
reflect that.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This include make possible to use the arm_arch_timer on
platform such as Cortex-A9 or Cortex-R7 which has support for
ARM Global Timer.
The global timer is a 64 bit incrementing counter, memory-mapped
in the private memory region.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
In some cases we cannot know the BDF up-front, so provide a way to
look it up based on the vendor and device ID.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These have been redefined in various places - better to have them in a
single place that different users can use.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update sample espi driver test to exercise some SAF functionality
based on the limited hardware available. Note the SAF test will
erase a section of the flash. SAF tests are enabled for the EVB only.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Add ESPI SAF features to the Microchip eSPI driver as
a separate file. ESPI SAF depends upon the core eSPI
driver adding the ability to attach the system SPI
flash to the EC eSPI endpoint instead of the host
eSPI controller.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
This adds X86 keyword to the kconfigs to indicate these are
for x86. The old options are still there marked as
deprecated.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The app_kernel benchmarking app has the config file for benchmarking
with floating point enabled, but it was never used. So add it
to the testcase.yaml.
Note that this also limits to run on one CPU on a SMP system as
the resulting numbers would be more consistent among runs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When exiting Stop mode, if system clock is MSI, MSI oscillator is
selected as wakeup from stop clock; otherwise HSI16 oscillator is
selected.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
Provide the LoRaWAN stack with an optional callback to be
called whenever the battery level needs to be read.
In the case of callback not being provided, the LoRaWAN
stack will report 255 (battery level unavailable) as per
the LoRaWAN spec.
Signed-off-by: Kuba Sanak <contact@kuba.fyi>
