This adds support for the local APIC in one-shot mode as the timeout
event source for those cases where the CPU supports invariant TSC but
no TSC deadline capability. It is presented as another timer choice.
Existing Kconfig symbols were preserved to minimize board config
disturbance.
This hybrid approach was implemented kind of backward in the apic_timer
driver but it is far cleaner to carry this here.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Let's replicate a common code pattern for this to be abstracted more
easily in the future. In addition to duplicating the correctness fixes
implemented in the ARM and RISC-V drivers, this eliminates a couple large
runtime divisions.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
- `stm32h745i_disco/stm32h745xx/m4` says "#error Flash driver on M4 core
is not supported yet".
- `mpfs_icicle/polarfire/smp` fails in the compilation of the `spi_nor`
flash driver.
- `cyw920829m2evk_02` fails to build because of undeclared
`cyhal_nvm_*()` functions.
As a bonus, group the excluded platforms under the common part to
avoid repeating them.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
CONFIG_POSIX_API depends on !CONFIG_NATIVE_APPLICATION, which is
incompatible with the native_posix platforms.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Remove the `_MAC` part because those Kconfig options enable only hash
algorithms, nothing MAC-related, and the `_ENABLED` part to align the
naming to the Mbed TLS defines (plus we don't need such a part).
As a bonus, enabling SHA-256 does not automatically enable SHA-224
anymore.
See the migration guide entries for more details on the practical
changes.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Change the type of `cpu_id` to `uint8_t` since that is the type
of `arch_curr_cpu()->id`.
Instead of using precompiler switch (`#ifdef CONFIG_SMP`), use
if-else shorthand instead (`IS_ENABLED(CONFIG_SMP)`).
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The commit caches write_block_size and erase_value to stream flash
context, at init, to avoid calling Flash API multiple times
to get these values at various stages of code exectuion,
at run-time.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Driver did not work on ESP32c3, by specifying pin to be output and
input solve the issue. Improve documentation, to highlight that driver
is requiring open-drain support.
Signed-off-by: Fredrik Gihl <fgihl@hotmail.com>
The coverage_analysis.py while generating report, duplicates
files and functions of components.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
This test feature is not required and was only used as a dependency in
the usb/console example. It is redundant since the sample already
depends on usb_device.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rename nxp,kinetis-lptmr compat to nxp,lptmr.
Because of concerns over breaking downstream users,
keep support for the old compatible temporarily and
make it clear it should be changed.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Remove address-of operator ('&') when assigning `gpio_xxx_init`
function pointer in `DEVICE_DT_INST_DEFINE` macro.
This change aims to maintain consistency among the drivers in
`drivers/gpio`, ensuring that all function pointer assignments
follow the same pattern.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
When channel range is configured in scan params, get the
channel count from `chan_idx` instead of taking a difference
of start and end of the channel range. The `difference` method
fails in case of 5GHz band since channels may not be consecutive
numbers.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
SD IOCTL handling for DISK_IOCTL_CTRL_SYNC was falling through to the
default return statement, and returning an error when disk sync
succeeded. Fix this issue by properly breaking in IOCTL handler.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Added MAX32690EVKit board
For more information about this board please check
https://www.analog.com/
MAX32690 has two core, Cortex-M4 and Risc-V.
Examples can be build by below command for cortex-m4
west build -b max32690evkit/max32690/m4 samples/hello_world
As a shorthand, the soc may be omitted from the build command and
keeping the corresponding forward slashes:
west build -b max32690evkit//m4 samples/hello_world
Co-authored-by: Jason Murphy <jason.murphy@analog.com>
Co-authored-by: Maureen Helm <maureen.helm@analog.com>
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Added ADI MAX series soc, first partnumber is MAX32690
The family structure will be
ADI_MAX
MAX32xxx
MAX32655
MAX32655EVKIT
MAX32655FTHR
MAX32666
MAX32666FTHR
MAX32666FTHR2
MAX32690
MAX32690EVKIT
MAX78xxx
MAX78000
MAX78002
...
When MAX32 MCUs goes to sleep mode debugger could not access it
and flashing fails, ARM_ON_ENTER_CPU_IDLE_HOOK prevent
the CPU from actually entering sleep
by skipping the WFE/WFI instruction.
Due to ARM_ON_ENTER_CPU_IDLE_HOOK is not configurable at the user
space, added a config wrapper as MAX32_ON_ENTER_CPU_IDLE_HOOK.
If MAX32_ON_ENTER_CPU_IDLE_HOOK config being defined (default y)
devicei will not goes to sleep mode in idle state.
To disable it add below line in your configuration file
CONFIG_MAX32_ON_ENTER_CPU_IDLE_HOOK=n
MAX32690 has two core Cortex-M4 and Risc-V this commit adds M4 core
support.
Co-authored-by: Jason Murphy <jason.murphy@analog.com>
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Generating separate log entry at INFO level for every single character
dropped is excessive and leads to log flood. Logging dropped character
in no way helps end user and is really a delayed performance killer that
triggers when CDC ACM buffer gets full.
If user does not want to lose outgoing characters then the solution is
to enable hardware flow control which properly blocks in the case the
output buffer is full.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
If the TXABRT bit from ESTAT is ever set (because of a single failed
transmission), the driver will continue showing an error on every
subsequent packet sent, although it is correctly sent:
<err> eth_enc28j60: TX failed!
The enc28j60 datasheet says under
"12.1.3 TRANSMIT ERROR INTERRUPT FLAG (TXERIF)":
"After determining the problem and solution, the
host controller should clear the LATECOL (if set) and
TXABRT bits so that future aborts can be detected
accurately."
Therefore, clear the TXABRT and LATECOL bits in case of transmission error.
Signed-off-by: Xavier Ruppen <xruppen@gmail.com>
cbprintf_package complains about char usage for %p
string argument and suggests void * usage.
Signed-off-by: Alexander Kozhinov <ak.alexander.kozhinov@gmail.com>
The ARRAY_FOR_EACH() and ARRAY_FOR_EACH_PTR() macros were not
formatting correctly in vs code (and I would guess other
editors).
Add an entry to .clang-format so that the opening brace is on
the same line as the macro.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
When opaque resources have post-write callback set, but
the write is not a Block-Wise write, there is no block_ctx
and the code causes null pointer dereference when calculating
the offset of the data.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The `z_nrf_grtc_timer_get_ticks()` function converts system ticks
to GRTC ticks. It gets the current system tick to calculate an
absolute GRTC value. The same does the test function to provide
an argument to be converted. If the system tick occurs between those
`sys_clock_tick_get()` calls the `z_nrf_grtc_timer_get_ticks()` will
take into account the newer tick while the test estimate bases on
the old tick value. Due to that the maximum result error is 1 system
tick minus 1 GRTC tick which equals (`CYC_PER_TICK` - 1) for GRTC
ticks.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
This commit aligns the GRTC driver to changes introduced in
hal_nordic. Some of the features regarding GRTC sleep/wakeup
functionality has been modified and moved out to the nrfx
driver's code.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
