Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Note that since Cortex-M does not have the thread ID or
process ID register needed to store TLS pointer at runtime
for toolchain to access thread data, a global variable is
used instead.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the common struct fields and functions to support
the implementation of thread local storage in individual
architecture. This uses the thread stack to store TLS data.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the tdata and tbss sections required for thread local
storage. They are in ROM area as these sections are not to be
directly accessed, but copied to thread local storage area at
thread creation.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The z_libc_partition was only enabled when newlib is being used,
and/or stack canaries are needed. This adds a hidden option
where this partition can be enabled if needed, regardless of
whether newlib is used or stack canaries are needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add kconfigs to indicate whether an architecture has support
for thread local storage (TLS), and to enable TLS in kernel.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Arches which have custom swap to main can have _current be
NULL very, very early in the boot process. Check this to
avoid an infinite loop of fatal errors.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add Queue Size and Receive Window information to lpn
callback function to notify upper layer to determine
currently friend node information, which may be used
in future.
Add Callback structure to notification application which friendship
has been changed.
Add function `bt_mesh_friend_terminate` let's app layer determine
terminate friendship manually.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
It's not clear why this error is here. The "formats" array seems to
be limited to "bin" and "hex" only, but every signing tool is going to
have its own idea of what format to emit and what ingredients need to
be used to do that.
In particular, rimage (used for the Intel Audio DSPs) doesn't use nor
generate zephyr.bin (it's very large), so it trips over this failure.
Just present the possibly-empty list of output formats to the Signer
object and let it make the decision about whether an empty formats
list is an error.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The core kernel does not use this yet, but it will be later used
as part of infrastructure for memory-mapping stacks, as detailed
in #28899.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This seems like a typo since all other places accessing bus_segs in
this context use i as the index.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In the MMU code mapping_pos is miscalculated when for example
SRAM_BASE_ADDRESS==0x40000000 and KERNEL_VM_SIZE==0xc0000000 getting a
mapping_pos of 0x0.
The problem is that we must cast the two values to uintptr_t before
casting the result to avoid the rollover to 0.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This IPC protocol is designed to tell the host driver that the audio
firmware is ready. It's not used within the Zephyr in-tree test code,
which does not run under the control of a host driver. And SOF
already does this on its own, the Zephyr attempt to do it first (and
incorrectly) confuses the driver IPC.
Just remove it. This is clearly application code, not platform code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The code that made aligned_alloc work with the 4-byte heap headers was
requesting a block of the correctly padded size, and correctly
aligning the output buffer within that memory, but it was using the
UNALIGNED chunk size for the buffer as the final size of the block
with splitting off the unused suffix. So the final chunk in the
buffer was could be incorrectly returned to the heap and reused,
leading to overlap.
Compute the chunk size of the output buffer based on the
already-aligned output pointer instead.
Initial investigation and fix from Andy Ross <andrew.j.ross@intel.com>.
I reworked his fix, created a test case, and stolen his commit log.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Introduce <dt-bindings/dt-util.h> file. It wraps <sys/util_macro.h>
file exposing all macro base definitions to DTS preprocessor. Once it
contains only prepocessor macros, it can be safely included in DTS,
similar way the <dts/arm/<manufacturer>/pinctrl_<manufacturer>_<soc>.h
files are included.
This provides necessary background to elaborate complex constructions
like variable length macros with zero or more elements.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The <sys/util.h>, in current form, can not be used with DTS as it
contains non-C pre-processor definitions which breake DTS interpreter.
This commit fixes the problem by moving most of preprocessor macros
from util.h to util_macro.h. Since util_mcaro.h contains only
preprocessor macros, without include dependencies, it can be safely
included in DTS. It is similar way the
<dts/arm/<manufacturer>/pinctrl_<manufacturer>_<soc>.h files are
included.
This fix and align the extern "C" closing brack inside non assembly
block.
The issue was raised when try create a macro for pincrtl with a
variable length flag list.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add support to build all current modem drivers (WNCM14A2A, GSM PPP, and
ublox-sara). We need a unique config for ublox-sara to be built since
the networking params conflict with other modem drivers.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We aren't using vnd,serial for anything currently. Remove requiring
interrurpts property as that requirement isn't needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If CONFIG_MODEM_SIM_NUMBERS is 'n' than the data_imei field of struct
modem_context doesn't exist, so add ifdef protection for that case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allows the use of pin interrupt and callbacks for pca95xx family
GPIO expander chips with an interrupt line.
Enable config flag and define a gpio pin for the expander interrupt-
line (INT) in devicetree and the driver will accept pin interrupt
configurations for the expander gpio pins.
Level triggering is supported through emulation.
A worker is used to avoid waiting for I2C in ISR.
Example devicetree node:
gpioext0: tca9539@77 {
compatible = "nxp,pca95xx";
label = "GPIO_EXT_0";
reg = <0x77>;
interrupt-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <16>;
};
Fixes: #27561
Signed-off-by: Bent Ove Stinessen <bent@norbit.no>
Fix ifdef in command inclusion, in practice this meant that
CONFIG_BT_LL_SW_SPLIT and CONFIG_BT_CTLR_ADV_EXT switched meaning.
Added blank lines so that the commands in shell/ll.c are more
easily visible as group.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The struct fs_file_system_t is only useful when defining file system
drivers and is not required for typical application development,
that is why it has been moved to separate file fs_sys.h.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This removes a semaphore unlock in init_spi function
which causes risks of competitive access
Signed-off-by: Clotilde Sattler <clotilde.sattler@stimio.fr>
When we are sending ICMPv6 error message, we need to store the
link local addresses of the received packet somewhere in order
to know where to send the new error message.
Easiest is to store the ll addresses is to the error message
itself, just before where the sent packet will start in memory.
We cannot use the original pkt to store the ll addresses
as that packet might get overwritten if we receive lot of packets.
Fixes#29398
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For compatibility layers like CMSIS where thread objects
are drawn from a pool, provide a context pointer to the
exited thread object so it may be freed.
This is somewhat obscure and has no supporting APIs or
overview documentation and should be considered a private
kernel feature. Applications should really be using
k_thread_join() instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If we call k_mem_domain_add_thread() to a memory domain
the thread already belongs to, do nothing.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Align register names with the ones found in the datasheet. It is easier
to follow datasheet if names are the same.
Some other minor enhancements have also been introduced (comments, use
BIT for bit fields...).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
k_mem_domain objects should not be initialized multiple times,
there's no support for memory domain life-cycles or freeing
memory that an arch_mem_domain_init() may have allocated.
Clearly document this.
The init function has to assume the provided domain is un-
initialized memory so it's not possible to robustly check
for this; a note is left in the arch_ definition to add an
assertion if feasible.
It's really unsafe to call an init function on any kernel
object more than once, but in this particular case if the
memory domain initialization resulted in the creation of
page tables or linked data structures really bad things can
happen. Currently no arch implements arch_mem_domain_init()
yet, but this is changing soon for x86.
One test case currently does this, it will be fixed in
a forthcoming patch.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As a proof of concept, turn USB signals configuration to USB
for nucleo_wb5rg and disco_l475_iot1 boards.
This implicitly remove pull-up on _ID pin, which turn out to
have no side effect.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Improve the documentation of the UUID header by adding documentation
for all helper macros.
Be explicit in which macros that expects host endianness, and which
ones that expects little endian format.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Sets the device tree chosen node for data tightly coupled memory (DTCM)
on i.mx rt boards that aren't already using DTCM as the chosen SRAM.
Leverages the common cortex-m linker section instead of the soc-specific
one.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Removes the DATA_LOCATION Kconfig symbol from the i.mx rt soc series and
refactors corresponding boards to use a device tree chosen node instead.
The external SDRAM is chosen on all boards that can support it;
otherwise the internal DTCM is chosen.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the i.mx rt soc series to enable device configuration data
(DCD) by default when the smart external memory controller (SEMC) is
present. This is in preparation for removing the DATA_LOCATION Kconfig
symbol and using a device tree chosen node instead.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
