Change the GPIO_MMIO32_INIT to take a devicetree node since we want
to use DEVICE_DT_DEFINE. This makes it so that code using
GPIO_DT_SPEC_GET works correctly with GPIO controllers that utilize
GPIO MMIO32.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added net-capture.py script to net-tools project. The script
can be used to view and save the captured network traffic to
pcap file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The typical number of needed translation tables depends on memory
domain usage and userspace support, but also on the virtual address
space width due to the number of translation levels involved.
Reflect that in the default value.
Also fix a related comment where values were off by 1.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This very first version supports the 160x128 pixels adafruit TFT display
Signed-off-by: Kim Bøndergaard <kim@fam-boendergaard.dk>
Signed-off-by: Kim Bøndergaard <kibo@prevas.dk>
First version of a driver for the st773r LCD controller.
Based on st7789v
Signed-off-by: Kim Bøndergaard <kim@fam-boendergaard.dk>
Signed-off-by: Kim Bøndergaard <kibo@prevas.dk>
I2C isn't connected on the KW40Z to anything so configuring the pins
for at and having it enabled in the devicetree don't make any sense.
Additionally, the pins for I2C are currently conflicting with the UART
pins, which is another reason to remove the I2C config.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we are building the driver with CONFIG_UART_INTERRUPT_DRIVEN=n
we need to ifdef around the decleration of uart_cmsdk_apb_isr()
or we'll get a compiler warning.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The board _defconfig file was trying to set
LOG_MODE_IMMEDIATE unconditionally by default, which
caused a warning when LOG wasn't enabled.
Instead set it only when LOG is enabled.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Modify the testcase design to solve some threads
can't lock mutex. Using array index to detect the order
of threads getting mutex instead of delaying.
Fixed#34116
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
The structure for the arm64_cpu_init array has to carry the cache
alignment on the whole structure and not on some internal padding
to achieve the desired effect.
And align struct __esf to a 16-byte boundary which will also align
its size accordingly. This structure is allocated on the stack on
exception entry and the ABI prescribed 16-byte stack alignment
should be preserved.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Replace k_work_cancel_delayable() with k_work_cancel_delayable_sync()
to make sure that the submitted work becomes idle before accessing
sensitive data.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit implements the secondary service
Audio Input Control Service (AICS) server and client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
``arduino-header-r3`` was incorrectly referred to as
``arduino-r3-header``.
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
STM32Cube updates:
stm32cube: update stm32l5 to version V1.4.0
stm32cube: update stm32l4 to version V1.17.0
stm32cube: update stm32g4 to version V1.4.0
stm32cube: update stm32f7 to version V1.16.1
stm32cube: update stm32f4 to version V1.26.0
stm32cube: update stm32g0 to version V1.4.1
stm32cube: update stm32h7 to version V1.9.1
stm32cube: update stm32mp1 to version V1.4.0
update stm32cube/common_ll
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adds feature allowing to use yaml file with dictionaries defining
tests to be quarantined (extra arg "--quarantine-list FILENAME").
The dictionaries are validated according to the proper schema
and loaded.
A flat list is created containing quarantined configurations
(configuration = platform + scenario). Configurations under quarantine
are skipped and get "Quarantine" as a reason in the results reports.
A "comment" can be added to a quarantine entry in the quarantine yaml
with more details (e.g. issue #) and it will be also added to
the report.
The status of tests under quarantine can be verify if
`--quarantine-verify` is used in addition to
"--quarantine-list FILENAME". Using these args will make twister skip
all tests which are not on the quarantine list.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Flag was present only when ZLI was enabled. That resulted in additional
ifdefs needed whenever code supports ZLI and non-ZLI mode.
Removed ifdefs, added build assert to irq connections to fail at
compile time if IRQ_ZERO_LATENCY is set but ZLI is disabled. Additional
clean up made which resulted from removing the ifdef.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Enabling flash support for nucleo-l152re in device tree.
This has been tested with flash sample application on
nucleo-l152re platform.
Documentation has been updated.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Enabling flash support for nucleo-g071rb in device tree.
This has been tested with flash sample application on
nucleo-g071rb platform.
Documentation has been updated.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Enabling flash support for nucleo-f103rb in device tree.
This has been tested with flash sample application on
nucleo-f103rb platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Projects based on native_posix get a warning indicating that the
LOG_MODE_IMMEDIATE choice symbol is selected but no symbol ended up as
the choice selection.
Only set the logging mode if logging is enabled.
Signed-off-by: Keith Short <keithshort@google.com>
In CI we typically build for "default" platforms. However some
testcases that set "platform_allow" may have no overlap with the default
platforms and thus thoses testcases will not get built.
Change the platform selection logic in these cases to set the platforms
to the list of allowed platforms ("platform_allow") in the testcase.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
With this patch, the UCPD1 _CC1 and _CC2 pins
are disabling the USB Type-C and Power Delivery Dead Battery.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
With this patch, the UCPD1 _CC1 and _CC2 pins
are disabling the USB Type-C and Power Delivery Dead Battery.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
With this patch, the UCPD1 _CC1 and _CC2 pins
are disabling the USB Type-C and Power Delivery Dead Battery.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
ESP32 requires some content as fatal.c rodata to be
placed into RAM to allow cache disabled exceptions.
The consequence is that it will trigger missing log_strdup
call when normal exception is called. Disabling that by default
fix the error and stops terminal output flooding warning event.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The source clock of the watchdog module is selected to the input of T0
timer, not output. Correct the drawing in case confusing the users.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL adds support for console expired mechanism. It implements the
notification to power management module that the module for console is
in use. If the interval that module doesn't receive any input message
exceeds CONFIG_SOC_POWER_CONSOLE_EXPIRED_TIMEOUT, the power management
module is allowed to enter deep sleep mode. This mechanism gives a
window in which the users can organize console input.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL introduces two configuration options which allows a notification
to the power management module that the UART console module is in use
now. If the interval of console module doesn't receive any input message
exceeds expired timeout, the power management module is allowed to enter
sleep/deep sleep state and turn off the clock of console module.
This mechanism gives a window in which the users can organize input
message if CONFIG_PM is enabled.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
NPCX watchdog driver has a WDT_NPCX_DELAY_CYCLES for delay the watchdog
reset time after the watchdog timeout. For some systems, users would
like to use the watchdog timeout ISR but don't reset the chip
immediately. Let the system have the final chance to ongoing the system
before the real hardware reset time. Removing the watchdog reset
waiting loop in ISR lets users decide whether wait for watchdog reset
by themself.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
The GSG link is no longer valid. This commit fixes the link to
use the site recommended by ACRN developers.
Fixes#34149
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Add a note in the Kconfig help text that explains why Hard ABI
is not possible on builds with TF-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When building with TFM, the app is linked with libraries built by the
TFM build system. TFM is always built with -msoft-float which is
equivalent to -mfloat-abi=soft. FP_HARDABI adds -mfloat-abi=hard
which gives errors when linking with the libs from TFM since they are
built with a different ABI.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/33956
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
