Convert over arc based boards to use device tree instead of board.h to
describe buttons & LEDs. There are a few boards that the button gpio
flags need validation.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
usb_dc_status_callback() parameters are interface or configuration
numbers and should be const.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactor USB writes, start transfer only when device
is configured, the change makes it possible to work with native_posix
USB virtual controller.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adding status callback allows to control report sending only when i.e.
device is connected or configured.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If we receive a valid gratuitous ARP request, then update ARP
cache accordingly. This feature is optional and by default
it is enabled, but can be turned off if needed.
This is similar to a feature available in Linux, and is enabled
by default in many distros.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some terminals literally interprets shell output data. Hence to print
a message in new line shell needs to send `\r\n` each time. To minimize
flash usage user can now send `\n` as a line delimiter and shell will
automatically add missing CR character.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The wifi mgmt does only support TCP/IP offload wifi chip,
while non-offload wifi chip can not scan/connect to AP.
Signed-off-by: Dong Xiang <dong.xiang@unisoc.com>
Add hide-defaults-note to the .gitignore file to prevent
people from commiting it by mistake.
Also add the Eclipse .settings folder.
Also ignore all the .*project file (IDEs typical pattern for
project files)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In a429104095
A hide-defaults-note file was introduced by mistake
in Zephyr's root folder. This file should not have been
commited => remove it
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This patch adds a driver for Intel PRO/1000 Gigabit Ethernet controller.
The driver currently supports only a single instance of the NIC.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
This will be usefull to tell when Ethernet device has its attributes
filled in by DTS rather than by Kconfig.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Convert over SiLabs based boards to use device tree instead of board.h
to describe buttons & LEDs. There are a few boards that the button
gpio flags need validation.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert gpio_gecko driver over to using device tree. Added binding
files, updates to dts for various SoCs that use gpio_gecko.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit updates the mem_domain_apis_test sample and the
mem_protect test, so they can compile and execute in ARMv8-M
platforms, which do not support the P_RW_U_RO access permissions
combination (privileged read/write, unprivileged read-only). The
modification consists of, simply, selecting a different access
permission (P_RO_U_RO) when building for ARMv8-M MPUs with the
unmodified ARM MPU architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In ARMv8-M MPU it is not possible to have the following access
permissions: Privileged RW / Unprivileged RO. So we define
K_MEM_PARTITION_IS_WRITABLE macro separately for v8M and v7M MPU
architectures (in the separate include files).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add support for CONFIG_SYSTEM_CLOCK_DISABLE so applications
may be compiled with CONFIG_REBOOT.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To allow apps to compile with CONFIG_REBOOT,
add a weak stub for sys_arch_reboot which does nothing
in the POSIX arch
POSIX boards may choose to provide a more sensible implementation
if relevant.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Placing it at sys/fcntl.h was due to mimicking internal newlib's
layout, but what we need is this file at the standard location,
for reuse.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Limit the amount of bytes to write to EP0 to 64 bytes so that there is
no overflow or error when sending.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
USB controller was performing the fragmentation by itself and the driver
was not aware if current chunk is the last one if data size is equal to
maximum chunk size. Some hardware controllers (i.e. in nRF52840) handle
the status stage by hardware which must be triggered after the last data
chunk.
Currently, the whole remaining data is passed to the driver, and the
driver decides whether to fragment the data internally, or send only
the chunk and report back to the stack.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
This commit removes the Kconfig symbol definitions
that signify the UARTE_1 pins. The symbols are
already removed for UARTE_0.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Extended ring buffer to allow storing raw bytes in it. API has been
extended keeping 'data item' mode untouched.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Deprecate API prefixed with sys_ring_buf_ and rename it
to ring_buf_item_ since this API is not a typical ring buffer
but ring buffer of data items (metadata + 32bit words).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add maximum-speed property to usb nodes and set it to
their maximum on-chip PHY capability.
SoCs with USB device controllers only support full
speed, so we don't add maximum-speed to these nodes.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Add maximum-speed property to usb node.
It configures USB controllers to work up to a specific speed.
Valid arguments are "super-speed", "high-speed", "full-speed"
and "low-speed".
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This commit fixes the issue that if a thread is waiting on recv for
data and the user closes the socket, the waiting thread is not
unblocked.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
A new CAN API is now provided in stm32cube packages.
STM32 can driver is implemented on top of initial CAN API which
is now legacy API.
Disable new API and enable legacy.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
