Bind the network interface to the network interface we
have received the DNS servers from. This is now the default.
The previous behavior can be restored by disabling the
CONFIG_NET_DHCPV6_DNS_SERVER_VIA_INTERFACE option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Bind the network interface to the network interface we
have received the DNS servers from. This is now the default.
The previous behavior can be restored by disabling the
CONFIG_NET_DHCPV4_DNS_SERVER_VIA_INTERFACE option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to specify which network interfaces to bind the
server to when reconfiguring the DNS system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add option in enum phy_link_speed to disable auto-negotiation.
This allows PHY drivers to support disabling auto-negotiation.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
This commit fixes infinite loop reported in
https://github.com/zephyrproject-rtos/zephyr/issues/91242, not deallocating
array with virtqueues and not deactivating the virtqueues in case of
failure
Signed-off-by: Jakub Michalski <jmichalski@antmicro.com>
Add support for setting RGMII RX and TX internal delays via DT properties:
`ti,rx-internal-delay` and `ti,tx-internal-delay`.
Signed-off-by: Venkatesh Odela <venkatesh.odela@amd.com>
is_area_readable is used for SOCS other than LPC55XXX chips, not just
chips other than LPC55S36. Change the condition which elides this code
to avoid a GCC 14.3 warning.
Signed-off-by: Keith Packard <keithp@keithp.com>
In the previous code, strnlen could have returned WIFI_SSID_MAX_LEN, and
the following statement ensuring NUL termination would have written one
past the end of the array.
Replace this with code that ensures a NUL termination within the bounds
of the array and then use strlen to compute the length.
Signed-off-by: Keith Packard <keithp@keithp.com>
We want the stack trace to show the correct nesting of functions,
so we need to prevent the compiler from in-lining functions or
performing tail-call optimizations.
Add __noinline to prevent inlining. Add another printf in each
function to avoid tail calls.
Signed-off-by: Keith Packard <keithp@keithp.com>
GCC 14.3 is not happy when this variable is left uninitialized, although
we don't actually care about the contents, just the address.
Signed-off-by: Keith Packard <keithp@keithp.com>
SUBALIGN forces alignment to the specified value, even if the object
requires stricter alignment. This causes mis-aligned access when accessing
the resulting value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Most uses of this macro should *not* include SUBALIGN as that can reduce
the alignment requirement for data and cause unaligned access faults in
the processor. Leave support for this in place in case there are
still uses for it.
Signed-off-by: Keith Packard <keithp@keithp.com>
SUBALIGN forces alignment of input sections to the specified value, even
if they require stricter alignment.
Signed-off-by: Keith Packard <keithp@keithp.com>
inference_process.hpp depended on the C library implicitly including
stdint.h through some path, which is not defined behavior. Explicitly
include <cstdint> to ensure that uint8_t is defined.
Signed-off-by: Keith Packard <keithp@keithp.com>
This commit adds names to Kconfig choice sysmbols. This allows for their
selection from Kconfig, e.g.:
choice TRACING_FORMAT_CHOICE
default TRACING_TEST if CONFIG_FOO
default TRACING_CTF if CONFIG_BAR
endchoice
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The 50 ms TX mutex timeouts introduced in commit b0a0feb cause
dropped messages when used with the shell log backend. This
commit makes time timeout configurable using the
CONFIG_SHELL_TX_TIMEOUT_MS Kconfig option and makes the
default timeout longer when shell log backend is enabled.
Link: #90215
Signed-off-by: Tommi Kangas <tommi.kangas@nordicsemi.no>
The bt_le_ext_adv_info struct has been extended to also
contain the advertising and periodic advertising states.
Additionally, the function verifies the input to avoid
NULL pointer access, and the addr field is more
properly documented.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
See Discussion https://github.com/zephyrproject-rtos/zephyr/discussions/83659
for information about the purpose of this change.
Modifies run actions of hierarchical state machines
to return a value indicating if the event was handled
by the run action or should be propagated up to the
parent run action. Flat state machines are not affected,
and their run action returns void.
smf_set_handled() has been removed and replaced by
this return value. smf_set_state() will not propagate
events regardless of the return value as the transition
is considered to have occurred.
Documentation, tests, samples, has been updated.
USB-C and hawkBit use SMF and have been updated to use
the new return codes.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
Apply clang-format to USB-C in preparation for code changes
No code is changed, only formatting.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
Implement a check in the CI pipeline to enforce
that property names in device tree bindings do
not contain underscores.
Signed-off-by: James Roy <rruuaanng@outlook.com>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Disable tracing on exit and do not discard data immediately after
enabling tracing. The length of the data depends on the timings of the
host and targets and may simply be an arbitrary length that does not fit
any trace format or frame.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Not all the hooks for k_events, k_lifo, k_fifo, k_msgq, and k_queue are
implemented in tracing_test.h and tracing_test.c and therefore the
testing format cannot be used with the new USB device stack.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
