Soft ap supports WIFI_BTWT_AGREEMENT_MAX BTWT sessions.
The BTWT parameters for each session can be different.
The current usage can only set one set of parameters.
All sessions follow this set of parameters.
Add enhance code to support setting different
BTWT parameters for every sessions.
Usage:
wifi twt btwt_setup <sta_wait> <offset>
<twtli> <session_num>
<id0> <mantissa0> <exponent0> <nominal_wake0>
<id1> <mantissa1> <exponent1> <nominal_wake1>
<idx> <mantissax> <exponentx> <nominal_wakex>
The total number of '0, 1, ..., x' is session_num
For example:
wifi twt btwt_setup 0 0 0 2 0 112 10 128 1 32 10 64
Signed-off-by: Qiankun Li <qiankun.li@nxp.com>
Registers driver with pm_device_driver_init(). Peform
software reset on TURN_ON. Added a small delay after
power-up
Signed-off-by: Van Petrosyan <van.petrosyan@sensirion.com>
The usbd_class_remove_all removes all registered classes from a
configuration. However, it previously left the uds_ctx back-pointer to the
usdb_context set, meaning that if the class is re-registered with the
usbd_register_class function, this fails with the error message "Class
registered to other context at different speed" due to uds_ctx being set to
another context.
This patch corrects the issue by clearing udc_ctx after usbd_class_shutdown
has been called.
Signed-off-by: Joel Holdsworth <jholdsworth@nvidia.com>
zephyr_append_cmake_library attempts to warn the user if a user calls it
to create a Zephyr library while the build is in application mode. At
that stage of the build, the list of Zephyr libraries has already been
processed so the function is effectively a no-op.
This heuristic used to determine if the build was in kernel mode or
application mode checked for the presence of the zephyr_prebuilt target.
This check was broken by a previous commit that renamed this target.
This commit fixes the heuristic by checking for the zephyr_pre0 target.
This was tested by calling zephyr_append_cmake_library from some
application build files, building the application, and seeing the
warning only for the call I added. No warnings were printed for any
Zephyr internal libraries.
Link: https://github.com/zephyrproject-rtos/zephyr/pull/35887
Link: https://github.com/zephyrproject-rtos/zephyr/pull/39959
Signed-off-by: Kesavan Yogeswaran <hikes@google.com>
Fixed typos in the preprocessor macros for pressure range initialization
Unfortunately this particular configuration is not covered in CI since
build_all test has pressue-range "D2" and the broken code was concerning
"D9"
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
OpenThread stack prints just too much data at the info log level,
completely obfuscating the output of the sample, which prints a lot on
its own. Therefore, lower the log level for OT logs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread tries to signal pending tasklets during initialization, which
currently generate an error, as the work queue configured to handle
tasklets is initialized later. This is not a fatal issue, as the
initialization code on the Zephyr side triggers a work item immediately
after the work queue was initialized, but it doesn't look good to have
errors printed on boot.
Therefore, move the work queue initialization before the OpenThread
stack initialization, so that tasklets triggered from OT side can be
signalled properly w/o an error.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
To convey the correct data size, use the 'data->dfs' value instead
of '1' when moving the SPI context to the next buffer.
Signed-off-by: Andreas Wolf <awolf002@gmail.com>
Fix a bug in the touch threshold calculation where channel_num was
incorrectly used instead of channel_sens.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Renames LED_BRIGTHNESS_MAX to LED_BRIGHTNESS_MAX in led.h and all
in-tree users of the macro.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Updated the Rx pin configuration in the lpuart_esp32 driver to fix a
typo and use correct MUX function.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Added a missing return statement in the mmc56x3_decoder_get_size_info
causing incorrect size calculation for single channel data
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
z_vrfy_sensor_reconfigure_read_iodev function was performing a
a K_SYSCALL_MEMORY_READ check using an incorrect structure type.
z_vrfy_sensor_get_decoder wasn't properly checking output
parameter `decoder`
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Corrected the logical operator (||, not |) in the condition that checks
for successful acquisition of RTIO SQEs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Corrected the logical operator (||, not |) in the condition that checks
for successful acquisition of RTIO SQEs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes an error:
error: designator order for field 'http_service_desc::backlog'
does not match declaration order in 'const http_service_desc'
When compiled for C++
Signed-off-by: Pavel Maloletkov <pavllick@gmail.com>
Specific flash driver is used for stm32wbax when ble is
enabled. A simple typo error was fixed to properly build
all the samples where flash and ble are enabled,
such as the peripheral one.
Signed-off-by: Alessandro Manganaro <alessandro.manganaro@st.com>
MPS4, similar to MPS3 Corstone-310, splits code between DTCM and SRAM
and thus requires similar handling.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Add MPS4 pinctrl support by referring to
`mps4/common/partition/platform_base_address.h`
from TF-M's main branch.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Add initial support for the MPS4 Corstone-320 platform, including board
and SoC definitions. This platform features a Cortex-M85 CPU with an
Ethos-U85 NPU and runs in simulation using the FVP_Corstone_SSE-320
Fixed Virtual Platform.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Update HAL to fix wifi IRQ allocation for ESP32-S3.
HAL code depends on ESP_WIFI_TASK_CORE_ID symbol to properly build
the reserved IRQs table. If define is not present, IRQ 0 (wifi) is
not reserved, causing interrupt allocation problems.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
move mov r7, #0 to use it on both branches as aarch64
implementation uses wzr which returns 0 on read
but r7 might have an undefined value after a reset.
Signed-off-by: Julien Racki <julien.racki@st.com>
Adds skeleton dtsi for u5f9 for u5g9 to inherit from
Moves the peripheral nodes into dtsi's that actually has the peripheral
and includes them for SoC's higher in the series where applicable.
signed-off-by: Harris Tomy <harristomy@gmail.com>
