The returned values from function calls should
be ignored since these function calls are dummy reads.
fixes#90480
Signed-off-by: Wajdi ELMuhtadi <wajdi.elmuhtadi@we-online.com>
With the commit fe3c001eeb ("usb: device_next: disable high-speed USB
device descriptor if not used") there is no high-speed device descriptor
by default.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
clock control is required for "fast instances" so assert clock
is enabled alongside PM DEVICE RUNTIME. Update UART tests to
reflect this requirenment.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The UART_NRFX_UARTE_USE_CLOCK_CONTROL is no longer used and
incorrectly selects CLOCK_CONTROL if UARTE120 exists. Remove
it.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Currently the config CLOCK_CONTROL_NRF2 is used as a GLOB
style config which includes all "NRF2" drivers and related
configs.
With NRF2, clocks are treated as individidual devices
with individual device drivers. This commit split the
CLOCK_CONTROL_NRF2 config into device specific configs
and ifdefs. With this, drivers are selected individually
based on devicetree state as is common for most devices
drivers, and dependencies like NRFS and specific NRFS
services are selected by the specific driver which nees it.
Checks for CLOCK_CONTROL_NRF2 are updated to check for
existance of the clocks instead.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Currently there is a mismatch between the naming of the hardware and
the drivers targetting the hardware. nrf2_ is used instead of
the actual bindings names, like nrf2_audiopll instead of
nrfs_audiopll. This makes it hard to map drivers to the hardware
they are targetting.
There is historical reason for some of this, namely the same binding
name was used for different hardware, which is why nrf2_ was used
on newer platforms. This is no longer the case though, so drivers
and configs can be named according to the hardware without conflict.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Fix the description of nrf_clock_control_get_startup_time which was
missing documentation of the spec param and had a spelling mistake
in it.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add snippet that can be used to enable packet trace output from
Silicon Labs Series 2 devices.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The Packet Trace Interface is a debug interface that emits TX and RX packet
data over a serial connection in real time.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Add a new driver class for drivers related to debugging, such as
trace hardware, performance counters etc.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The target variable is a `uint8_t`. It is not reasonable to pass a
value with `uint16_t` in little-endian format.
Remove `sys_cpu_to_le16`, and pass the value directly.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Add a new sample demonstrating the use of the Renesas ELC
Signed-off-by: Khanh Nguyen <khanh.nguyen.wz@bp.renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Add a new test suite for the Renesas ELC driver.
Signed-off-by: Khanh Nguyen <khanh.nguyen.wz@bp.renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Add ELC nodes to RA SoC DTS files and provide
device-specific ELC signal enums for Devicetree bindings
Signed-off-by: Khanh Nguyen <khanh.nguyen.wz@bp.renesas.com>
Add support for the Renesas RA Event Link Controller, including
driver sources, Kconfig, and Devicetree bindings.
Signed-off-by: Khanh Nguyen <khanh.nguyen.wz@bp.renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
make sure the hal is stopped, before
configuring the link. The phy can change the
speed without notifying a link down in between.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
When using target mode, we've found that some times the msg field can
be null through some of the code paths of the interrupt event handler.
Signed-off-by: Yuval Peress <peress@google.com>
Avoid k_sleep() never being called when video_write_reg_retry() and
video_read_reg_retry() have a number of retry set to zero (default).
The default number of retries being controlled by
CONFIG_VIDEO_I2C_RETRY_NUM.
Signed-off-by: Josuah Demangeon <me@josuah.net>
When using Zero Latency IRQs do not invoke ISR_DIRECT_PM and
do not return to reschedule in the kernel.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The `owned-channels` property specifies which channels are assigned to
a given target. Additionally, the `source-channels` or `sink-channels`
property defines channels that can be used to forward an event outside
the DPPI domain, otherwise they can only be used within it.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
The async_user_callback could be triggered from
both the DMA transfer complete interrupt and
a k_work queue timeout. Since the timeout runs
outside of an ISR context, it could be interrupted
by the DMA ISR. This might leads to a race condition
where both paths access and modify shared
DMA buffer state (offset and length) simultaneously,
causing data corruption or out-of-sequence processing.
Introduces proper synchronization to prevent concurrent
access to shared DMA buffer variables,
ensuring consistent and reliable data handling.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Add clear, step-by-step guide for generating test certificates using
FreeRADIUS scripts, including file renaming and usage notes.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Fixes the JEDEC-ID value of the W25Q32JVWJ on-chip flash of RT1024.
It was incorrectly set to the value for the different IS25WP064 chip.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Allow network shell DNS module to verify that the DNS SD
record is a valid one. Currently this is not exposed to
applications.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fixes building an lvgl sample with CONFIG_CPU_LOAD enabled.
cpu_load_get function requires 1 argument.
Signed-off-by: Matthias Alleman <matthias.alleman@basalte.be>
In high throughput tests it's fairly easy to overflow the current 32-bit
byte counters in net statistics (it's just over 4 GB of data).
Therefore, make the byte counters 64-bit to prevent overflows.
Rearrange some fields to avoid padding.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
net_stats_t type is an unsigned type, therefore %u should be used
instead of %d when printing values of this type, otherwise negative
values will be printer if INT32_MAX is exceeded.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Microchip is adding more non-MEC devices to Zephyr such as
SAM and PIC32. Each device family will have its own subfolder.
We moved the existing MEC DTSI files into a new mec subfolder.
We also updated the existing MEC boards include paths.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Updated driver based on changes done in SDK 25.06.00-pvw2.
Update hal_nxp to include BLE LL and IEEE 802.15.4 PHY NBU
combo firmware for MCXW72 boards.
Signed-off-by: Cristian Bulacu <cristian.bulacu@nxp.com>
