Enable pinctrl for ethernet mcux driver, and update kinetis DTS node to
include labelling for PTP node, to enable driver to access pinctrl
properties.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
`reset_cause` with no arguments will print the device id.
Change it to print the reset cause.
Tested on nucleo_f767zi.
Signed-off-by: Cezar Burlacu <cezar@embeddedp.ro>
Do not use __disable_irq when Zero Latency IRQs are enabled
and the Zephyr open source Bluetooth Controller is used with
Zero Latency IRQs support.
Application shall ensure their Zero Latency IRQ ISRs do not
invoke any kernel APIs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add an explicit Kconfig option to enable use of
__disable_irq() in nRF RTC timer driver to prevent higher
priority contexts (including ZLIs) that might preempt the
handler and call nrf_rtc_timer API from destroying the
internal state in nrf_rtc_timer.
Relates to commit fcda8699cb ("drivers: timer: extend
nrf_rtc_timer").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add build time optional PINCTRL support to common PWM driver
for Microchip XEC MEC15xx and MEC172x families.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Add support for MEC172x series to Microchip XEC PWM driver.
Standardize device tree properties for both SoC families.
Standardize device structure usage.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
G4 series have specific LL ADC API that discriminate ADC1 and ADC5
channels. Take this into account in adc_stm32_setup_channels().
Additionally, fix this function to use LL defines as argument of macro
__LL_ADC_CHANNEL_TO_DECIMAL_NB, as good practice.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The NRF_TWI_Type struct doesn't have an homogeneous layout between
nRF51/52 series. This patch tries to select the right layout based on
selected SoC.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Avoids segfault in situations when we can't acquire an RX buffer, and VLAN
or PTP code is enabled which tries to inspect packets by adding a pkt
check.
Signed-off-by: Alex Sergeev <asergeev@carbonrobotics.com>
Include a pointer to the CAN controller device for the CAN
transmit, receive, and state change callback functions.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add generic support for can_get_max_filters() to the Bosch M_CAN
base driver and use it in all driver frontends.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Extend the macro with checks for DT properties related to pin
assignments that are defined but would be ignored, depending on
whether PINCTRL is enabled or not, what presumably indicates
a resulting configuration different from what the user expects.
Add also a possibility to indicate that the pinctrl-1 property
should not be checked because the caller does not support the
sleep state.
Rename the macro so that its name better reflects its function.
Update accordingly all drivers that use it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
When configuring the pwm capture, the callback function might
be reset, this i not an error. However the isr should not call it
and enabling the capture should always provide a callback function.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Timing registers of I2C 0/1/2 can be adjusted to pass SI test.
We can control the tSU;STA and tHD;DAT simultaneously by changing
the value of the register IT83XX_SMB_4P7USL, and we can control
the tSU;DAT by changing the value of the register IT83XX_SMB_250NS
as well.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
As mentioned in #42882, the I2C of IT8XXX2 is designed for two different
IP blocks, so this PR divides this I2C driver into two compatibles.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
A nordic hal update was made around the same time that anomaly 122 on
nrf52840 was fixed. This update introduced qspi_pins_deconfigure() in
the nrfx_qspi_uninit(). With that, the CS pin from QSPI becomes a
floating pin after anomaly 122 uninit is executed.
Set the CS pin high after the uninit to fix this.
I'm assuming that floating CS pins that are likely to experience EMI
can impact power consumption. That was the case with my custom board.
My custom board with nrf52840 and MX25R3235F running the hello_world
sample was consuming 2.3 mA before this patch, and 30 uA after
applying it.
Signed-off-by: Rodrigo Brochado <git.rodrigobrochado@gmail.com>
Values of boolean DT properties need to be checked with DT_PROP(),
not DT_NODE_HAS_PROP(). Fix two such incorrect calls in the nRF UART
driver.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This macro incorrectly uses DT_NODE_HAS_PROP() to check the truth value
of the "disable-rx" boolean property. In consequence, it always assumes
that RX is disabled and the low power mode needs to be used. Fix this
by replacing the check with DT_PROP().
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Using IRQ as source for interrupt values can
fail when installing irq_connect_dynamic, as
IRQ can previously be enabled. This updates
the logic to use source map and allows
default irq_enable() and irq_disable() to call
esp32c3 interrupt allocator implementation.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
After the ADC interrupt is enabled, the interrupt will be triggered
and the ADC channel valid data will be read, so there is no time
limit here.
Refer to the timeout is also set to K_FOREVER in the function of
adc_context_wait_for_completion().
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
In 90c6dc5e7f, a change was introduced to
allow modem commands determine if they have enough data or not.
In a situation where some data is missing, the command should return
-EAGAIN and this should lead to another call of the command with more
data.
In this commit, the argument parser was also allowed to return -EAGAIN
to request more data due to missing arguments.
However, this can't work because in cmd_handler_process_rx_buf() before
calling process_cmd():
- we make sure that a CR/LF has been found.
- we compute match_len which can't be greater than the distance to the
next CR/LF.
Therefore, even if the command argument parser ask for more data by
returning -EAGAIN, next call will have the same value for match_len,
meaning that the parsing of argument will result in the same missing
argument situation.
This leads to an infinite loop of parsing the same data over and over in
an infinite loop.
This commit change this behavior to always drop the data in such a
situation. The command will not be answered and will therefore timeout,
but at least, next commands will correctly parse their returned data.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
This API has be removed in Zephyr 2.8, and does not need to be used
as a static function. Because flash_it8xxx2_write_protection(false)
is not supported. If the IT83XX_GCTRL_EPLR register in the
flash_it8xxx2_write_protection(false) is written as 1, the flash
write region will not be protected later, only be cleared by
power-on reset.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The pm_constraint_* APIs were effectively used by the policy manager
only. This patch renames the API to the policy namespace and makes its
naming more explicit:
- pm_constraint_set -> pm_policy_state_lock_get()
- pm_constraint_release -> pm_policy_state_lock_put()
- pm_constraint_get -> pm_policy_state_lock_is_active()
The reason for these changes is that constraints can be of many types:
allow/disallow states, impose latency requirements, etc. The new naming
also makes explicit that the API calls will influence the PM policy
behavior.
All drivers and documentation have been updated accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
the device data struct pointer is passed to the thread function when
creating the thread, but the thread function did a int-to-pointer cast
which did not work as intended, causing exception during runtime.
now, we just pass the pointer directly without casting, which is the
pattern seen in other sensor drivers.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@escolifesciences.com>
Re-running the script that checks for the const qualifier missing on
struct device ISR's parameter.
The script also changes the parameter 'arg' to 'dev' when relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
