The required jlink script was not added due to missing entry in the
board check. Also change the check for app vs rad to be on SOC level.
Signed-off-by: Håkon Amundsen <haakon.amundsen@nordicsemi.no>
- Sets MAIN_STACK_SIZE in prj.conf to 2048 (default is 1024)
to avoid possible stack overflow
and adding new .conf files per board.
- Deletes existing board .conf files, as they are not needed anymore.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The flash size is the second part (size) of the first reg value, not the
first part (address) of a nonexistent second reg value.
Based-on-patch-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Signed-off-by: Tim Pambor <tim.pambor@codewrights.de>
Extend timeout on k_mem_slab_alloc() for kernel.memory_slabs
memory_slab_1cpu.mslab test suite as a workaround to allow its run
on slow platforms, e.g. simulated intel_ish_5_8_0.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
For enterprise mode we need to install multiple certs to the TLS
credentials store, so, add a helper script in python to make it work
cross-platforms.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This commit fixes all includes in testlib according to IWYU rules and
sorts all includes in ascending order by name.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This commit adds an option to verify weather the host has read the value
after the wire 3-0 bits have been updated.
Signed-off-by: Tom Chang <CHChang19@nuvoton.com>
When compiling with C++ enabled (CONFIG_CPP), add an unused member to
prevent an empty struct; this makes the struct size the same for both C
and C++.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
As the sample uses VLAN which needs Ethernet support make sure
CONFIG_NET_L2_ETHERNET is set in prj.conf file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Commit 6a2cbc7c87 ("boards: nrf53*: add L|HFXO configurations") missed
the fix for nRF7002DK which is also based on nRF53 SoC.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Aleksandar Stanoev <aleksandar.stanoev@nordicsemi.no>
Refactored stepper move_to calls and move_by calls.
Now, relative movement required or absolute target position
is calculated and then redirected to move_by or move_to calls
respectively.
Signed-off-by: Dipak Shetty <shetty.dipak@gmx.com>
Added missing includes and fixed typos in the header files
for Bluetooth.
There is one exception in hci_vs.h where `struct arch_esf`
is still missing an include, but that is because that
is only specific for ARM.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use power state pointers instead of copies which improves performance.
Align power_mgmt_multicore test which was creating pm states in
runtime.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
In I3C v1.0, there was a RSTDAA direct CCC. It is deprecated in I3C v1.1
and later. This adds a CCC helper for it.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
This adds a v1.0 support dts flag for devices. This also makes it so it
doesn't try to send a GETCAPS (GETHDRCAP) ccc if this flag is set and it
doesn't support any HDR modes.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Bluetooth had two public types with similar name _bt_gatt_ccc and
bt_gatt_ccc, but for absolutely different purposes.
That caused misunderstanding of relationship of them and cases
where to use which one.
Commit changes name of _bt_gatt_ccc to more suitable by usage and
improves documentation of it.
Additionally, it changes name of BT_GATT_CCC_INITIALIZER
to correspond the type name.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
If something is tagged as nocache it didn't got cleared, which could
lead some weird behaviour where bss memory is non-zero.
Signed-off-by: Peter van der Perk <peter.vanderperk@nxp.com>
The current configuration allocate 476kB (672 − 196) to the NWP. This
configuration is only required with offloaded network stack
(CONFIG_WIFI_SILABS_SIWX91X_NET_STACK_OFFLOAD).
Since this parameter is not set by default, increase memory allocated to
Zephyr.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Chip siwx91x has 672kB of SRAM shared between the Cortex-M4 (Zephyr) and
the NWP (Network Processor). 3 memory configurations are possible for
the Cortex-M4:
- 196kB
- 256kB
- 320kB
Less memory is allocated to Zephyr, more memory is allocated to NWP,
better are the WiFi and BLE performances.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Some instances of DMA (dma0) can use the normal sram to store their
descriptors. In this case, it makes sense to allow the linker to
allocate the memory rather than tweaking the memory layout.
So, if the attribute silabs,sram-region is not defined, use a statically
allocated buffer.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
DMA can be initialized with the other devices. The user only need to the
ensure CONFIG_DMA_INIT_PRIORITY is less than the DMA consumers.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Memory areas for DMA descriptors are shared with the DMA hardware block.
There area should be cached by the CPU.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Silabs siwx91x hardware use specific memory areas to store descriptors
for DMA requests. These areas are tightly coupled between the CPU and
the hardware. This helps in reducing the wait cycles.
Until now these addresses was also hard coded in the DT and in the
linker script. This patch leverage the zephyr,memory-region driver to
centralize the information in the DT.
Then, with this new implementation, the memory mapping is easier to
understand for the reader.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Add more tests cases to the AF_PACKET sockets test suite, covering the
summary of the packet socket functionalities prepared from various
sources (mostly man pages).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure that when sendto is being used without the socket being bound
before, a correct interface is used for transmission. As
zpacket_sendto_ctx() calls net_context_recv() to register receive
callback before sending, a default binding was used by the context
layer, which would bind the socket to the default interface. This could
lead to unexpected results, i.e. packet being sent on a default
interface, even though a different one was specified.
Make also sure that there is no ambiguity in the interface selection -
the application should be explicitly clear what interface it wants to
use when it comes to packet sockets. It's better to return an error if
no valid interface was specified.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
According to AF_PACKET man pages protocol number 0 is allowed, however
in such case the socket is only capable of transmitting packets then:
"If protocol is set to zero, no packets are received."
Therefore, allow to create sockets with such protocol, and at the
connection.c level filter out such sockets from data reception.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The test case did not do what it said, it was supposed to receive data
on both RAW and DGRAM packet sockets, but instead it received on RAW
socket twice.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Test interface configuration doesn't change throught the test suite
execution, therefore there's no need to reiterate the interfaces to set
the interface pointers in each test case. Do it just once, when test
suite is setup.
Also remove the __test_packet_sockets() function which seemed no longer
useful with all those simplifications.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Packet socket tests used non-blocking sockets so in results the test
code was overly complicated with delays and loops scattered all across
the test code, making it difficult to read.
As packet sockets do support blocking operation with timeout,
reconfigure the sockets to use that and simplify the test code by
getting rid of unnecessary loops and delays.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Test suite prints a warning on boot about not enough IPv4 context
instances compared to the number of interfaces, therefore adjust the
config value to get rid of it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure all sockets used in test are closed even in case of test
failure. Otherwise, a single test failure could derail other tests,
making the results obfuscated.
Remove redundant code related to socket creation.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add link check support, by adding:
- link check callback in response of LinkCheckAns.
- link check request function using LinkCheckReq.
Signed-off-by: Martin Durietz <martin.durietz@gmail.com>
