Add a Coccinelle script that adds an 'U' to values assigned to
unsigned variables, according ot MISRA-C rule 7.2.
Add a 'report' mode to the script that can be used by developer/CI
and a 'patch' mode that should do the heavy lifting.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Some toolchains are built with multilib enabled in order to provide
multiple versions of the same library, optimized for different ABI
or architecture. They require the the ABI/architecture/CPU selection
options to be passed at linked time. This is important for example
when linking with newlib.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Some toolchains are built with multilib enabled in order to provide
multiple versions of the same library, optimized for different ABI
or architecture. They require the -march= and -mabi= options to be
passed at link time. This is important for example when linking with
newlib.
We do that by passing zephyr_ld_options the same arguments than
zephyr_compile_options. The -mabi option is passed directly while the
-march option, if defined, is passed through ${ARCH_FLAG}.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Improved reception in the backend and replaced thread
with periodic timer as thread was used only to
periodically poll RTT data availability and using timer
is more RAM-wise efficient.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
S1000 i2c test was blinking only blue and red lights. However, if
we have to distinguish between 2 test images for whatever reasons,
it is handy to have one test image blinking blue-red while the
other blinks green-white.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Idle rate functionality has been implemented for HID USB class.
Bassed on Device Class Definition for Human Interface Devices 1.11.
Tested with USB3CV and host with idle rate.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
HID class now defaults to universal request callbacks in case they
are not provided by the application. This applies to following,
class-specific requests: Get_Report, Set_Report, Get_Idle, Set_Idle,
Get_Protocol and Set_Protocol.
Tested with USB3CV.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Allow logging subsystem to send the logging messages to outside
system. This backend implements RFC 5424 (syslog protocol) and
RFC 5426 (syslog over UDP).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rephrase some help messages to decrease flash usage.
Deactivate shell history feature for test test_netusb_rndis
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Resize command requires shell to be working on UART interrupt
driven API. This will be now enabled by default when shell serial
backend is selected. Recently this feature was accidentally turned
off in PR #11556.
k_sleep(1) has been replaced with k_busy_wait(1000) to avoid
hanging in command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Shell used to require adding commands and subcommands in alphabetical
order to ensure correct autocompletion and printing options with the
<Tab> key.
Commit: bd3a4e5fe5 implemented correct
options printing with the <Tab> key for not sorted commands.
This PR allows to partially autocomplete not sorted commands.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Allow user to add externally built hex files to the cmake property
HEX_FILES_TO_MERGE. The hex files in this list will be merged
with the hex file generated when building the zephyr application.
This allows users to leverage the application configuration
available in Kconfig and CMake to help decide what hex file
should be merged with the zephyr application.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
The driver can be tested using different networking emulation
approaches.
This approach will work across multiple Qemu instances. There can be
more than one Qemu instance, run using the following command. They
would appear to be on the same Ethernet network.
$ qemu-system-arm -M lm3s6965evb \
-serial stdio \
-net nic \
-net socket,mcast=230.0.0.1:1234 \
-kernel zephyr.elf
This approach will work with other virtualization technologies that
support connecting to a VDE switch, like VirtualBox and User Mode
Linux. The switch can be started using the following command.
$ vde_switch --sock /tmp/switch
Qemu can be connected to the switch using the following command.
$ qemu-system-arm -M lm3s6965evb \
-serial stdio \
-net nic \
-net vde,sock=/tmp/switch \
-kernel zephyr.elf
Signed-off-by: Fadhel Habeeb <fadhel@zilogic.com>
Signed-off-by: Nirav Parmar <niravparmar@zilogic.com>
Signed-off-by: Vijay Kumar B <vijaykumar@zilogic.com>
Add missed out helper functions to update the errors.tx and error.rx
in the stats structure.
Signed-off-by: Fadhel Habeeb <fadhel@zilogic.com>
Signed-off-by: Nirav Parmar <niravparmar@zilogic.com>
Signed-off-by: Vijay Kumar B <vijaykumar@zilogic.com>
This patch adds dts/bindings/adi,adxl372-spi.yaml for
using ADXL372 on SPI bus instead of I2C which is used
in dts/bindings/adi,adxl372.yaml.
Signed-off-by: Jan Tore Guggedal <jantore.guggedal@nordicsemi.no>
The LFSTARTED event was disabled so it was impossible to wake the
CPU up on LF clock being ready. The Bluetooth stack was putting
the CPU to sleep, expecting to be woken up on LFSTARTED event.
As the event never triggered, the CPU was woken up seconds later
by a different event introducing a multi-second startup delay.
Bug introduced by 23c92100ac.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Timestamp function and pool for log_strdup were initialized
in log thread initialization while they should be initialized
in log_core_init() which is performed earliest possible. Log
API was using uninitialized data when called before log thread
was started.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The STM32L433 has the same layout than the STM32L432, additionally it
has GPIOD, GPIOE, I2C2, USART3 and SPI2.
Also move USART3 and SPI2 out of stm32l4.dtsi since STM32L432 does not
have it.
Fixes#10909.
Signed-off-by: Markus Roppelt <markus.roppelt@gmx.de>
This is done to make future modifications simpler,
as more variables and functions are available.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
This is done to make future modifications simpler,
as more variables and functions are available.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
This is done to make future modifications simpler,
as more variables and functions are available.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
This is done to make future modifications simpler,
as more variables and functions are available.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Add symbol which contains the number of bytes contained
in the image.
Using '_image_rom_end' will not work, as there are
symbols loaded after its value.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
gPTP subsystem was calling pow(x,y) function with X and Y being
constants; these are replaced with the pre-computed values.
Signed-off-by: Andrei Laperie <andrei.laperie@intel.com>
SetAddress request (0x05) is ignored and not propagated, because it
is handled by nRF hardware. Curently, request type is not checked
causing class or vendor request 0x05 to be inappropiately ignored.
Only standard requests (type = 0) shoud be ignored. This commit
fixes the issue.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
By using system include directive, we allow
the user to place external SEGGER_RTT_conf.h files to the
include path in order to override the zephyr version.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
